Loading...

HS+ Tool Head | 2.85 mm | Hardened Steel | 1.2 mm

Produce high-strength parts that retain their dimensional stability in harsh environments in a fraction of the time! The large 1.2 mm nozzle diameter and massive E3D Volcano Heater Block with elongated melting zone is paired with the E3D Titan Extruder to enable extrusion rates of up to approximately 205 grams/hour.

Read more

Extruder TypeSingle Extruder, Legacy
Filament Diameter2.85mm
Maximum Flow RateTest Data Unavailable
Flow TestingTest Data Unavailable
Nozzle Diameter1.2mm Hardened Steel
Nozzle Layer Height Range0.6mm (600 microns) to 0.9mm (900 microns)
Nozzle SwappingNot Supported
Swappable Layer Height RangeNot Supported
Maximum Hot End Temperature290°C (554°F) - Firmware Limited
Compatible FilamentsPLA, TPU, ABS, PETg, PVB, Nylon, PC, and others below 290°C
Filament Tension MethodAdjustable via Knob, Spring Loaded Idler
Extruder Drive TypeDirect-Drive, Gear & Idler
Extruder E-Steps420 steps/mm
Leveling System CompatibilityAutomatic 5V Circuit, Automatic BLTouch
PTFE Guide Tube Attachment3D Printed Clamp
Tool Head Weight609g (21.5oz)
Tool Head Warranty90-Days
Country of OriginUSA
 

Construction Materials

Nozzle MaterialHardened Steel
Heater Block MaterialAluminum, Volcano Configuration
Heat Break MaterialStainless Steel
Fan Shroud and Mount MaterialPolymaker ABS
Cold Block and Heat Sink MaterialAluminum
Drive Gear MaterialPlastic Drive and Hardened Steel Hobb
Extruder Motor Size48mm, 1.8° NEMA 17 Stepper
Heater Cartridge24V, 40W
Temperature Sensor100k Semitec NTC Thermistor
Part Cooling Fan24V DC Centrifugal Blower 
Heat Sink Fan5V DC Axial Fan


Compatible 3D Printers

TAZ SideKickSideKick 289, SideKick 747
Mini PlatformMini 1(with Adapter), Mini 2
TAZ WorkhorseTAZ 6(with Adapter), Workhorse, Workhorse+
TAZ Pro PlatformPro, Pro S, Pro XT
$ 395 00
395.0
{"objectID":1236,"model":{"name":"HS+ Tool Head | 2.85 mm | Hardened Steel | 1.2 mm"},"url_key":"store/lulzbot-hs-tool-head-hardened-steel-1-2-mm-kt-cp0134","redirect_url_key":["lulzbot-hs-tool-head-hardened-steel-1-2-mm-kt-cp0134"],"main":true,"short_description":"\u003cp\u003eProduce high-strength parts that retain their dimensional stability in harsh environments in a fraction of the time! The large 1.2 mm nozzle diameter and massive E3D Volcano Heater Block with elongated melting zone is paired with the E3D Titan Extruder to enable extrusion rates of up to approximately 205 grams/hour.\u003cbr\u003e\u003c/p\u003e","description":"\u003cp style=\"margin-top: 1.16667rem;\"\u003eFeaturing a hardened steel nozzle and extruder hobb, this industrial 3D printer extruder head is capable of printing high-strength composite polymers on par with PEEK's tensile strength (15,200 psi - ASTM638). These polymers are used in a wide range of high-demand applications, from structural components to the automotive industry. \u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003eParts printed with these composites have higher impact resistance, resist deformation, while retaining strength in harsh and demanding environments. Industrial materials like PA-CF Low Warp combine strength and dimensional stability (less than 2% elongation at break - ASTM638) with the ability to perform in higher operating temperatures up to approximately 120° C (248° F).\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; text-align: center;\"\u003e\u003cspan style=\"font-weight: bolder;\"\u003e\u003cfont style=\"font-size: 24px;\"\u003eFilament Tension Settings\u003c/font\u003e\u003c/span\u003e\u003c/p\u003e\u003cp\u003e\u003cimg class=\"img-fluid o_we_custom_image o_we_selected_image d-block mx-auto\" src=\"https://assets.lulzbot.com/lulzbot_aero_tension_graphic-17807.jpg?access_token=9efcd201-b168-4e33-bce8-4fb17c796359\"\u003e\u003c/p\u003e\u003cp\u003e\u003cbr\u003e\u003c/p\u003e","name":"HS+ Tool Head | 2.85 mm | Hardened Steel | 1.2 mm","short_name":"","seo_title":"HS+ Tool Head | 2.85 mm | Hardened Steel | 1.2 mm | Industrial High-Strength 3D Extruder Head","meta_keywords":null,"meta_description":"With a 1.2mm extruder nozzle, the LulzBot HS+ 3D printing head is great for high-speed industrial printing. Order this extruder head for your LulzBot 3D Printer!","variant_count":1,"categories":[{"id":11,"name":"Tool Heads","url_key":"store/tool-heads","level":0},{"id":69,"name":"Legacy Tool Heads \u0026 Adapters","url_key":"store/tool-heads/legacy-tool-heads-adapters","level":1}],"sku":"KT-CP0134","variant_attributes":{},"price":{"value":395.0,"tax_included":false,"original_value":395.0,"discount":0.0},"hierarchicalCategories":[{"level":1,"value":"Tool Heads","ancestors":["All"],"order":8},{"level":2,"value":"Legacy Tool Heads \u0026 Adapters","ancestors":["Tool Heads","All"],"order":10}],"filament_material":[],"compatibility":[],"description_parts_specification":"\u003cp\u003e\u003c/p\u003e\u003cdiv class=\"field--item field--field_printer_parts_specs1\" style=\"padding-bottom: rem; width: 700px; margin-right: auto; margin-left: auto;\"\u003e\u003ctable class=\"table table-bordered\" style=\"text-align: right;\"\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003e\u003cb\u003eExtruder Type\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eSingle Extruder, \u003ca href=\"https://lulzbot.com/store/tool-heads/legacy-tool-heads-adapters\" target=\"_blank\"\u003eLegacy\u003c/a\u003e\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eFilament Diameter\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e2.85mm\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eMaximum Flow Rate\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eTest Data Unavailable\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eFlow Testing\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eTest Data Unavailable\u003cbr\u003e\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eNozzle Diameter\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e1.2mm Hardened Steel\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eNozzle Layer Height Range\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e0.6mm (600 microns) to 0.9mm (900 microns)\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eNozzle Swapping\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eNot Supported\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eSwappable Layer Height Range\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eNot Supported\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eMaximum Hot End Temperature\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e290°C (554°F) - Firmware Limited\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eCompatible Filaments\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e\u003ca href=\"https://lulzbot.com/store/filaments\" target=\"_blank\"\u003ePLA, TPU, ABS, PETg, PVB, Nylon, PC, and others below 290°C\u003c/a\u003e\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eFilament Tension Method\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eAdjustable via Knob, Spring Loaded Idler\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eExtruder Drive Type\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eDirect-Drive, Gear \u0026amp; Idler\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eExtruder E-Steps\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e420 steps/mm\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eLeveling System Compatibility\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eAutomatic 5V Circuit, Automatic BLTouch\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003ePTFE Guide Tube Attachment\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e3D Printed Clamp\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eTool Head Weight\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e609g (21.5oz)\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eTool Head Warranty\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e90-Days\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eCountry of Origin\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eUSA\u003cbr\u003e\u003c/td\u003e\u003c/tr\u003e\u003c/tbody\u003e\u003c/table\u003e\u003c/div\u003e\u003cdiv class=\"field--item field--field_printer_parts_specs1\" style=\"padding-bottom: rem; width: 700px; margin-right: auto; margin-left: auto;\"\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: inherit; font-style: inherit; font-variant-caps: inherit; font-variant-ligatures: inherit; text-align: inherit;\"\u003e \u003cdiv class=\"field--item field--field_printer_parts_specs1\" style=\"padding-bottom: rem; width: 700px; margin-right: auto; margin-left: auto;\"\u003e\u003c/div\u003e\u003c/span\u003e\u003c/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: inherit; font-style: inherit; font-variant-caps: inherit; font-variant-ligatures: inherit; text-align: inherit;\"\u003e\u003ch4\u003eConstruction Materials\u003c/h4\u003e\u003c/span\u003e\u003c/div\u003e\u003ctable class=\"table table-bordered\" style=\"text-align: right;\"\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003e\u003cb\u003eNozzle Material\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eHardened Steel\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eHeater Block Material\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eAluminum, Volcano Configuration\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eHeat Break Material\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eStainless Steel\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eFan Shroud and Mount Material\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e\u003ca href=\"https://lulzbot.com/store/polymaker-polylite-abs-filament?ref=RM-AB0160\" target=\"_blank\"\u003ePolymaker ABS\u003c/a\u003e\u003cbr\u003e\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eCold Block and Heat Sink Material\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eAluminum\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eDrive Gear Material\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003ePlastic Drive and Hardened Steel Hobb\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eExtruder Motor Size\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e48mm, 1.8° NEMA 17 Stepper\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eHeater Cartridge\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e24V, 40W\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eTemperature Sensor\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e\u003ca href=\"https://lulzbot.com/store/100k-semitec-ntc-thermistor-kt-cp0110?ref=KT-CP0110\" target=\"_blank\"\u003e100k Semitec NTC Thermistor\u003c/a\u003e\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003ePart Cooling Fan\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e24V DC Centrifugal Blower \u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eHeat Sink Fan\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e5V DC Axial Fan\u003c/td\u003e\u003c/tr\u003e\u003c/tbody\u003e\u003c/table\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: inherit; font-style: inherit; font-variant-caps: inherit; font-variant-ligatures: inherit; text-align: inherit;\"\u003e\u003cp\u003e\u003cbr\u003e\u003c/p\u003e\u003ch4\u003eCompatible 3D Printers\u003c/h4\u003e\u003ctable class=\"table table-bordered\" style=\"font-size: 13px; font-style: inherit; font-variant-ligatures: inherit; font-variant-caps: inherit; text-align: right;\"\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003e\u003cb\u003eTAZ SideKick\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eSideKick 289, SideKick 747\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd\u003e\u003cb\u003eMini Platform\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eMini 1(\u003ca href=\"https://lulzbot.com/store/lulzbot-mini-1-universal-tool-head-adapter-kt-cp0141?ref=KT-CP0141\" target=\"_blank\"\u003ewith Adapter\u003c/a\u003e), Mini 2\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd\u003e\u003cb\u003eTAZ Workhorse\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eTAZ 6(\u003ca href=\"https://lulzbot.com/store/lulzbot-taz-5-6-universal-tool-head-adapter-kt-cp0140?ref=KT-CP0140\" target=\"_blank\"\u003ewith Adapter\u003c/a\u003e), Workhorse, Workhorse+\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd\u003e\u003cb\u003eTAZ Pro Platform\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003ePro, Pro S, Pro XT\u003c/td\u003e\u003c/tr\u003e\u003c/tbody\u003e\u003c/table\u003e\u003c/span\u003e\u003c/div\u003e\u003c/div\u003e","description_resources_documentation":"\u003cul style=\"margin-bottom: 0px; font-family: titillium_regular, sans-serif; font-size: 16px; padding-left: 30px;\"\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003ca href=\"https://www.lulzbot.com/cura\" target=\"_blank\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial;\"\u003eCura LulzBot Edition [Software]➡\u003c/a\u003e\u003c/li\u003e\u003c/ul\u003e\u003cul style=\"margin-bottom: 0px; font-family: titillium_regular, sans-serif; font-size: 16px; padding-left: 30px;\"\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003ca href=\"https://ohai.lulzbot.com/project/lulzbot-taz-pro-accessory-tool-head-installation/\" target=\"_blank\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial;\"\u003e\u003cb\u003eInstallation: \u003c/b\u003eTAZ Pro ➡\u003c/a\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003ca href=\"https://ohai.lulzbot.com/project/hs-plus-1_2mm-tool-head-installation-instr/\" target=\"_blank\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial;\"\u003e\u003cb\u003eInstallation:\u003c/b\u003e Mini 2 ➡\u003c/a\u003e\u003c/li\u003e\u003c/ul\u003e\u003cul style=\"margin-bottom: 0px; font-family: titillium_regular, sans-serif; font-size: 16px; padding-left: 30px;\"\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003ca href=\"https://ohai.lulzbot.com/project/mount-adapter-installation-instructions-taz56/\" target=\"_blank\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial;\"\u003e\u003cb\u003eInstallation: \u003c/b\u003eTAZ 5/6 ➡\u003c/a\u003e\u003c/li\u003e\u003c/ul\u003e\u003cul style=\"margin-bottom: 0px; font-family: titillium_regular, sans-serif; font-size: 16px; padding-left: 30px;\"\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003ca href=\"https://ohai.lulzbot.com/project/mount-adapter-installation-instructions-mini1/\" target=\"_blank\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial;\"\u003e\u003cb\u003eInstallation:\u003c/b\u003e Mini 1 ➡\u003c/a\u003e\u003c/li\u003e\u003c/ul\u003e\u003cul style=\"margin-bottom: 0px; font-family: titillium_regular, sans-serif; font-size: 16px; padding-left: 30px;\"\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003ca href=\"https://gitlab.com/lulzbot3d/tool-heads/aero\" target=\"_blank\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial;\"\u003eTitan Aero Tool Head Open Source Files ➡\u003c/a\u003e\u003c/li\u003e\u003c/ul\u003e\u003cul style=\"margin-bottom: 0px; font-family: titillium_regular, sans-serif; font-size: 16px; padding-left: 30px;\"\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003ca href=\"https://ohai.lulzbot.com/project/hsplus-tool-head-assembly-and-packaging/\" target=\"_blank\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial;\"\u003eHS+ Tool Head Open Hardware Assembly Instructions ➡\u003c/a\u003e\u003c/li\u003e\u003c/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c/p\u003e","description_features":"\u003cp\u003e\u003cbr\u003e\u003c/p\u003e","featured":false,"variant_selector":[],"stock":{"global":{"state":"in_stock"}},"brand":null,"images":[{"small":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_60_60-1259.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_300_300-1260.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_500_500-1261.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_60_60-1262.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_300_300-1263.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_500_500-1264.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_60_60-1265.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_300_300-1266.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_500_500-1267.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_60_60-1268.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_300_300-1269.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_500_500-1270.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_60_60-1271.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_300_300-1272.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_500_500-1273.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_60_60-1274.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_300_300-1275.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_500_500-1276.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""}}],"slides_group":[],"variant_attributes_group":{},"id":362,"pack_ok":false,"used_in_pack":[{"objectID":9762},{"objectID":9765},{"objectID":9766},{"objectID":10029}],"index_name":"products"}
Overview

Featuring a hardened steel nozzle and extruder hobb, this industrial 3D printer extruder head is capable of printing high-strength composite polymers on par with PEEK's tensile strength (15,200 psi - ASTM638). These polymers are used in a wide range of high-demand applications, from structural components to the automotive industry. 

Parts printed with these composites have higher impact resistance, resist deformation, while retaining strength in harsh and demanding environments. Industrial materials like PA-CF Low Warp combine strength and dimensional stability (less than 2% elongation at break - ASTM638) with the ability to perform in higher operating temperatures up to approximately 120° C (248° F).

Filament Tension Settings


HS+ Tool Head | 2.85 mm | Hardened Steel | 1.2 mm

HS+ Tool Head | 2.85 mm | Hardened Steel | 1.2 mm


$ 395 00
395.0

{"objectID":1236,"model":{"name":"HS+ Tool Head | 2.85 mm | Hardened Steel | 1.2 mm"},"url_key":"store/lulzbot-hs-tool-head-hardened-steel-1-2-mm-kt-cp0134","redirect_url_key":["lulzbot-hs-tool-head-hardened-steel-1-2-mm-kt-cp0134"],"main":true,"short_description":"\u003cp\u003eProduce high-strength parts that retain their dimensional stability in harsh environments in a fraction of the time! The large 1.2 mm nozzle diameter and massive E3D Volcano Heater Block with elongated melting zone is paired with the E3D Titan Extruder to enable extrusion rates of up to approximately 205 grams/hour.\u003cbr\u003e\u003c/p\u003e","description":"\u003cp style=\"margin-top: 1.16667rem;\"\u003eFeaturing a hardened steel nozzle and extruder hobb, this industrial 3D printer extruder head is capable of printing high-strength composite polymers on par with PEEK's tensile strength (15,200 psi - ASTM638). These polymers are used in a wide range of high-demand applications, from structural components to the automotive industry. \u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003eParts printed with these composites have higher impact resistance, resist deformation, while retaining strength in harsh and demanding environments. Industrial materials like PA-CF Low Warp combine strength and dimensional stability (less than 2% elongation at break - ASTM638) with the ability to perform in higher operating temperatures up to approximately 120° C (248° F).\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; text-align: center;\"\u003e\u003cspan style=\"font-weight: bolder;\"\u003e\u003cfont style=\"font-size: 24px;\"\u003eFilament Tension Settings\u003c/font\u003e\u003c/span\u003e\u003c/p\u003e\u003cp\u003e\u003cimg class=\"img-fluid o_we_custom_image o_we_selected_image d-block mx-auto\" src=\"https://assets.lulzbot.com/lulzbot_aero_tension_graphic-17807.jpg?access_token=9efcd201-b168-4e33-bce8-4fb17c796359\"\u003e\u003c/p\u003e\u003cp\u003e\u003cbr\u003e\u003c/p\u003e","name":"HS+ Tool Head | 2.85 mm | Hardened Steel | 1.2 mm","short_name":"","seo_title":"HS+ Tool Head | 2.85 mm | Hardened Steel | 1.2 mm | Industrial High-Strength 3D Extruder Head","meta_keywords":null,"meta_description":"With a 1.2mm extruder nozzle, the LulzBot HS+ 3D printing head is great for high-speed industrial printing. Order this extruder head for your LulzBot 3D Printer!","variant_count":1,"categories":[{"id":11,"name":"Tool Heads","url_key":"store/tool-heads","level":0},{"id":69,"name":"Legacy Tool Heads \u0026 Adapters","url_key":"store/tool-heads/legacy-tool-heads-adapters","level":1}],"sku":"KT-CP0134","variant_attributes":{},"price":{"value":395.0,"tax_included":false,"original_value":395.0,"discount":0.0},"hierarchicalCategories":[{"level":1,"value":"Tool Heads","ancestors":["All"],"order":8},{"level":2,"value":"Legacy Tool Heads \u0026 Adapters","ancestors":["Tool Heads","All"],"order":10}],"filament_material":[],"compatibility":[],"description_parts_specification":"\u003cp\u003e\u003c/p\u003e\u003cdiv class=\"field--item field--field_printer_parts_specs1\" style=\"padding-bottom: rem; width: 700px; margin-right: auto; margin-left: auto;\"\u003e\u003ctable class=\"table table-bordered\" style=\"text-align: right;\"\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003e\u003cb\u003eExtruder Type\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eSingle Extruder, \u003ca href=\"https://lulzbot.com/store/tool-heads/legacy-tool-heads-adapters\" target=\"_blank\"\u003eLegacy\u003c/a\u003e\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eFilament Diameter\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e2.85mm\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eMaximum Flow Rate\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eTest Data Unavailable\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eFlow Testing\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eTest Data Unavailable\u003cbr\u003e\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eNozzle Diameter\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e1.2mm Hardened Steel\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eNozzle Layer Height Range\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e0.6mm (600 microns) to 0.9mm (900 microns)\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eNozzle Swapping\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eNot Supported\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eSwappable Layer Height Range\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eNot Supported\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eMaximum Hot End Temperature\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e290°C (554°F) - Firmware Limited\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eCompatible Filaments\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e\u003ca href=\"https://lulzbot.com/store/filaments\" target=\"_blank\"\u003ePLA, TPU, ABS, PETg, PVB, Nylon, PC, and others below 290°C\u003c/a\u003e\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eFilament Tension Method\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eAdjustable via Knob, Spring Loaded Idler\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eExtruder Drive Type\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eDirect-Drive, Gear \u0026amp; Idler\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eExtruder E-Steps\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e420 steps/mm\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eLeveling System Compatibility\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eAutomatic 5V Circuit, Automatic BLTouch\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003ePTFE Guide Tube Attachment\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e3D Printed Clamp\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eTool Head Weight\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e609g (21.5oz)\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eTool Head Warranty\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e90-Days\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eCountry of Origin\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eUSA\u003cbr\u003e\u003c/td\u003e\u003c/tr\u003e\u003c/tbody\u003e\u003c/table\u003e\u003c/div\u003e\u003cdiv class=\"field--item field--field_printer_parts_specs1\" style=\"padding-bottom: rem; width: 700px; margin-right: auto; margin-left: auto;\"\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: inherit; font-style: inherit; font-variant-caps: inherit; font-variant-ligatures: inherit; text-align: inherit;\"\u003e \u003cdiv class=\"field--item field--field_printer_parts_specs1\" style=\"padding-bottom: rem; width: 700px; margin-right: auto; margin-left: auto;\"\u003e\u003c/div\u003e\u003c/span\u003e\u003c/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: inherit; font-style: inherit; font-variant-caps: inherit; font-variant-ligatures: inherit; text-align: inherit;\"\u003e\u003ch4\u003eConstruction Materials\u003c/h4\u003e\u003c/span\u003e\u003c/div\u003e\u003ctable class=\"table table-bordered\" style=\"text-align: right;\"\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003e\u003cb\u003eNozzle Material\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eHardened Steel\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eHeater Block Material\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eAluminum, Volcano Configuration\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eHeat Break Material\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eStainless Steel\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eFan Shroud and Mount Material\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e\u003ca href=\"https://lulzbot.com/store/polymaker-polylite-abs-filament?ref=RM-AB0160\" target=\"_blank\"\u003ePolymaker ABS\u003c/a\u003e\u003cbr\u003e\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eCold Block and Heat Sink Material\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eAluminum\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eDrive Gear Material\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003ePlastic Drive and Hardened Steel Hobb\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eExtruder Motor Size\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e48mm, 1.8° NEMA 17 Stepper\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eHeater Cartridge\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e24V, 40W\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eTemperature Sensor\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e\u003ca href=\"https://lulzbot.com/store/100k-semitec-ntc-thermistor-kt-cp0110?ref=KT-CP0110\" target=\"_blank\"\u003e100k Semitec NTC Thermistor\u003c/a\u003e\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003ePart Cooling Fan\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e24V DC Centrifugal Blower \u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eHeat Sink Fan\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e5V DC Axial Fan\u003c/td\u003e\u003c/tr\u003e\u003c/tbody\u003e\u003c/table\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: inherit; font-style: inherit; font-variant-caps: inherit; font-variant-ligatures: inherit; text-align: inherit;\"\u003e\u003cp\u003e\u003cbr\u003e\u003c/p\u003e\u003ch4\u003eCompatible 3D Printers\u003c/h4\u003e\u003ctable class=\"table table-bordered\" style=\"font-size: 13px; font-style: inherit; font-variant-ligatures: inherit; font-variant-caps: inherit; text-align: right;\"\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003e\u003cb\u003eTAZ SideKick\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eSideKick 289, SideKick 747\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd\u003e\u003cb\u003eMini Platform\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eMini 1(\u003ca href=\"https://lulzbot.com/store/lulzbot-mini-1-universal-tool-head-adapter-kt-cp0141?ref=KT-CP0141\" target=\"_blank\"\u003ewith Adapter\u003c/a\u003e), Mini 2\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd\u003e\u003cb\u003eTAZ Workhorse\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eTAZ 6(\u003ca href=\"https://lulzbot.com/store/lulzbot-taz-5-6-universal-tool-head-adapter-kt-cp0140?ref=KT-CP0140\" target=\"_blank\"\u003ewith Adapter\u003c/a\u003e), Workhorse, Workhorse+\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd\u003e\u003cb\u003eTAZ Pro Platform\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003ePro, Pro S, Pro XT\u003c/td\u003e\u003c/tr\u003e\u003c/tbody\u003e\u003c/table\u003e\u003c/span\u003e\u003c/div\u003e\u003c/div\u003e","description_resources_documentation":"\u003cul style=\"margin-bottom: 0px; font-family: titillium_regular, sans-serif; font-size: 16px; padding-left: 30px;\"\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003ca href=\"https://www.lulzbot.com/cura\" target=\"_blank\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial;\"\u003eCura LulzBot Edition [Software]➡\u003c/a\u003e\u003c/li\u003e\u003c/ul\u003e\u003cul style=\"margin-bottom: 0px; font-family: titillium_regular, sans-serif; font-size: 16px; padding-left: 30px;\"\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003ca href=\"https://ohai.lulzbot.com/project/lulzbot-taz-pro-accessory-tool-head-installation/\" target=\"_blank\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial;\"\u003e\u003cb\u003eInstallation: \u003c/b\u003eTAZ Pro ➡\u003c/a\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003ca href=\"https://ohai.lulzbot.com/project/hs-plus-1_2mm-tool-head-installation-instr/\" target=\"_blank\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial;\"\u003e\u003cb\u003eInstallation:\u003c/b\u003e Mini 2 ➡\u003c/a\u003e\u003c/li\u003e\u003c/ul\u003e\u003cul style=\"margin-bottom: 0px; font-family: titillium_regular, sans-serif; font-size: 16px; padding-left: 30px;\"\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003ca href=\"https://ohai.lulzbot.com/project/mount-adapter-installation-instructions-taz56/\" target=\"_blank\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial;\"\u003e\u003cb\u003eInstallation: \u003c/b\u003eTAZ 5/6 ➡\u003c/a\u003e\u003c/li\u003e\u003c/ul\u003e\u003cul style=\"margin-bottom: 0px; font-family: titillium_regular, sans-serif; font-size: 16px; padding-left: 30px;\"\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003ca href=\"https://ohai.lulzbot.com/project/mount-adapter-installation-instructions-mini1/\" target=\"_blank\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial;\"\u003e\u003cb\u003eInstallation:\u003c/b\u003e Mini 1 ➡\u003c/a\u003e\u003c/li\u003e\u003c/ul\u003e\u003cul style=\"margin-bottom: 0px; font-family: titillium_regular, sans-serif; font-size: 16px; padding-left: 30px;\"\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003ca href=\"https://gitlab.com/lulzbot3d/tool-heads/aero\" target=\"_blank\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial;\"\u003eTitan Aero Tool Head Open Source Files ➡\u003c/a\u003e\u003c/li\u003e\u003c/ul\u003e\u003cul style=\"margin-bottom: 0px; font-family: titillium_regular, sans-serif; font-size: 16px; padding-left: 30px;\"\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003ca href=\"https://ohai.lulzbot.com/project/hsplus-tool-head-assembly-and-packaging/\" target=\"_blank\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial;\"\u003eHS+ Tool Head Open Hardware Assembly Instructions ➡\u003c/a\u003e\u003c/li\u003e\u003c/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c/p\u003e","description_features":"\u003cp\u003e\u003cbr\u003e\u003c/p\u003e","featured":false,"variant_selector":[],"stock":{"global":{"state":"in_stock"}},"brand":null,"images":[{"small":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_60_60-1259.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_300_300-1260.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_500_500-1261.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_60_60-1262.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_300_300-1263.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_500_500-1264.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_60_60-1265.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_300_300-1266.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_500_500-1267.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_60_60-1268.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_300_300-1269.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_500_500-1270.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_60_60-1271.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_300_300-1272.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_500_500-1273.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_60_60-1274.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_300_300-1275.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_500_500-1276.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""}}],"slides_group":[],"variant_attributes_group":{},"id":362,"pack_ok":false,"used_in_pack":[{"objectID":9762},{"objectID":9765},{"objectID":9766},{"objectID":10029}],"index_name":"products"}
{"objectID":1236,"model":{"name":"HS+ Tool Head | 2.85 mm | Hardened Steel | 1.2 mm"},"url_key":"store/lulzbot-hs-tool-head-hardened-steel-1-2-mm-kt-cp0134","redirect_url_key":["lulzbot-hs-tool-head-hardened-steel-1-2-mm-kt-cp0134"],"main":true,"short_description":"\u003cp\u003eProduce high-strength parts that retain their dimensional stability in harsh environments in a fraction of the time! The large 1.2 mm nozzle diameter and massive E3D Volcano Heater Block with elongated melting zone is paired with the E3D Titan Extruder to enable extrusion rates of up to approximately 205 grams/hour.\u003cbr\u003e\u003c/p\u003e","description":"\u003cp style=\"margin-top: 1.16667rem;\"\u003eFeaturing a hardened steel nozzle and extruder hobb, this industrial 3D printer extruder head is capable of printing high-strength composite polymers on par with PEEK's tensile strength (15,200 psi - ASTM638). These polymers are used in a wide range of high-demand applications, from structural components to the automotive industry. \u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003eParts printed with these composites have higher impact resistance, resist deformation, while retaining strength in harsh and demanding environments. Industrial materials like PA-CF Low Warp combine strength and dimensional stability (less than 2% elongation at break - ASTM638) with the ability to perform in higher operating temperatures up to approximately 120° C (248° F).\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; text-align: center;\"\u003e\u003cspan style=\"font-weight: bolder;\"\u003e\u003cfont style=\"font-size: 24px;\"\u003eFilament Tension Settings\u003c/font\u003e\u003c/span\u003e\u003c/p\u003e\u003cp\u003e\u003cimg class=\"img-fluid o_we_custom_image o_we_selected_image d-block mx-auto\" src=\"https://assets.lulzbot.com/lulzbot_aero_tension_graphic-17807.jpg?access_token=9efcd201-b168-4e33-bce8-4fb17c796359\"\u003e\u003c/p\u003e\u003cp\u003e\u003cbr\u003e\u003c/p\u003e","name":"HS+ Tool Head | 2.85 mm | Hardened Steel | 1.2 mm","short_name":"","seo_title":"HS+ Tool Head | 2.85 mm | Hardened Steel | 1.2 mm | Industrial High-Strength 3D Extruder Head","meta_keywords":null,"meta_description":"With a 1.2mm extruder nozzle, the LulzBot HS+ 3D printing head is great for high-speed industrial printing. Order this extruder head for your LulzBot 3D Printer!","variant_count":1,"categories":[{"id":11,"name":"Tool Heads","url_key":"store/tool-heads","level":0},{"id":69,"name":"Legacy Tool Heads \u0026 Adapters","url_key":"store/tool-heads/legacy-tool-heads-adapters","level":1}],"sku":"KT-CP0134","variant_attributes":{},"price":{"value":395.0,"tax_included":false,"original_value":395.0,"discount":0.0},"hierarchicalCategories":[{"level":1,"value":"Tool Heads","ancestors":["All"],"order":8},{"level":2,"value":"Legacy Tool Heads \u0026 Adapters","ancestors":["Tool Heads","All"],"order":10}],"filament_material":[],"compatibility":[],"description_parts_specification":"\u003cp\u003e\u003c/p\u003e\u003cdiv class=\"field--item field--field_printer_parts_specs1\" style=\"padding-bottom: rem; width: 700px; margin-right: auto; margin-left: auto;\"\u003e\u003ctable class=\"table table-bordered\" style=\"text-align: right;\"\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003e\u003cb\u003eExtruder Type\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eSingle Extruder, \u003ca href=\"https://lulzbot.com/store/tool-heads/legacy-tool-heads-adapters\" target=\"_blank\"\u003eLegacy\u003c/a\u003e\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eFilament Diameter\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e2.85mm\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eMaximum Flow Rate\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eTest Data Unavailable\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eFlow Testing\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eTest Data Unavailable\u003cbr\u003e\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eNozzle Diameter\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e1.2mm Hardened Steel\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eNozzle Layer Height Range\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e0.6mm (600 microns) to 0.9mm (900 microns)\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eNozzle Swapping\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eNot Supported\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eSwappable Layer Height Range\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eNot Supported\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eMaximum Hot End Temperature\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e290°C (554°F) - Firmware Limited\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eCompatible Filaments\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e\u003ca href=\"https://lulzbot.com/store/filaments\" target=\"_blank\"\u003ePLA, TPU, ABS, PETg, PVB, Nylon, PC, and others below 290°C\u003c/a\u003e\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eFilament Tension Method\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eAdjustable via Knob, Spring Loaded Idler\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eExtruder Drive Type\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eDirect-Drive, Gear \u0026amp; Idler\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eExtruder E-Steps\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e420 steps/mm\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eLeveling System Compatibility\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eAutomatic 5V Circuit, Automatic BLTouch\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003ePTFE Guide Tube Attachment\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e3D Printed Clamp\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eTool Head Weight\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e609g (21.5oz)\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eTool Head Warranty\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e90-Days\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eCountry of Origin\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eUSA\u003cbr\u003e\u003c/td\u003e\u003c/tr\u003e\u003c/tbody\u003e\u003c/table\u003e\u003c/div\u003e\u003cdiv class=\"field--item field--field_printer_parts_specs1\" style=\"padding-bottom: rem; width: 700px; margin-right: auto; margin-left: auto;\"\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: inherit; font-style: inherit; font-variant-caps: inherit; font-variant-ligatures: inherit; text-align: inherit;\"\u003e \u003cdiv class=\"field--item field--field_printer_parts_specs1\" style=\"padding-bottom: rem; width: 700px; margin-right: auto; margin-left: auto;\"\u003e\u003c/div\u003e\u003c/span\u003e\u003c/div\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: inherit; font-style: inherit; font-variant-caps: inherit; font-variant-ligatures: inherit; text-align: inherit;\"\u003e\u003ch4\u003eConstruction Materials\u003c/h4\u003e\u003c/span\u003e\u003c/div\u003e\u003ctable class=\"table table-bordered\" style=\"text-align: right;\"\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003e\u003cb\u003eNozzle Material\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eHardened Steel\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eHeater Block Material\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eAluminum, Volcano Configuration\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eHeat Break Material\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eStainless Steel\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eFan Shroud and Mount Material\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e\u003ca href=\"https://lulzbot.com/store/polymaker-polylite-abs-filament?ref=RM-AB0160\" target=\"_blank\"\u003ePolymaker ABS\u003c/a\u003e\u003cbr\u003e\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eCold Block and Heat Sink Material\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eAluminum\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eDrive Gear Material\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003ePlastic Drive and Hardened Steel Hobb\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eExtruder Motor Size\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e48mm, 1.8° NEMA 17 Stepper\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eHeater Cartridge\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e24V, 40W\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eTemperature Sensor\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e\u003ca href=\"https://lulzbot.com/store/100k-semitec-ntc-thermistor-kt-cp0110?ref=KT-CP0110\" target=\"_blank\"\u003e100k Semitec NTC Thermistor\u003c/a\u003e\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003ePart Cooling Fan\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e24V DC Centrifugal Blower \u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd style=\"text-align: right;\"\u003e\u003cb\u003eHeat Sink Fan\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003e5V DC Axial Fan\u003c/td\u003e\u003c/tr\u003e\u003c/tbody\u003e\u003c/table\u003e\u003cdiv style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: inherit; font-style: inherit; font-variant-caps: inherit; font-variant-ligatures: inherit; text-align: inherit;\"\u003e\u003cp\u003e\u003cbr\u003e\u003c/p\u003e\u003ch4\u003eCompatible 3D Printers\u003c/h4\u003e\u003ctable class=\"table table-bordered\" style=\"font-size: 13px; font-style: inherit; font-variant-ligatures: inherit; font-variant-caps: inherit; text-align: right;\"\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003e\u003cb\u003eTAZ SideKick\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eSideKick 289, SideKick 747\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd\u003e\u003cb\u003eMini Platform\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eMini 1(\u003ca href=\"https://lulzbot.com/store/lulzbot-mini-1-universal-tool-head-adapter-kt-cp0141?ref=KT-CP0141\" target=\"_blank\"\u003ewith Adapter\u003c/a\u003e), Mini 2\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd\u003e\u003cb\u003eTAZ Workhorse\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003eTAZ 6(\u003ca href=\"https://lulzbot.com/store/lulzbot-taz-5-6-universal-tool-head-adapter-kt-cp0140?ref=KT-CP0140\" target=\"_blank\"\u003ewith Adapter\u003c/a\u003e), Workhorse, Workhorse+\u003c/td\u003e\u003c/tr\u003e\u003ctr\u003e\u003ctd\u003e\u003cb\u003eTAZ Pro Platform\u003c/b\u003e\u003c/td\u003e\u003ctd style=\"text-align: left;\"\u003ePro, Pro S, Pro XT\u003c/td\u003e\u003c/tr\u003e\u003c/tbody\u003e\u003c/table\u003e\u003c/span\u003e\u003c/div\u003e\u003c/div\u003e","description_resources_documentation":"\u003cul style=\"margin-bottom: 0px; font-family: titillium_regular, sans-serif; font-size: 16px; padding-left: 30px;\"\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003ca href=\"https://www.lulzbot.com/cura\" target=\"_blank\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial;\"\u003eCura LulzBot Edition [Software]➡\u003c/a\u003e\u003c/li\u003e\u003c/ul\u003e\u003cul style=\"margin-bottom: 0px; font-family: titillium_regular, sans-serif; font-size: 16px; padding-left: 30px;\"\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003ca href=\"https://ohai.lulzbot.com/project/lulzbot-taz-pro-accessory-tool-head-installation/\" target=\"_blank\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial;\"\u003e\u003cb\u003eInstallation: \u003c/b\u003eTAZ Pro ➡\u003c/a\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003ca href=\"https://ohai.lulzbot.com/project/hs-plus-1_2mm-tool-head-installation-instr/\" target=\"_blank\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial;\"\u003e\u003cb\u003eInstallation:\u003c/b\u003e Mini 2 ➡\u003c/a\u003e\u003c/li\u003e\u003c/ul\u003e\u003cul style=\"margin-bottom: 0px; font-family: titillium_regular, sans-serif; font-size: 16px; padding-left: 30px;\"\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003ca href=\"https://ohai.lulzbot.com/project/mount-adapter-installation-instructions-taz56/\" target=\"_blank\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial;\"\u003e\u003cb\u003eInstallation: \u003c/b\u003eTAZ 5/6 ➡\u003c/a\u003e\u003c/li\u003e\u003c/ul\u003e\u003cul style=\"margin-bottom: 0px; font-family: titillium_regular, sans-serif; font-size: 16px; padding-left: 30px;\"\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003ca href=\"https://ohai.lulzbot.com/project/mount-adapter-installation-instructions-mini1/\" target=\"_blank\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial;\"\u003e\u003cb\u003eInstallation:\u003c/b\u003e Mini 1 ➡\u003c/a\u003e\u003c/li\u003e\u003c/ul\u003e\u003cul style=\"margin-bottom: 0px; font-family: titillium_regular, sans-serif; font-size: 16px; padding-left: 30px;\"\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003ca href=\"https://gitlab.com/lulzbot3d/tool-heads/aero\" target=\"_blank\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial;\"\u003eTitan Aero Tool Head Open Source Files ➡\u003c/a\u003e\u003c/li\u003e\u003c/ul\u003e\u003cul style=\"margin-bottom: 0px; font-family: titillium_regular, sans-serif; font-size: 16px; padding-left: 30px;\"\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003ca href=\"https://ohai.lulzbot.com/project/hsplus-tool-head-assembly-and-packaging/\" target=\"_blank\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial;\"\u003eHS+ Tool Head Open Hardware Assembly Instructions ➡\u003c/a\u003e\u003c/li\u003e\u003c/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c/p\u003e","description_features":"\u003cp\u003e\u003cbr\u003e\u003c/p\u003e","featured":false,"variant_selector":[],"stock":{"global":{"state":"in_stock"}},"brand":null,"images":[{"small":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_60_60-1259.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_300_300-1260.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_500_500-1261.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_60_60-1262.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_300_300-1263.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_500_500-1264.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_60_60-1265.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_300_300-1266.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_500_500-1267.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_60_60-1268.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_300_300-1269.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_500_500-1270.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_60_60-1271.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_300_300-1272.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_500_500-1273.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_60_60-1274.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_300_300-1275.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-hs-tool-head-hardened-steel-1-2-mm_500_500-1276.png","alt":"LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm","tag":""}}],"slides_group":[],"variant_attributes_group":{},"id":362,"pack_ok":false,"used_in_pack":[{"objectID":9762},{"objectID":9765},{"objectID":9766},{"objectID":10029}],"index_name":"products"}
.