M175 v2 Tool Head | 1.75 mm | Single Extruder | 0.5 mm

LulzBot honors your freedom to print.
Add 1.75 mm filament capability to your LulzBot 3D printer and open up an even wider variety of 3D printing materials.  The M175 v2 Tool Head is here to bring the world of 1.75 mm material to your LulzBot Mini 2, TAZ Workhorse, and TAZ Pro. 

Read more
LulzBot Mini v2.0, Boxed for Retail, NA
LulzBot TAZ 3D Printer, Pro Boxed for Retail, NA
LulzBot TAZ 3D Printer, Workhorse, Boxed for Retail, NA
LulzBot TAZ SideKick 289 3D Printer, Boxed for Retail, NA
LulzBot TAZ SideKick 747 3D Printer, Boxed for Retail, NA

The 1.75 mm dual-drive extruder on the new LulzBot M175 v2 Tool Head feeds material reliably. Built to handle the toughest industrial-strength materials to the most basic materials, the M175 v2 prints a wide range of filament - from nylon and soft flexible materials to PLA and rigid and brittle carbon-filled high-strength materials. 

Material changes are easy using the quick release lever.  A thumbscrew tensioner allows the you to fine-tune the pressure exerted by the drive gears onto the filament. It provides uninterrupted material flow without fear of grinding or slipping. 

The lightweight hot end provides superior heat break performance - it conducts 85% less heat than a standard threaded heat break. The small hot end mass allows for more rapid motion. 

M175 Airflow

The M175 v2 Tool Head comes with a 0.5 mm Bridgemaster™ nozzle for beautiful, high-resolution prints.

The sturdy fan duct mounts with one screw and has been designed for maximum efficiency using airflow analysis to ensure even 360° part cooling. The fan duct also provides a clear view of the printing surface so you can inspect layer quality during printing.

Parts Included

(1) LulzBot M175 v2 Tool Head | 0.5 mm (Fully Assembled)


Layer Resolution: 0.05 mm - 0.5 mm (0.002 in - 0.020 in)

Filament Diameter: 1.75 mm

Nozzle Diameter: 0.5 mm

Nozzle: Slice Engineering® Bridgemaster™ nozzle

Hot End Temperature Range: 120°C - 290°C (248°F - 554°F)

Hot End Heatup Time: From 23°C to 210°C (73°F to 410°F) in 95 seconds

Extruder & Hot End: Bond Tech BMG, Slice Engineering® Mosquito Hotend®

Required power system: 24 Volts

Fans: (1) 5v 25 mm heat sink cooling fan, and (1)  24v centrifugal print cooling fan

Weight: 436.5 g (0.96 lbs)

$ 375 00


M175 v2 Tool Head | 1.75 mm | Single Extruder | 0.5 mm

M175 v2 Tool Head | 1.75 mm | Single Extruder | 0.5 mm

$ 375 00

A notice about cookies

This website uses cookies. By continuing to browse this site, you agree to their use.

See all options