Loading...

Archim 2.2b PCBA Retail Kit

This all-in-one TAZ Pro 3D printer motherboard is made by UltiMachine using a 32bit Atmel SAM3X8E processor and comes equipped with Trinamic TMC2130 stepper drivers all on one integrated PCB, built in fuses, and more.


Does not come with pre-installed firmware

Read more
Compatibility:
LulzBot 3D Printer, TAZ Pro S, Boxed for Retail, NA
LulzBot 3D Printer, TAZ Pro, Boxed for Retail, NA

Since Archim2.2 is built on the shoulders of the Arduino community, makers and hackers should consider using this motherboard for additional projects beyond controlling a 3D printer.

Curious where the product's name comes from?  Archim is named after the mathematician Archimedes.

Parts Included

• One (1) Archim2.2 electronics board

Specifications

  • Designed and Manufactured by UltiMachine

  • Logic

    • Archim2 is supported in mainline Marlin Firmware as BOARD_ARCHIM

    • Crystals for both usb and mcu (timing accurate to 10ppm)

    • 4 Thermistor jacks

    • All extra pins broken out on both processors (allows using the 32u2 for LUFA AVR programmer, etc.)

    • 2 channel SDRAMPS compatible SPI breakout

  • Stepper Drivers

    • 5 TMC2130 1/8th microsteps motor drivers with 1,1/2,1/4,1/16 as options (2 connectors for Z-axis)

    • SPI (Serial Peripheral Interface) communicated motor current control (no tiny knobs to tweak)

    • Current limit on driver IC VCC to prevent permanent latchup

    • Microstep mode configured by MCU through firmware (no jumpers needed)

    • Test points for driver control signals

    • Step and Direction pins are on their own ports for synchronous movement capability

    • Extra driver ports broken out for up to 3 additional drivers (some of the motor extension pins are shared with max endstop and a pin allocated for SPI-SS extensions)

  • PWM DC outputs (Extruders, Fans, Etc.)

    • 6 outputs

    • Low resistance mosfets for cool running

    • Indicator led for each channel

  • Power

    • Three ATC fuse protected power rails

    • Heated Bed, 15A 12-35V

    • Extruders + fans and logic, 5A 12-35V (fuse can be exchanged for up to 10A capacity)

    • Motors, 5A 12-28V (fuse can be exchanged for up to 10A capacity)

    • SMPS supports hostless printing on power supply voltages from 10-24V DC

  • PCB

    • 4 layer

    • 2oz copper on all layers

    • High quality, High temperature FR4-TG130 PCB

    • Gold ENIG finishing

  • Fuses

    • 3 user replaceable automotive fuses;

      • F2: automotive-type 5A ATO bladed fuse for motors and on-board power supply

      • F3: automotive-type 5A ATO bladed fuse for extruder heater + fan outputs and logic

      • F4: automotive-type 15A ATO bladed fuse for the heated bed

$ 350 00
350.0
{"objectID":2764,"model":{"name":"Archim 2.2b PCBA Retail Kit"},"url_key":"store/archim-2-2b-pcba-retail-kit-kt-cp0155","redirect_url_key":["archim-2-2b-pcba-retail-kit-kt-cp0155"],"main":true,"short_description":"\u003cp\u003eThis all-in-one TAZ Pro 3D printer motherboard is made by UltiMachine using a 32bit Atmel SAM3X8E processor and comes equipped with Trinamic TMC2130 stepper drivers all on one integrated PCB, built in fuses, and more.\u003c/p\u003e\u003cp\u003e\u003cbr\u003e\u003c/p\u003e\u003cp\u003e\u003ci\u003e\u003cfont style=\"color: rgb(206, 0, 0);\"\u003eDoes not come with pre-installed firmware\u003c/font\u003e\u003c/i\u003e\u003c/p\u003e","description":"\u003cp\u003e\u003cbr\u003e\u003c/p\u003e","name":"Archim 2.2b PCBA Retail Kit","short_name":"","seo_title":"Archim 2.2b PCBA Retail Kit | LulzBot 3D Printer","meta_keywords":null,"meta_description":"Made by UltiMachine this TAZ Pro 3D printer motherboard is equipped with a 32bit Atmel SAM3X8E processor and Trinamic TMC2130 stepper driver.","variant_count":1,"categories":[{"id":4,"name":"Parts","url_key":"store/parts","level":0},{"id":40,"name":"Electronics, Boards, \u0026 Power Supplies","url_key":"store/parts/electronics-boards-power-supplies","level":1}],"sku":"KT-CP0155","variant_attributes":{},"price":{"value":350.0,"tax_included":false,"original_value":350.0,"discount":0.0},"hierarchicalCategories":[{"level":1,"value":"Parts","ancestors":["All"],"order":18},{"level":2,"value":"Electronics, Boards, \u0026 Power Supplies","ancestors":["Parts","All"],"order":23}],"filament_material":[],"compatibility":[{"name":"LulzBot 3D Printer, TAZ Pro S, Boxed for Retail, NA"},{"name":"LulzBot 3D Printer, TAZ Pro, Boxed for Retail, NA"}],"description_parts_specification":"\u003ch4 style=\"line-height: 1.25em; padding-bottom: 0.5rem; margin-bottom: 0px; border-bottom: 1px solid rgb(224, 224, 224);\"\u003eParts Included\u003c/h4\u003e\u003cp\u003e• One (1) Archim2.2 electronics board\u003c/p\u003e\u003ch4 style=\"line-height: 1.25em; padding-bottom: 0.5rem; margin-bottom: 0px; border-bottom: 1px solid rgb(224, 224, 224); margin-top: 2.66667rem;\"\u003eSpecifications\u003c/h4\u003e\u003cul style=\"margin-bottom: 0px; padding-left: 30px;\"\u003e\u003cli\u003e\u003cp\u003eDesigned and Manufactured by UltiMachine\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eLogic\u003c/p\u003e\u003cul style=\"padding-left: 30px; margin-top: 1.55556rem;\"\u003e\u003cli\u003e\u003cp\u003eArchim2 is supported in mainline Marlin Firmware as BOARD_ARCHIM\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eCrystals for both usb and mcu (timing accurate to 10ppm)\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003e4 Thermistor jacks\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eAll extra pins broken out on both processors (allows using the 32u2 for LUFA AVR programmer, etc.)\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003e2 channel SDRAMPS compatible SPI breakout\u003c/p\u003e\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eStepper Drivers\u003c/p\u003e\u003cul style=\"padding-left: 30px; margin-top: 1.55556rem;\"\u003e\u003cli\u003e\u003cp\u003e5 TMC2130 1/8th microsteps motor drivers with 1,1/2,1/4,1/16 as options (2 connectors for Z-axis)\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eSPI (Serial Peripheral Interface) communicated motor current control (no tiny knobs to tweak)\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eCurrent limit on driver IC VCC to prevent permanent latchup\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eMicrostep mode configured by MCU through firmware (no jumpers needed)\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eTest points for driver control signals\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eStep and Direction pins are on their own ports for synchronous movement capability\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eExtra driver ports broken out for up to 3 additional drivers (some of the motor extension pins are shared with max endstop and a pin allocated for SPI-SS extensions)\u003c/p\u003e\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003ePWM DC outputs (Extruders, Fans, Etc.)\u003c/p\u003e\u003cul style=\"padding-left: 30px; margin-top: 1.55556rem;\"\u003e\u003cli\u003e\u003cp\u003e6 outputs\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eLow resistance mosfets for cool running\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eIndicator led for each channel\u003c/p\u003e\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003ePower\u003c/p\u003e\u003cul style=\"padding-left: 30px; margin-top: 1.55556rem;\"\u003e\u003cli\u003e\u003cp\u003eThree ATC fuse protected power rails\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eHeated Bed, 15A 12-35V\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eExtruders + fans and logic, 5A 12-35V (fuse can be exchanged for up to 10A capacity)\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eMotors, 5A 12-28V (fuse can be exchanged for up to 10A capacity)\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eSMPS supports hostless printing on power supply voltages from 10-24V DC\u003c/p\u003e\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003ePCB\u003c/p\u003e\u003cul style=\"padding-left: 30px; margin-top: 1.55556rem;\"\u003e\u003cli\u003e\u003cp\u003e4 layer\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003e2oz copper on all layers\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eHigh quality, High temperature FR4-TG130 PCB\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eGold ENIG finishing\u003c/p\u003e\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eFuses\u003c/p\u003e\u003cul style=\"padding-left: 30px; margin-top: 1.55556rem;\"\u003e\u003cli\u003e\u003cp\u003e3 user replaceable automotive fuses;\u003c/p\u003e\u003cul style=\"padding-left: 30px; margin-top: 1.55556rem;\"\u003e\u003cli\u003e\u003cp\u003eF2: automotive-type 5A ATO bladed fuse for motors and on-board power supply\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eF3: automotive-type 5A ATO bladed fuse for extruder heater + fan outputs and logic\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eF4: automotive-type 15A ATO bladed fuse for the heated bed\u003c/p\u003e\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003c/ul\u003e","description_resources_documentation":"\u003cp\u003eMore Information:\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px;\"\u003eSource\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px;\"\u003eBill of Materials\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003e\u003ca href=\"https://reprap.org/wiki/Archim2\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px;\"\u003eRepRap wiki page\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003e\u003ca href=\"https://github.com/ultimachine/Archim/tree/2.2b\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px;\"\u003eGithub repository\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003e\u003ca href=\"https://ohai.lulzbot.com/project/control-box-assembly/quiver/\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px;\"\u003eInstallation Instructions\u003c/a\u003e\u003c/p\u003e","description_features":"\u003cp\u003eSince Archim2.2 is built on the shoulders of the Arduino community, makers and hackers should consider using this motherboard for additional projects beyond controlling a 3D printer.\u003cbr\u003e\u003cbr\u003eCurious where the product's name comes from?  Archim is named after the mathematician Archimedes.\u003cbr\u003e\u003c/p\u003e","featured":false,"variant_selector":[],"stock":{"global":{"state":"in_stock"}},"brand":null,"images":[{"small":{"src":"https://assets.lulzbot.com/archim-2-2b-pcba-retail-kit_60_60-6964.jpg","alt":"Archim 2.2b PCBA Retail Kit","tag":""},"medium":{"src":"https://assets.lulzbot.com/archim-2-2b-pcba-retail-kit_300_300-6965.jpg","alt":"Archim 2.2b PCBA Retail Kit","tag":""},"large":{"src":"https://assets.lulzbot.com/archim-2-2b-pcba-retail-kit_500_500-6966.jpg","alt":"Archim 2.2b PCBA Retail Kit","tag":""}},{"small":{"src":"https://assets.lulzbot.com/archim-2-2b-pcba-retail-kit_60_60-9937.jpg","alt":"Archim 2.2b PCBA Retail Kit","tag":""},"medium":{"src":"https://assets.lulzbot.com/archim-2-2b-pcba-retail-kit_300_300-9938.jpg","alt":"Archim 2.2b PCBA Retail Kit","tag":""},"large":{"src":"https://assets.lulzbot.com/archim-2-2b-pcba-retail-kit_500_500-9939.jpg","alt":"Archim 2.2b PCBA Retail Kit","tag":""}}],"slides_group":[],"variant_attributes_group":{},"id":1376,"pack_ok":false,"used_in_pack":[],"index_name":"products"}
Overview


Archim 2.2b PCBA Retail Kit

Archim 2.2b PCBA Retail Kit


$ 350 00
350.0

{"objectID":2764,"model":{"name":"Archim 2.2b PCBA Retail Kit"},"url_key":"store/archim-2-2b-pcba-retail-kit-kt-cp0155","redirect_url_key":["archim-2-2b-pcba-retail-kit-kt-cp0155"],"main":true,"short_description":"\u003cp\u003eThis all-in-one TAZ Pro 3D printer motherboard is made by UltiMachine using a 32bit Atmel SAM3X8E processor and comes equipped with Trinamic TMC2130 stepper drivers all on one integrated PCB, built in fuses, and more.\u003c/p\u003e\u003cp\u003e\u003cbr\u003e\u003c/p\u003e\u003cp\u003e\u003ci\u003e\u003cfont style=\"color: rgb(206, 0, 0);\"\u003eDoes not come with pre-installed firmware\u003c/font\u003e\u003c/i\u003e\u003c/p\u003e","description":"\u003cp\u003e\u003cbr\u003e\u003c/p\u003e","name":"Archim 2.2b PCBA Retail Kit","short_name":"","seo_title":"Archim 2.2b PCBA Retail Kit | LulzBot 3D Printer","meta_keywords":null,"meta_description":"Made by UltiMachine this TAZ Pro 3D printer motherboard is equipped with a 32bit Atmel SAM3X8E processor and Trinamic TMC2130 stepper driver.","variant_count":1,"categories":[{"id":4,"name":"Parts","url_key":"store/parts","level":0},{"id":40,"name":"Electronics, Boards, \u0026 Power Supplies","url_key":"store/parts/electronics-boards-power-supplies","level":1}],"sku":"KT-CP0155","variant_attributes":{},"price":{"value":350.0,"tax_included":false,"original_value":350.0,"discount":0.0},"hierarchicalCategories":[{"level":1,"value":"Parts","ancestors":["All"],"order":18},{"level":2,"value":"Electronics, Boards, \u0026 Power Supplies","ancestors":["Parts","All"],"order":23}],"filament_material":[],"compatibility":[{"name":"LulzBot 3D Printer, TAZ Pro S, Boxed for Retail, NA"},{"name":"LulzBot 3D Printer, TAZ Pro, Boxed for Retail, NA"}],"description_parts_specification":"\u003ch4 style=\"line-height: 1.25em; padding-bottom: 0.5rem; margin-bottom: 0px; border-bottom: 1px solid rgb(224, 224, 224);\"\u003eParts Included\u003c/h4\u003e\u003cp\u003e• One (1) Archim2.2 electronics board\u003c/p\u003e\u003ch4 style=\"line-height: 1.25em; padding-bottom: 0.5rem; margin-bottom: 0px; border-bottom: 1px solid rgb(224, 224, 224); margin-top: 2.66667rem;\"\u003eSpecifications\u003c/h4\u003e\u003cul style=\"margin-bottom: 0px; padding-left: 30px;\"\u003e\u003cli\u003e\u003cp\u003eDesigned and Manufactured by UltiMachine\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eLogic\u003c/p\u003e\u003cul style=\"padding-left: 30px; margin-top: 1.55556rem;\"\u003e\u003cli\u003e\u003cp\u003eArchim2 is supported in mainline Marlin Firmware as BOARD_ARCHIM\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eCrystals for both usb and mcu (timing accurate to 10ppm)\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003e4 Thermistor jacks\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eAll extra pins broken out on both processors (allows using the 32u2 for LUFA AVR programmer, etc.)\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003e2 channel SDRAMPS compatible SPI breakout\u003c/p\u003e\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eStepper Drivers\u003c/p\u003e\u003cul style=\"padding-left: 30px; margin-top: 1.55556rem;\"\u003e\u003cli\u003e\u003cp\u003e5 TMC2130 1/8th microsteps motor drivers with 1,1/2,1/4,1/16 as options (2 connectors for Z-axis)\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eSPI (Serial Peripheral Interface) communicated motor current control (no tiny knobs to tweak)\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eCurrent limit on driver IC VCC to prevent permanent latchup\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eMicrostep mode configured by MCU through firmware (no jumpers needed)\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eTest points for driver control signals\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eStep and Direction pins are on their own ports for synchronous movement capability\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eExtra driver ports broken out for up to 3 additional drivers (some of the motor extension pins are shared with max endstop and a pin allocated for SPI-SS extensions)\u003c/p\u003e\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003ePWM DC outputs (Extruders, Fans, Etc.)\u003c/p\u003e\u003cul style=\"padding-left: 30px; margin-top: 1.55556rem;\"\u003e\u003cli\u003e\u003cp\u003e6 outputs\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eLow resistance mosfets for cool running\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eIndicator led for each channel\u003c/p\u003e\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003ePower\u003c/p\u003e\u003cul style=\"padding-left: 30px; margin-top: 1.55556rem;\"\u003e\u003cli\u003e\u003cp\u003eThree ATC fuse protected power rails\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eHeated Bed, 15A 12-35V\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eExtruders + fans and logic, 5A 12-35V (fuse can be exchanged for up to 10A capacity)\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eMotors, 5A 12-28V (fuse can be exchanged for up to 10A capacity)\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eSMPS supports hostless printing on power supply voltages from 10-24V DC\u003c/p\u003e\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003ePCB\u003c/p\u003e\u003cul style=\"padding-left: 30px; margin-top: 1.55556rem;\"\u003e\u003cli\u003e\u003cp\u003e4 layer\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003e2oz copper on all layers\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eHigh quality, High temperature FR4-TG130 PCB\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eGold ENIG finishing\u003c/p\u003e\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eFuses\u003c/p\u003e\u003cul style=\"padding-left: 30px; margin-top: 1.55556rem;\"\u003e\u003cli\u003e\u003cp\u003e3 user replaceable automotive fuses;\u003c/p\u003e\u003cul style=\"padding-left: 30px; margin-top: 1.55556rem;\"\u003e\u003cli\u003e\u003cp\u003eF2: automotive-type 5A ATO bladed fuse for motors and on-board power supply\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eF3: automotive-type 5A ATO bladed fuse for extruder heater + fan outputs and logic\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eF4: automotive-type 15A ATO bladed fuse for the heated bed\u003c/p\u003e\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003c/ul\u003e","description_resources_documentation":"\u003cp\u003eMore Information:\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px;\"\u003eSource\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px;\"\u003eBill of Materials\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003e\u003ca href=\"https://reprap.org/wiki/Archim2\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px;\"\u003eRepRap wiki page\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003e\u003ca href=\"https://github.com/ultimachine/Archim/tree/2.2b\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px;\"\u003eGithub repository\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003e\u003ca href=\"https://ohai.lulzbot.com/project/control-box-assembly/quiver/\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px;\"\u003eInstallation Instructions\u003c/a\u003e\u003c/p\u003e","description_features":"\u003cp\u003eSince Archim2.2 is built on the shoulders of the Arduino community, makers and hackers should consider using this motherboard for additional projects beyond controlling a 3D printer.\u003cbr\u003e\u003cbr\u003eCurious where the product's name comes from?  Archim is named after the mathematician Archimedes.\u003cbr\u003e\u003c/p\u003e","featured":false,"variant_selector":[],"stock":{"global":{"state":"in_stock"}},"brand":null,"images":[{"small":{"src":"https://assets.lulzbot.com/archim-2-2b-pcba-retail-kit_60_60-6964.jpg","alt":"Archim 2.2b PCBA Retail Kit","tag":""},"medium":{"src":"https://assets.lulzbot.com/archim-2-2b-pcba-retail-kit_300_300-6965.jpg","alt":"Archim 2.2b PCBA Retail Kit","tag":""},"large":{"src":"https://assets.lulzbot.com/archim-2-2b-pcba-retail-kit_500_500-6966.jpg","alt":"Archim 2.2b PCBA Retail Kit","tag":""}},{"small":{"src":"https://assets.lulzbot.com/archim-2-2b-pcba-retail-kit_60_60-9937.jpg","alt":"Archim 2.2b PCBA Retail Kit","tag":""},"medium":{"src":"https://assets.lulzbot.com/archim-2-2b-pcba-retail-kit_300_300-9938.jpg","alt":"Archim 2.2b PCBA Retail Kit","tag":""},"large":{"src":"https://assets.lulzbot.com/archim-2-2b-pcba-retail-kit_500_500-9939.jpg","alt":"Archim 2.2b PCBA Retail Kit","tag":""}}],"slides_group":[],"variant_attributes_group":{},"id":1376,"pack_ok":false,"used_in_pack":[],"index_name":"products"}
{"objectID":2764,"model":{"name":"Archim 2.2b PCBA Retail Kit"},"url_key":"store/archim-2-2b-pcba-retail-kit-kt-cp0155","redirect_url_key":["archim-2-2b-pcba-retail-kit-kt-cp0155"],"main":true,"short_description":"\u003cp\u003eThis all-in-one TAZ Pro 3D printer motherboard is made by UltiMachine using a 32bit Atmel SAM3X8E processor and comes equipped with Trinamic TMC2130 stepper drivers all on one integrated PCB, built in fuses, and more.\u003c/p\u003e\u003cp\u003e\u003cbr\u003e\u003c/p\u003e\u003cp\u003e\u003ci\u003e\u003cfont style=\"color: rgb(206, 0, 0);\"\u003eDoes not come with pre-installed firmware\u003c/font\u003e\u003c/i\u003e\u003c/p\u003e","description":"\u003cp\u003e\u003cbr\u003e\u003c/p\u003e","name":"Archim 2.2b PCBA Retail Kit","short_name":"","seo_title":"Archim 2.2b PCBA Retail Kit | LulzBot 3D Printer","meta_keywords":null,"meta_description":"Made by UltiMachine this TAZ Pro 3D printer motherboard is equipped with a 32bit Atmel SAM3X8E processor and Trinamic TMC2130 stepper driver.","variant_count":1,"categories":[{"id":4,"name":"Parts","url_key":"store/parts","level":0},{"id":40,"name":"Electronics, Boards, \u0026 Power Supplies","url_key":"store/parts/electronics-boards-power-supplies","level":1}],"sku":"KT-CP0155","variant_attributes":{},"price":{"value":350.0,"tax_included":false,"original_value":350.0,"discount":0.0},"hierarchicalCategories":[{"level":1,"value":"Parts","ancestors":["All"],"order":18},{"level":2,"value":"Electronics, Boards, \u0026 Power Supplies","ancestors":["Parts","All"],"order":23}],"filament_material":[],"compatibility":[{"name":"LulzBot 3D Printer, TAZ Pro S, Boxed for Retail, NA"},{"name":"LulzBot 3D Printer, TAZ Pro, Boxed for Retail, NA"}],"description_parts_specification":"\u003ch4 style=\"line-height: 1.25em; padding-bottom: 0.5rem; margin-bottom: 0px; border-bottom: 1px solid rgb(224, 224, 224);\"\u003eParts Included\u003c/h4\u003e\u003cp\u003e• One (1) Archim2.2 electronics board\u003c/p\u003e\u003ch4 style=\"line-height: 1.25em; padding-bottom: 0.5rem; margin-bottom: 0px; border-bottom: 1px solid rgb(224, 224, 224); margin-top: 2.66667rem;\"\u003eSpecifications\u003c/h4\u003e\u003cul style=\"margin-bottom: 0px; padding-left: 30px;\"\u003e\u003cli\u003e\u003cp\u003eDesigned and Manufactured by UltiMachine\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eLogic\u003c/p\u003e\u003cul style=\"padding-left: 30px; margin-top: 1.55556rem;\"\u003e\u003cli\u003e\u003cp\u003eArchim2 is supported in mainline Marlin Firmware as BOARD_ARCHIM\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eCrystals for both usb and mcu (timing accurate to 10ppm)\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003e4 Thermistor jacks\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eAll extra pins broken out on both processors (allows using the 32u2 for LUFA AVR programmer, etc.)\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003e2 channel SDRAMPS compatible SPI breakout\u003c/p\u003e\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eStepper Drivers\u003c/p\u003e\u003cul style=\"padding-left: 30px; margin-top: 1.55556rem;\"\u003e\u003cli\u003e\u003cp\u003e5 TMC2130 1/8th microsteps motor drivers with 1,1/2,1/4,1/16 as options (2 connectors for Z-axis)\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eSPI (Serial Peripheral Interface) communicated motor current control (no tiny knobs to tweak)\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eCurrent limit on driver IC VCC to prevent permanent latchup\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eMicrostep mode configured by MCU through firmware (no jumpers needed)\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eTest points for driver control signals\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eStep and Direction pins are on their own ports for synchronous movement capability\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eExtra driver ports broken out for up to 3 additional drivers (some of the motor extension pins are shared with max endstop and a pin allocated for SPI-SS extensions)\u003c/p\u003e\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003ePWM DC outputs (Extruders, Fans, Etc.)\u003c/p\u003e\u003cul style=\"padding-left: 30px; margin-top: 1.55556rem;\"\u003e\u003cli\u003e\u003cp\u003e6 outputs\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eLow resistance mosfets for cool running\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eIndicator led for each channel\u003c/p\u003e\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003ePower\u003c/p\u003e\u003cul style=\"padding-left: 30px; margin-top: 1.55556rem;\"\u003e\u003cli\u003e\u003cp\u003eThree ATC fuse protected power rails\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eHeated Bed, 15A 12-35V\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eExtruders + fans and logic, 5A 12-35V (fuse can be exchanged for up to 10A capacity)\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eMotors, 5A 12-28V (fuse can be exchanged for up to 10A capacity)\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eSMPS supports hostless printing on power supply voltages from 10-24V DC\u003c/p\u003e\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003ePCB\u003c/p\u003e\u003cul style=\"padding-left: 30px; margin-top: 1.55556rem;\"\u003e\u003cli\u003e\u003cp\u003e4 layer\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003e2oz copper on all layers\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eHigh quality, High temperature FR4-TG130 PCB\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eGold ENIG finishing\u003c/p\u003e\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eFuses\u003c/p\u003e\u003cul style=\"padding-left: 30px; margin-top: 1.55556rem;\"\u003e\u003cli\u003e\u003cp\u003e3 user replaceable automotive fuses;\u003c/p\u003e\u003cul style=\"padding-left: 30px; margin-top: 1.55556rem;\"\u003e\u003cli\u003e\u003cp\u003eF2: automotive-type 5A ATO bladed fuse for motors and on-board power supply\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eF3: automotive-type 5A ATO bladed fuse for extruder heater + fan outputs and logic\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eF4: automotive-type 15A ATO bladed fuse for the heated bed\u003c/p\u003e\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003c/ul\u003e","description_resources_documentation":"\u003cp\u003eMore Information:\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px;\"\u003eSource\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px;\"\u003eBill of Materials\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003e\u003ca href=\"https://reprap.org/wiki/Archim2\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px;\"\u003eRepRap wiki page\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003e\u003ca href=\"https://github.com/ultimachine/Archim/tree/2.2b\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px;\"\u003eGithub repository\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003e\u003ca href=\"https://ohai.lulzbot.com/project/control-box-assembly/quiver/\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px;\"\u003eInstallation Instructions\u003c/a\u003e\u003c/p\u003e","description_features":"\u003cp\u003eSince Archim2.2 is built on the shoulders of the Arduino community, makers and hackers should consider using this motherboard for additional projects beyond controlling a 3D printer.\u003cbr\u003e\u003cbr\u003eCurious where the product's name comes from?  Archim is named after the mathematician Archimedes.\u003cbr\u003e\u003c/p\u003e","featured":false,"variant_selector":[],"stock":{"global":{"state":"in_stock"}},"brand":null,"images":[{"small":{"src":"https://assets.lulzbot.com/archim-2-2b-pcba-retail-kit_60_60-6964.jpg","alt":"Archim 2.2b PCBA Retail Kit","tag":""},"medium":{"src":"https://assets.lulzbot.com/archim-2-2b-pcba-retail-kit_300_300-6965.jpg","alt":"Archim 2.2b PCBA Retail Kit","tag":""},"large":{"src":"https://assets.lulzbot.com/archim-2-2b-pcba-retail-kit_500_500-6966.jpg","alt":"Archim 2.2b PCBA Retail Kit","tag":""}},{"small":{"src":"https://assets.lulzbot.com/archim-2-2b-pcba-retail-kit_60_60-9937.jpg","alt":"Archim 2.2b PCBA Retail Kit","tag":""},"medium":{"src":"https://assets.lulzbot.com/archim-2-2b-pcba-retail-kit_300_300-9938.jpg","alt":"Archim 2.2b PCBA Retail Kit","tag":""},"large":{"src":"https://assets.lulzbot.com/archim-2-2b-pcba-retail-kit_500_500-9939.jpg","alt":"Archim 2.2b PCBA Retail Kit","tag":""}}],"slides_group":[],"variant_attributes_group":{},"id":1376,"pack_ok":false,"used_in_pack":[],"index_name":"products"}
.