HS+ Tool Head | 2.85 mm | Hardened Steel | 1.2 mm

Produce high-strength parts that retain their dimensional stability in harsh environments in a fraction of the time! The large 1.2 mm nozzle diameter and massive E3D Volcano Heater Block with elongated melting zone is paired with the E3D Titan Extruder to enable extrusion rates of up to approximately 205 grams/hour

Read more
LulzBot Mini v2.0, Boxed for Retail, NA
LulzBot TAZ 3D Printer, Pro Boxed for Retail, NA
LulzBot TAZ 3D Printer, Workhorse, Boxed for Retail, NA
LulzBot TAZ SideKick 289 3D Printer, Boxed for Retail, NA
LulzBot TAZ SideKick 747 3D Printer, Boxed for Retail, NA

A large E3D Volcano Heater Block, massive melting zone, and a 1.2 mm nozzle brings the strongest, fastest prints yet.

The ability to create functional jigs, fixtures, and prototypes on-site in a fraction of the time significantly reduces lead time and cost. 

Parts Included

(1) LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm (Fully Assembled)

(3) Replacement Wiper Pads

(1) Red Scrub Pad


Spec Sheet

Layer Resolution: 0.6 mm - 1.0 mm (0.027 in - 0.039 in)

Filament Diameter: 2.85 mm

Nozzle Diameter: 1.2 mm

Nozzle Material: Hardened Steel

Extruder Hobb Material: Hardened Steel

Hot End Temperature Range: 120°C - 290°C (248°F - 554°F)

Extruder & Hot End: Genuine E3D Titan Aero E3D Volcano Heater Block 

Maximum Extrusion Rate: Approximately 205 grams/hour | 45.69 mm³/s with PLA at 220°C (428°F)

Recommended filament diameter: 2.85 mm diameter (3 mm)

Supported Materials: Carbon-fiber filled Nylon, ABS, PETg, PLA, NinjaFlex TPU

Certified Open Source Hardware: US000148

$ 395 00


Featuring a hardened steel nozzle and extruder hobb, this industrial 3D printer extruder head is capable of printing high-strength composite polymers on par with PEEK's tensile strength (15,200 psi - ASTM638). These polymers are used in a wide range of high-demand applications, from structural components to the automotive industry. 

Parts printed with these composites have higher impact resistance, resist deformation, while retaining strength in harsh and demanding environments. Industrial materials like PA-CF Low Warp combine strength and dimensional stability (less than 2% elongation at break - ASTM638) with the ability to perform in higher operating temperatures up to approximately 120° C (248° F).

HS+ Tool Head | 2.85 mm | Hardened Steel | 1.2 mm

HS+ Tool Head | 2.85 mm | Hardened Steel | 1.2 mm

$ 395 00

A notice about cookies

This website uses cookies. By continuing to browse this site, you agree to their use.

See all options