Loading...

Einsy Retro Board 1.0 Retail

This compact, all-in-one control board is made by UltiMachine and comes with an Arduino MEGA and Trinamic TMC2130 drivers for quiet 3D printing.  Also included are 4 PWM Mosfet outputs, PWM motor current control for easier adjustment, SMPS for tetherless printing options, LUFA USB, and more. Note, you will also need to order the Thermal Gap Filler Kit to keep your drivers cool and functioning at optimum performance levels. 


Does not come with pre-installed firmware

Read more
Compatibility:
LulzBot 3D Printer, Mini 2, Boxed for Retail, NA
LulzBot Bio Printer, FRESH™ certified Bio, Boxed for Retail, NA

Parts Included

One (1) Einsy Retro 1.0 electronics board

Specifications

  • Designed and Manufactured by Ultimachine

  • Logic

    • Arduino MEGA compatible Atmega2560 and Atmega32u2 processors are compatible with all RAMPS class firmware
    • Crystals for both usb and mcu (timing accurate to 10ppm)
    • 3 Thermistor jacks.
  • Motor Drivers

    • 4 Trinamic TMC2130 1/256th microstep motor drivers(2 connectors on Z for Prusa Mendel and other dual Z printer designs)
    • SPI Control of stepper current instead of PWM.
    • Microstep mode configured by MCU through firmware (SPI, no jumpers needed)
  • PWM DC outputs (Extruders, Fans, Etc.)

    • 4 outputs (1 Extruder, 1 BED, 2 low power (fan,etc)
    • Low resistance mosfets for cool running
    • Indicator led for each channel
    • FANS have 3pin fan connector.
    • FANS have 12-24V power source.
    • FAN connectors have tachometer feedback pin to the MCU to measure fan speed in capable firmware.
  • Power

    • 2 power input rails
      • Heated Bed, 15A 12-24V (15A dedicated fuse)
      • Primary Power 10A 12-24V: Motors, Logic & Fans (5A dedicated fuse) + Extruder (5A dedicated fuse)
    • Built in SMPS for 5V generation from the Motors, Logic & Fans rail
      • Provides 5V power to FANS
  • PCB

    • 6 layer
    • 2oz copper on all layers
    • High quality, High temperature FR4-TG130 PCB
    • Gold ENIG finishing
  • Fuses

    • F1 5A supplies the motors + logic & fans .
    • F2 5A supplies the extruder heater.
    • F3 15A supplies the heated bed output.
$ 150 00
150.0
{"objectID":2206,"model":{"name":"Einsy Retro Board 1.0 Retail"},"url_key":"store/einsy-retro-board-1-0-retail-kt-cp0137","redirect_url_key":["einsy-retro-board-1-0-retail-kt-cp0137"],"main":true,"short_description":"\u003cp\u003eThis compact, all-in-one control board is made by UltiMachine and comes with an Arduino MEGA and Trinamic TMC2130 drivers for quiet 3D printing.  Also included are 4 PWM Mosfet outputs, PWM motor current control for easier adjustment, SMPS for tetherless printing options, LUFA USB, and more. Note, you will also need to order the \u003ca href=\"https://shop.lulzbot.com/thermal-gap-filler-kit-x4-kt-ms0007?ref=KT-MS0007\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px;\"\u003eThermal Gap Filler Kit\u003c/a\u003e to keep your drivers cool and functioning at optimum performance levels. \u003c/p\u003e\u003cp\u003e\u003cbr\u003e\u003c/p\u003e\u003cp\u003e\u003cfont style=\"color: rgb(206, 0, 0);\"\u003e\u003ci\u003eDoes not come with pre-installed firmware\u003c/i\u003e\u003c/font\u003e\u003cbr\u003e\u003c/p\u003e","description":"\u003cp\u003e\u003cbr\u003e\u003c/p\u003e","name":"Einsy Retro Board 1.0 Retail","short_name":"","seo_title":"Einsy Retro Board 1.0 Retail | LulzBot 3D Printer Part","meta_keywords":null,"meta_description":"Compact, all-in-one control board is made by UltiMachine with an Arduino MEGA and Trinamic TMC2130 for quiet 3D printing.","variant_count":1,"categories":[{"id":4,"name":"Parts","url_key":"store/parts","level":0},{"id":40,"name":"Electronics, Boards, \u0026 Power Supplies","url_key":"store/parts/electronics-boards-power-supplies","level":1}],"sku":"KT-CP0137","variant_attributes":{},"price":{"value":150.0,"tax_included":false,"original_value":150.0,"discount":0.0},"hierarchicalCategories":[{"level":1,"value":"Parts","ancestors":["All"],"order":18},{"level":2,"value":"Electronics, Boards, \u0026 Power Supplies","ancestors":["Parts","All"],"order":23}],"filament_material":[],"compatibility":[{"name":"LulzBot 3D Printer, Mini 2, Boxed for Retail, NA"},{"name":"LulzBot Bio Printer, FRESH™ certified Bio, Boxed for Retail, NA"}],"description_parts_specification":"\u003ch4 style=\"line-height: 1.25em; padding-bottom: 0.5rem; margin-bottom: 0px; border-bottom: 1px solid rgb(224, 224, 224);\"\u003eParts Included\u003c/h4\u003e\u003cp\u003eOne (1) Einsy Retro 1.0 electronics board\u003c/p\u003e\u003ch4 style=\"line-height: 1.25em; padding-bottom: 0.5rem; margin-bottom: 0px; border-bottom: 1px solid rgb(224, 224, 224); margin-top: 2.66667rem;\"\u003eSpecifications\u003c/h4\u003e\u003cul style=\"margin-bottom: 0px; padding-left: 30px;\"\u003e\u003cli\u003e\u003cp\u003eDesigned and Manufactured by Ultimachine\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eLogic\u003c/p\u003e\u003cul style=\"padding-left: 30px; margin-top: 1.55556rem;\"\u003e\u003cli\u003eArduino MEGA compatible Atmega2560 and Atmega32u2 processors are compatible with all \u003ca href=\"https://reprap.org/wiki/List_of_Firmware\" target=\"_blank\" title=\"List of Firmware\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px;\"\u003eRAMPS class firmware\u003c/a\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003eCrystals for both usb and mcu (timing accurate to 10ppm)\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e3 Thermistor jacks.\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eMotor Drivers\u003c/p\u003e\u003cul style=\"padding-left: 30px; margin-top: 1.55556rem;\"\u003e\u003cli\u003e4 Trinamic TMC2130 1/256th \u003ca href=\"https://reprap.org/wiki/Stepper_motor_driver\" target=\"_blank\" title=\"Stepper motor driver\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px;\"\u003emicrostep motor drivers\u003c/a\u003e(2 connectors on Z for Prusa Mendel and other dual Z printer designs)\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003eSPI Control of stepper current instead of PWM.\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003eMicrostep mode configured by MCU through firmware (SPI, no jumpers needed)\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003ePWM DC outputs (Extruders, Fans, Etc.)\u003c/p\u003e\u003cul style=\"padding-left: 30px; margin-top: 1.55556rem;\"\u003e\u003cli\u003e4 outputs (1 Extruder, 1 BED, 2 low power (fan,etc)\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003eLow resistance mosfets for cool running\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003eIndicator led for each channel\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003eFANS have 3pin fan connector.\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003eFANS have 12-24V power source.\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003eFAN connectors have tachometer feedback pin to the MCU to measure fan speed in capable firmware.\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003ePower\u003c/p\u003e\u003cul style=\"padding-left: 30px; margin-top: 1.55556rem;\"\u003e\u003cli\u003e2 power input rails\u003cul style=\"padding-left: 30px;\"\u003e\u003cli\u003eHeated Bed, 15A 12-24V (15A dedicated fuse)\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003ePrimary Power 10A 12-24V: Motors, Logic \u0026amp; Fans (5A dedicated fuse) + Extruder (5A dedicated fuse)\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003eBuilt in SMPS for 5V generation from the Motors, Logic \u0026amp; Fans rail\u003cul style=\"padding-left: 30px;\"\u003e\u003cli\u003eProvides 5V power to FANS\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003ePCB\u003c/p\u003e\u003cul style=\"padding-left: 30px; margin-top: 1.55556rem;\"\u003e\u003cli\u003e6 layer\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e2oz copper on all layers\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003eHigh quality, High temperature FR4-TG130 PCB\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003eGold ENIG finishing\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eFuses\u003c/p\u003e\u003cul style=\"padding-left: 30px; margin-top: 1.55556rem;\"\u003e\u003cli\u003eF1 5A supplies the motors + logic \u0026amp; fans .\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003eF2 5A supplies the extruder heater.\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003eF3 15A supplies the heated bed output.\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003c/ul\u003e","description_resources_documentation":"\u003cp\u003eMore Information:\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/Einsy_Retro_Board_1.0_Retail_KT-CP0137/\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px;\"\u003eSource\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/Einsy_Retro_Board_1.0_Retail_KT-CP0137/Einsy_Retro_1.0_retail_BoM.ods\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px;\"\u003eBill of Materials\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/Einsy_Retro_Board_1.0_Retail_KT-CP0137/Schematic Prints_EinsyRetro_1.0.PDF\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px;\"\u003eWiring Schematic\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003e\u003ca href=\"https://reprap.org/wiki/EinsyRetro\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px;\"\u003eRepRap wiki page\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003e\u003ca href=\"https://github.com/ultimachine/EinsyRetro\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px;\"\u003eGithub repository\u003c/a\u003e\u003c/p\u003e","description_features":"\u003cp\u003e\u003cbr\u003e\u003c/p\u003e","featured":false,"variant_selector":[],"stock":{"global":{"state":"in_stock"}},"brand":null,"images":[{"small":{"src":"https://assets.lulzbot.com/einsy-retro-board-1-0-retail_60_60-6955.jpg","alt":"Einsy Retro Board 1.0 Retail","tag":""},"medium":{"src":"https://assets.lulzbot.com/einsy-retro-board-1-0-retail_300_300-6956.jpg","alt":"Einsy Retro Board 1.0 Retail","tag":""},"large":{"src":"https://assets.lulzbot.com/einsy-retro-board-1-0-retail_500_500-6957.jpg","alt":"Einsy Retro Board 1.0 Retail","tag":""}},{"small":{"src":"https://assets.lulzbot.com/einsy-retro-board-1-0-retail_60_60-10607.jpg","alt":"Einsy Retro Board 1.0 Retail","tag":""},"medium":{"src":"https://assets.lulzbot.com/einsy-retro-board-1-0-retail_300_300-10608.jpg","alt":"Einsy Retro Board 1.0 Retail","tag":""},"large":{"src":"https://assets.lulzbot.com/einsy-retro-board-1-0-retail_500_500-10609.jpg","alt":"Einsy Retro Board 1.0 Retail","tag":""}},{"small":{"src":"https://assets.lulzbot.com/einsy-retro-board-1-0-retail_60_60-10610.jpg","alt":"Einsy Retro Board 1.0 Retail","tag":""},"medium":{"src":"https://assets.lulzbot.com/einsy-retro-board-1-0-retail_300_300-10611.jpg","alt":"Einsy Retro Board 1.0 Retail","tag":""},"large":{"src":"https://assets.lulzbot.com/einsy-retro-board-1-0-retail_500_500-10612.jpg","alt":"Einsy Retro Board 1.0 Retail","tag":""}}],"slides_group":[],"variant_attributes_group":{},"id":1375,"pack_ok":false,"used_in_pack":[],"index_name":"products"}
Overview


Einsy Retro Board 1.0 Retail

Einsy Retro Board 1.0 Retail


$ 150 00
150.0

{"objectID":2206,"model":{"name":"Einsy Retro Board 1.0 Retail"},"url_key":"store/einsy-retro-board-1-0-retail-kt-cp0137","redirect_url_key":["einsy-retro-board-1-0-retail-kt-cp0137"],"main":true,"short_description":"\u003cp\u003eThis compact, all-in-one control board is made by UltiMachine and comes with an Arduino MEGA and Trinamic TMC2130 drivers for quiet 3D printing.  Also included are 4 PWM Mosfet outputs, PWM motor current control for easier adjustment, SMPS for tetherless printing options, LUFA USB, and more. Note, you will also need to order the \u003ca href=\"https://shop.lulzbot.com/thermal-gap-filler-kit-x4-kt-ms0007?ref=KT-MS0007\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px;\"\u003eThermal Gap Filler Kit\u003c/a\u003e to keep your drivers cool and functioning at optimum performance levels. \u003c/p\u003e\u003cp\u003e\u003cbr\u003e\u003c/p\u003e\u003cp\u003e\u003cfont style=\"color: rgb(206, 0, 0);\"\u003e\u003ci\u003eDoes not come with pre-installed firmware\u003c/i\u003e\u003c/font\u003e\u003cbr\u003e\u003c/p\u003e","description":"\u003cp\u003e\u003cbr\u003e\u003c/p\u003e","name":"Einsy Retro Board 1.0 Retail","short_name":"","seo_title":"Einsy Retro Board 1.0 Retail | LulzBot 3D Printer Part","meta_keywords":null,"meta_description":"Compact, all-in-one control board is made by UltiMachine with an Arduino MEGA and Trinamic TMC2130 for quiet 3D printing.","variant_count":1,"categories":[{"id":4,"name":"Parts","url_key":"store/parts","level":0},{"id":40,"name":"Electronics, Boards, \u0026 Power Supplies","url_key":"store/parts/electronics-boards-power-supplies","level":1}],"sku":"KT-CP0137","variant_attributes":{},"price":{"value":150.0,"tax_included":false,"original_value":150.0,"discount":0.0},"hierarchicalCategories":[{"level":1,"value":"Parts","ancestors":["All"],"order":18},{"level":2,"value":"Electronics, Boards, \u0026 Power Supplies","ancestors":["Parts","All"],"order":23}],"filament_material":[],"compatibility":[{"name":"LulzBot 3D Printer, Mini 2, Boxed for Retail, NA"},{"name":"LulzBot Bio Printer, FRESH™ certified Bio, Boxed for Retail, NA"}],"description_parts_specification":"\u003ch4 style=\"line-height: 1.25em; padding-bottom: 0.5rem; margin-bottom: 0px; border-bottom: 1px solid rgb(224, 224, 224);\"\u003eParts Included\u003c/h4\u003e\u003cp\u003eOne (1) Einsy Retro 1.0 electronics board\u003c/p\u003e\u003ch4 style=\"line-height: 1.25em; padding-bottom: 0.5rem; margin-bottom: 0px; border-bottom: 1px solid rgb(224, 224, 224); margin-top: 2.66667rem;\"\u003eSpecifications\u003c/h4\u003e\u003cul style=\"margin-bottom: 0px; padding-left: 30px;\"\u003e\u003cli\u003e\u003cp\u003eDesigned and Manufactured by Ultimachine\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eLogic\u003c/p\u003e\u003cul style=\"padding-left: 30px; margin-top: 1.55556rem;\"\u003e\u003cli\u003eArduino MEGA compatible Atmega2560 and Atmega32u2 processors are compatible with all \u003ca href=\"https://reprap.org/wiki/List_of_Firmware\" target=\"_blank\" title=\"List of Firmware\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px;\"\u003eRAMPS class firmware\u003c/a\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003eCrystals for both usb and mcu (timing accurate to 10ppm)\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e3 Thermistor jacks.\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eMotor Drivers\u003c/p\u003e\u003cul style=\"padding-left: 30px; margin-top: 1.55556rem;\"\u003e\u003cli\u003e4 Trinamic TMC2130 1/256th \u003ca href=\"https://reprap.org/wiki/Stepper_motor_driver\" target=\"_blank\" title=\"Stepper motor driver\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px;\"\u003emicrostep motor drivers\u003c/a\u003e(2 connectors on Z for Prusa Mendel and other dual Z printer designs)\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003eSPI Control of stepper current instead of PWM.\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003eMicrostep mode configured by MCU through firmware (SPI, no jumpers needed)\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003ePWM DC outputs (Extruders, Fans, Etc.)\u003c/p\u003e\u003cul style=\"padding-left: 30px; margin-top: 1.55556rem;\"\u003e\u003cli\u003e4 outputs (1 Extruder, 1 BED, 2 low power (fan,etc)\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003eLow resistance mosfets for cool running\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003eIndicator led for each channel\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003eFANS have 3pin fan connector.\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003eFANS have 12-24V power source.\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003eFAN connectors have tachometer feedback pin to the MCU to measure fan speed in capable firmware.\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003ePower\u003c/p\u003e\u003cul style=\"padding-left: 30px; margin-top: 1.55556rem;\"\u003e\u003cli\u003e2 power input rails\u003cul style=\"padding-left: 30px;\"\u003e\u003cli\u003eHeated Bed, 15A 12-24V (15A dedicated fuse)\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003ePrimary Power 10A 12-24V: Motors, Logic \u0026amp; Fans (5A dedicated fuse) + Extruder (5A dedicated fuse)\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003eBuilt in SMPS for 5V generation from the Motors, Logic \u0026amp; Fans rail\u003cul style=\"padding-left: 30px;\"\u003e\u003cli\u003eProvides 5V power to FANS\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003ePCB\u003c/p\u003e\u003cul style=\"padding-left: 30px; margin-top: 1.55556rem;\"\u003e\u003cli\u003e6 layer\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e2oz copper on all layers\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003eHigh quality, High temperature FR4-TG130 PCB\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003eGold ENIG finishing\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eFuses\u003c/p\u003e\u003cul style=\"padding-left: 30px; margin-top: 1.55556rem;\"\u003e\u003cli\u003eF1 5A supplies the motors + logic \u0026amp; fans .\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003eF2 5A supplies the extruder heater.\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003eF3 15A supplies the heated bed output.\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003c/ul\u003e","description_resources_documentation":"\u003cp\u003eMore Information:\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/Einsy_Retro_Board_1.0_Retail_KT-CP0137/\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px;\"\u003eSource\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/Einsy_Retro_Board_1.0_Retail_KT-CP0137/Einsy_Retro_1.0_retail_BoM.ods\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px;\"\u003eBill of Materials\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/Einsy_Retro_Board_1.0_Retail_KT-CP0137/Schematic Prints_EinsyRetro_1.0.PDF\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px;\"\u003eWiring Schematic\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003e\u003ca href=\"https://reprap.org/wiki/EinsyRetro\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px;\"\u003eRepRap wiki page\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003e\u003ca href=\"https://github.com/ultimachine/EinsyRetro\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px;\"\u003eGithub repository\u003c/a\u003e\u003c/p\u003e","description_features":"\u003cp\u003e\u003cbr\u003e\u003c/p\u003e","featured":false,"variant_selector":[],"stock":{"global":{"state":"in_stock"}},"brand":null,"images":[{"small":{"src":"https://assets.lulzbot.com/einsy-retro-board-1-0-retail_60_60-6955.jpg","alt":"Einsy Retro Board 1.0 Retail","tag":""},"medium":{"src":"https://assets.lulzbot.com/einsy-retro-board-1-0-retail_300_300-6956.jpg","alt":"Einsy Retro Board 1.0 Retail","tag":""},"large":{"src":"https://assets.lulzbot.com/einsy-retro-board-1-0-retail_500_500-6957.jpg","alt":"Einsy Retro Board 1.0 Retail","tag":""}},{"small":{"src":"https://assets.lulzbot.com/einsy-retro-board-1-0-retail_60_60-10607.jpg","alt":"Einsy Retro Board 1.0 Retail","tag":""},"medium":{"src":"https://assets.lulzbot.com/einsy-retro-board-1-0-retail_300_300-10608.jpg","alt":"Einsy Retro Board 1.0 Retail","tag":""},"large":{"src":"https://assets.lulzbot.com/einsy-retro-board-1-0-retail_500_500-10609.jpg","alt":"Einsy Retro Board 1.0 Retail","tag":""}},{"small":{"src":"https://assets.lulzbot.com/einsy-retro-board-1-0-retail_60_60-10610.jpg","alt":"Einsy Retro Board 1.0 Retail","tag":""},"medium":{"src":"https://assets.lulzbot.com/einsy-retro-board-1-0-retail_300_300-10611.jpg","alt":"Einsy Retro Board 1.0 Retail","tag":""},"large":{"src":"https://assets.lulzbot.com/einsy-retro-board-1-0-retail_500_500-10612.jpg","alt":"Einsy Retro Board 1.0 Retail","tag":""}}],"slides_group":[],"variant_attributes_group":{},"id":1375,"pack_ok":false,"used_in_pack":[],"index_name":"products"}
{"objectID":2206,"model":{"name":"Einsy Retro Board 1.0 Retail"},"url_key":"store/einsy-retro-board-1-0-retail-kt-cp0137","redirect_url_key":["einsy-retro-board-1-0-retail-kt-cp0137"],"main":true,"short_description":"\u003cp\u003eThis compact, all-in-one control board is made by UltiMachine and comes with an Arduino MEGA and Trinamic TMC2130 drivers for quiet 3D printing.  Also included are 4 PWM Mosfet outputs, PWM motor current control for easier adjustment, SMPS for tetherless printing options, LUFA USB, and more. Note, you will also need to order the \u003ca href=\"https://shop.lulzbot.com/thermal-gap-filler-kit-x4-kt-ms0007?ref=KT-MS0007\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px;\"\u003eThermal Gap Filler Kit\u003c/a\u003e to keep your drivers cool and functioning at optimum performance levels. \u003c/p\u003e\u003cp\u003e\u003cbr\u003e\u003c/p\u003e\u003cp\u003e\u003cfont style=\"color: rgb(206, 0, 0);\"\u003e\u003ci\u003eDoes not come with pre-installed firmware\u003c/i\u003e\u003c/font\u003e\u003cbr\u003e\u003c/p\u003e","description":"\u003cp\u003e\u003cbr\u003e\u003c/p\u003e","name":"Einsy Retro Board 1.0 Retail","short_name":"","seo_title":"Einsy Retro Board 1.0 Retail | LulzBot 3D Printer Part","meta_keywords":null,"meta_description":"Compact, all-in-one control board is made by UltiMachine with an Arduino MEGA and Trinamic TMC2130 for quiet 3D printing.","variant_count":1,"categories":[{"id":4,"name":"Parts","url_key":"store/parts","level":0},{"id":40,"name":"Electronics, Boards, \u0026 Power Supplies","url_key":"store/parts/electronics-boards-power-supplies","level":1}],"sku":"KT-CP0137","variant_attributes":{},"price":{"value":150.0,"tax_included":false,"original_value":150.0,"discount":0.0},"hierarchicalCategories":[{"level":1,"value":"Parts","ancestors":["All"],"order":18},{"level":2,"value":"Electronics, Boards, \u0026 Power Supplies","ancestors":["Parts","All"],"order":23}],"filament_material":[],"compatibility":[{"name":"LulzBot 3D Printer, Mini 2, Boxed for Retail, NA"},{"name":"LulzBot Bio Printer, FRESH™ certified Bio, Boxed for Retail, NA"}],"description_parts_specification":"\u003ch4 style=\"line-height: 1.25em; padding-bottom: 0.5rem; margin-bottom: 0px; border-bottom: 1px solid rgb(224, 224, 224);\"\u003eParts Included\u003c/h4\u003e\u003cp\u003eOne (1) Einsy Retro 1.0 electronics board\u003c/p\u003e\u003ch4 style=\"line-height: 1.25em; padding-bottom: 0.5rem; margin-bottom: 0px; border-bottom: 1px solid rgb(224, 224, 224); margin-top: 2.66667rem;\"\u003eSpecifications\u003c/h4\u003e\u003cul style=\"margin-bottom: 0px; padding-left: 30px;\"\u003e\u003cli\u003e\u003cp\u003eDesigned and Manufactured by Ultimachine\u003c/p\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eLogic\u003c/p\u003e\u003cul style=\"padding-left: 30px; margin-top: 1.55556rem;\"\u003e\u003cli\u003eArduino MEGA compatible Atmega2560 and Atmega32u2 processors are compatible with all \u003ca href=\"https://reprap.org/wiki/List_of_Firmware\" target=\"_blank\" title=\"List of Firmware\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px;\"\u003eRAMPS class firmware\u003c/a\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003eCrystals for both usb and mcu (timing accurate to 10ppm)\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e3 Thermistor jacks.\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eMotor Drivers\u003c/p\u003e\u003cul style=\"padding-left: 30px; margin-top: 1.55556rem;\"\u003e\u003cli\u003e4 Trinamic TMC2130 1/256th \u003ca href=\"https://reprap.org/wiki/Stepper_motor_driver\" target=\"_blank\" title=\"Stepper motor driver\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px;\"\u003emicrostep motor drivers\u003c/a\u003e(2 connectors on Z for Prusa Mendel and other dual Z printer designs)\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003eSPI Control of stepper current instead of PWM.\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003eMicrostep mode configured by MCU through firmware (SPI, no jumpers needed)\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003ePWM DC outputs (Extruders, Fans, Etc.)\u003c/p\u003e\u003cul style=\"padding-left: 30px; margin-top: 1.55556rem;\"\u003e\u003cli\u003e4 outputs (1 Extruder, 1 BED, 2 low power (fan,etc)\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003eLow resistance mosfets for cool running\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003eIndicator led for each channel\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003eFANS have 3pin fan connector.\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003eFANS have 12-24V power source.\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003eFAN connectors have tachometer feedback pin to the MCU to measure fan speed in capable firmware.\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003ePower\u003c/p\u003e\u003cul style=\"padding-left: 30px; margin-top: 1.55556rem;\"\u003e\u003cli\u003e2 power input rails\u003cul style=\"padding-left: 30px;\"\u003e\u003cli\u003eHeated Bed, 15A 12-24V (15A dedicated fuse)\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003ePrimary Power 10A 12-24V: Motors, Logic \u0026amp; Fans (5A dedicated fuse) + Extruder (5A dedicated fuse)\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003eBuilt in SMPS for 5V generation from the Motors, Logic \u0026amp; Fans rail\u003cul style=\"padding-left: 30px;\"\u003e\u003cli\u003eProvides 5V power to FANS\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003ePCB\u003c/p\u003e\u003cul style=\"padding-left: 30px; margin-top: 1.55556rem;\"\u003e\u003cli\u003e6 layer\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e2oz copper on all layers\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003eHigh quality, High temperature FR4-TG130 PCB\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003eGold ENIG finishing\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003cp\u003eFuses\u003c/p\u003e\u003cul style=\"padding-left: 30px; margin-top: 1.55556rem;\"\u003e\u003cli\u003eF1 5A supplies the motors + logic \u0026amp; fans .\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003eF2 5A supplies the extruder heater.\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003eF3 15A supplies the heated bed output.\u003c/li\u003e\u003c/ul\u003e\u003c/li\u003e\u003c/ul\u003e","description_resources_documentation":"\u003cp\u003eMore Information:\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/Einsy_Retro_Board_1.0_Retail_KT-CP0137/\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px;\"\u003eSource\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/Einsy_Retro_Board_1.0_Retail_KT-CP0137/Einsy_Retro_1.0_retail_BoM.ods\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px;\"\u003eBill of Materials\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/Einsy_Retro_Board_1.0_Retail_KT-CP0137/Schematic Prints_EinsyRetro_1.0.PDF\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px;\"\u003eWiring Schematic\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003e\u003ca href=\"https://reprap.org/wiki/EinsyRetro\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px;\"\u003eRepRap wiki page\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003e\u003ca href=\"https://github.com/ultimachine/EinsyRetro\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px;\"\u003eGithub repository\u003c/a\u003e\u003c/p\u003e","description_features":"\u003cp\u003e\u003cbr\u003e\u003c/p\u003e","featured":false,"variant_selector":[],"stock":{"global":{"state":"in_stock"}},"brand":null,"images":[{"small":{"src":"https://assets.lulzbot.com/einsy-retro-board-1-0-retail_60_60-6955.jpg","alt":"Einsy Retro Board 1.0 Retail","tag":""},"medium":{"src":"https://assets.lulzbot.com/einsy-retro-board-1-0-retail_300_300-6956.jpg","alt":"Einsy Retro Board 1.0 Retail","tag":""},"large":{"src":"https://assets.lulzbot.com/einsy-retro-board-1-0-retail_500_500-6957.jpg","alt":"Einsy Retro Board 1.0 Retail","tag":""}},{"small":{"src":"https://assets.lulzbot.com/einsy-retro-board-1-0-retail_60_60-10607.jpg","alt":"Einsy Retro Board 1.0 Retail","tag":""},"medium":{"src":"https://assets.lulzbot.com/einsy-retro-board-1-0-retail_300_300-10608.jpg","alt":"Einsy Retro Board 1.0 Retail","tag":""},"large":{"src":"https://assets.lulzbot.com/einsy-retro-board-1-0-retail_500_500-10609.jpg","alt":"Einsy Retro Board 1.0 Retail","tag":""}},{"small":{"src":"https://assets.lulzbot.com/einsy-retro-board-1-0-retail_60_60-10610.jpg","alt":"Einsy Retro Board 1.0 Retail","tag":""},"medium":{"src":"https://assets.lulzbot.com/einsy-retro-board-1-0-retail_300_300-10611.jpg","alt":"Einsy Retro Board 1.0 Retail","tag":""},"large":{"src":"https://assets.lulzbot.com/einsy-retro-board-1-0-retail_500_500-10612.jpg","alt":"Einsy Retro Board 1.0 Retail","tag":""}}],"slides_group":[],"variant_attributes_group":{},"id":1375,"pack_ok":false,"used_in_pack":[],"index_name":"products"}
.