Loading...

M175 v2 Tool Head | 1.75 mm | Single Extruder | 0.5 mm

LulzBot honors your freedom to print.
Add 1.75 mm filament capability to your LulzBot 3D printer and open up an even wider variety of 3D printing materials.  The M175 v2 Tool Head is here to bring the world of 1.75 mm material to your LulzBot Mini 2, TAZ Workhorse, and TAZ Pro. 

Read more
Compatibility:
LulzBot Mini v2.0, Boxed for Retail, NA
LulzBot TAZ 3D Printer, Pro Boxed for Retail, NA
LulzBot TAZ 3D Printer, Workhorse, Boxed for Retail, NA
LulzBot TAZ SideKick 289 3D Printer, Boxed for Retail, NA
LulzBot TAZ SideKick 747 3D Printer, Boxed for Retail, NA

The 1.75 mm dual-drive extruder on the new LulzBot M175 v2 Tool Head feeds material reliably. Built to handle the toughest industrial-strength materials to the most basic materials, the M175 v2 prints a wide range of filament - from nylon and soft flexible materials to PLA and rigid and brittle carbon-filled high-strength materials. 

Material changes are easy using the quick release lever.  A thumbscrew tensioner allows the you to fine-tune the pressure exerted by the drive gears onto the filament. It provides uninterrupted material flow without fear of grinding or slipping. 

The lightweight hot end provides superior heat break performance - it conducts 85% less heat than a standard threaded heat break. The small hot end mass allows for more rapid motion. 

M175 Airflow

The M175 v2 Tool Head comes with a 0.5 mm Bridgemaster™ nozzle for beautiful, high-resolution prints.

The sturdy fan duct mounts with one screw and has been designed for maximum efficiency using airflow analysis to ensure even 360° part cooling. The fan duct also provides a clear view of the printing surface so you can inspect layer quality during printing.

Parts Included

(1) LulzBot M175 v2 Tool Head | 0.5 mm (Fully Assembled)

Specifications

Layer Resolution: 0.05 mm - 0.5 mm (0.002 in - 0.020 in)

Filament Diameter: 1.75 mm

Nozzle Diameter: 0.5 mm

Nozzle: Slice Engineering® Bridgemaster™ nozzle

Hot End Temperature Range: 120°C - 290°C (248°F - 554°F)

Hot End Heatup Time: From 23°C to 210°C (73°F to 410°F) in 95 seconds

Extruder & Hot End: Bond Tech BMG, Slice Engineering® Mosquito Hotend®

Required power system: 24 Volts

Fans: (1) 5v 25 mm heat sink cooling fan, and (1)  24v centrifugal print cooling fan

Weight: 436.5 g (0.96 lbs)

$ 375 00
375.0
{"objectID":2772,"model":{"name":"M175 v2 Tool Head | 1.75 mm | Single Extruder | 0.5 mm"},"url_key":"store/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm-kt-cp0175","redirect_url_key":["lulzbot-m175-tool-head-single-extruder-kt-cp0175","lulzbot-m175-tool-head-single-extruder-0-5-mm-kt-cp0175","lulzbot-m175-v2-tool-head-single-extruder-0-5-mm-kt-cp0175","lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm-kt-cp0175"],"main":true,"short_description":"\u003cp\u003e\u003cspan style=\"font-family: titillium_regular, sans-serif; font-size: 18px;\"\u003eLulzBot honors your freedom to print.\u003c/span\u003e\u003cbr style=\"font-family: titillium_regular, sans-serif; font-size: 18px;\"\u003e\u003cspan style=\"font-family: titillium_regular, sans-serif; font-size: 18px;\"\u003eAdd 1.75 mm filament capability to your LulzBot 3D printer and open up an even wider variety of 3D printing materials.  The M175\u003c/span\u003e\u003cspan style=\"text-align: inherit; font-size: 18px;\"\u003e\u003cfont\u003e v2\u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_regular, sans-serif; font-size: 18px; color: rgb(0, 0, 0); font-style: inherit; font-variant-ligatures: inherit; font-variant-caps: inherit; font-weight: inherit; text-align: inherit;\"\u003e Tool Head is here to bring the world of 1.75 mm material to your LulzBot Mini 2, TAZ Workhorse, and TAZ Pro. \u003c/span\u003e\u003c/p\u003e","description":"\u003cp\u003e\u003ca href=\"https://www.lulzbot.com/store/tool-heads/m175-tool-head-175-mm-single-extruder-05-mm#\" class=\"toggle alert-toggle\" style=\"color: rgb(193, 214, 64); background: rgb(62, 62, 62); position: relative; display: block; padding: 0.66667rem 1rem; font-size: 0.8rem; line-height: 1.3125em; font-family: latobold, sans-serif; text-transform: uppercase; transition: color 0.3s ease-in-out 0s; margin-top: 20px; --darkreader-inline-color:#d3e081; --darkreader-inline-bgimage: initial; --darkreader-inline-bgcolor:#242729;\"\u003ePRODUCT ALERT \u003cspan class=\"alert-count\" style=\"font-family: latoregular, sans-serif;\"\u003e(2)\u003c/span\u003e\u003c/a\u003e\u003c/p\u003e\u003cdiv id=\"alert\" style=\"font-family: titillium_regular, sans-serif; font-size: 18px; margin-bottom: 1.33333rem; color: rgb(255, 255, 255); background-color: rgb(62, 62, 62); --darkreader-inline-color:#f7f5f3; --darkreader-inline-bgcolor:#242729;\"\u003e\u003cdiv style=\"padding: 0px 1.33333rem 1.33333rem;\"\u003e\u003cdiv class=\"field-collection-container clearfix\"\u003e\u003cul class=\"list--ruled\" style=\"margin-right: 0px; margin-bottom: 0px; margin-left: 0px; padding: 0px;\"\u003e\u003cli style=\"list-style: none; margin-top: 0px; padding-top: 1.33333rem; border-top: 0px rgba(255, 255, 255, 0.2); --darkreader-inline-border-top:rgba(38, 40, 42, 0.2);\"\u003e\u003cdiv class=\"alert-title heading--bold\" style=\"font-family: latobold, sans-serif; margin-bottom: 0.33333rem;\"\u003eCompatibility Alert:\u003c/div\u003e\u003cdiv class=\"alert-content\"\u003e\u003cp\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003eThis extruder only supports 1.75 mm size filament.\u003c/span\u003e​\u003cbr\u003e\u003cbr\u003eThis tool head is currently compatible with LulzBot Mini 2, TAZ Workhorse and TAZ Pro 3D printers.\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003eTAZ 6 users can add this tool head with the \u003ca href=\"https://shop.lulzbot.com/lulzbot-taz-5-6-universal-tool-head-adapter-kt-cp0140?ref=KT-CP0140\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px; --darkreader-inline-color:#eefe8a; --darkreader-inline-bgimage: initial;\" target=\"_blank\"\u003eTAZ 6 Universal Tool Head Adapter\u003c/a\u003e.\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003eNote: M175 v1 has been discontinued. You can perform the upgrade to the M175 v2 with instructions here.\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003eNote: M175v1 has been discontinued. With that Mini 1 and TAZ 5 users that still own an M175v1 will be able to continue to use it.\u003cbr\u003e\u003cbr\u003eNote: Mini 1 users will need to \u003ca href=\"https://download.lulzbot.com/Mini/accessories/wiper_pad_models/\" target=\"_blank\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px; --darkreader-inline-color:#eefe8a; --darkreader-inline-bgimage: initial;\"\u003edownload and print a new wiper pad mount\u003c/a\u003e before installing the new M175 Tool Head.\u003c/p\u003e\u003c/div\u003e\u003c/li\u003e\u003cli style=\"margin-top: 1.33333rem; list-style: none; padding-top: 1.33333rem; border-top: 1px solid rgba(255, 255, 255, 0.2); --darkreader-inline-border-top:rgba(38, 40, 42, 0.2);\"\u003e\u003cdiv class=\"alert-title heading--bold\" style=\"font-family: latobold, sans-serif; margin-bottom: 0.33333rem;\"\u003e1.75 mm Filament Now Available!\u003c/div\u003e\u003cdiv class=\"alert-content\"\u003e\u003cp\u003eCheck out the variety of materials on the LulzBot website with pre-made profiles in LE Cura for the M175 v2 Tool Head:\u003c/p\u003e\u003cul style=\"margin-top: 1.55556rem; padding-left: 30px;\"\u003e\u003cli\u003e\u003ca href=\"https://shop.lulzbot.com/polymaker-polylite-pla-filament?ref=RM-PL0226\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px; --darkreader-inline-color:#eefe8a; --darkreader-inline-bgimage: initial;\" target=\"_blank\"\u003e1.75 mm PolyLite PLA by Polymaker  \u003c/a\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003ca href=\"https://shop.lulzbot.com/3d-fuel-standard-pla-filament?ref=RM-PL0175\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px; --darkreader-inline-color:#eefe8a; --darkreader-inline-bgimage: initial;\" target=\"_blank\"\u003e1.75 mm Standard PLA by 3D-Fuel\u003c/a\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003ca href=\"https://shop.lulzbot.com/3d-fuel-pro-pla-filament?ref=RM-PL0222\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px; --darkreader-inline-color:#eefe8a; --darkreader-inline-bgimage: initial;\" target=\"_blank\"\u003e1.75 mm Pro PLA by 3D-Fuel\u003c/a\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003ca href=\"https://shop.lulzbot.com/ic3d-abs-filament?ref=RM-AB0143\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px; --darkreader-inline-color:#eefe8a; --darkreader-inline-bgimage: initial;\" target=\"_blank\"\u003e1.75 mm ABS by IC3D\u003c/a\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003ca href=\"https://shop.lulzbot.com/ic3d-petg-filament?ref=RM-PE0017\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px; --darkreader-inline-color:#eefe8a; --darkreader-inline-bgimage: initial;\" target=\"_blank\"\u003e1.75 mm PETg by IC3D\u003c/a\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003ca href=\"https://shop.lulzbot.com/fenner-drives-ninjaflex-filament?ref=RM-TE0040\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px; --darkreader-inline-color:#eefe8a; --darkreader-inline-bgimage: initial;\" target=\"_blank\"\u003e1.75 mm NinjaFlex by NinjaTek\u003c/a\u003e\u003c/li\u003e\u003c/ul\u003e\u003c/div\u003e\u003c/li\u003e\u003c/ul\u003e\u003c/div\u003e\u003c/div\u003e\u003c/div\u003e\u003cp style=\"font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cbr\u003e\u003c/p\u003e","name":"M175 v2 Tool Head | 1.75 mm | Single Extruder | 0.5 mm","short_name":"","seo_title":"M175 v2 Tool Head | 1.75 mm | Single Extruder | 0.5 mm","meta_keywords":null,"meta_description":"Bring the world of 1.75mm material to your LulzBot Mini 2, TAZ Workhorse, and TAZ Pro!","variant_count":1,"categories":[{"id":11,"name":"Tool Heads","url_key":"store/tool-heads","level":0}],"sku":"KT-CP0175","variant_attributes":{},"price":{"value":375.0,"tax_included":false,"original_value":375.0,"discount":0.0},"hierarchicalCategories":[{"level":1,"value":"Tool Heads","ancestors":["All"],"order":3}],"filament_material":[],"compatibility":[{"name":"LulzBot Mini v2.0, Boxed for Retail, NA"},{"name":"LulzBot TAZ 3D Printer, Pro Boxed for Retail, NA"},{"name":"LulzBot TAZ 3D Printer, Workhorse, Boxed for Retail, NA"},{"name":"LulzBot TAZ SideKick 289 3D Printer, Boxed for Retail, NA"},{"name":"LulzBot TAZ SideKick 747 3D Printer, Boxed for Retail, NA"}],"description_parts_specification":"\u003ch4 style=\"font-size: 1.2rem; line-height: 1.25em; padding-bottom: 0.5rem; margin-bottom: 0px; border-bottom: 1px solid rgb(224, 224, 224); font-family: latobold, sans-serif; color: rgb(102, 102, 102); --darkreader-inline-border-bottom:#303335; --darkreader-inline-color:#aba59e;\"\u003eParts Included\u003c/h4\u003e\u003cp style=\"font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e(1) LulzBot M175 v2 Tool Head | 0.5 mm (Fully Assembled)\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eSpecifications\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eLayer Resolution: 0.05 mm - 0.5 mm (0.002 in - 0.020 in)\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eFilament Diameter: 1.75 mm\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eNozzle Diameter: 0.5 mm\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eNozzle: Slice Engineering® Bridgemaster™ nozzle\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eHot End Temperature Range: 120°C - 290°C (248°F - 554°F)\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eHot End Heatup Time: From 23°C to 210°C (73°F to 410°F) in 95 seconds\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eExtruder \u0026amp; Hot End: Bond Tech BMG, Slice Engineering® Mosquito Hotend®\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eRequired power system: 24 Volts\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eFans: (1) 5v 25 mm heat sink cooling fan, and (1)  24v centrifugal print cooling fan\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eWeight: 436.5 g (0.96 lbs)\u003c/p\u003e","description_resources_documentation":"\u003cp style=\"font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003ca href=\"https://gitlab.com/lulzbot3d/tool-heads/lutefisk\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px; --darkreader-inline-bgimage: initial; --darkreader-inline-color:#eefe8a;\"\u003eSource \u0026amp; Documentation\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003ca href=\"https://ohai.lulzbot.com/project/mount-adapter-installation-instructions-mini1\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px; --darkreader-inline-bgimage: initial; --darkreader-inline-color:#eefe8a;\"\u003eInstallation Instructions: LulzBot Mini 1\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003ca href=\"https://ohai.lulzbot.com/project/mount-adapter-installation-instructions-taz56\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px; --darkreader-inline-bgimage: initial; --darkreader-inline-color:#eefe8a;\"\u003eInstallation Instructions: LulzBot TAZ 6, 5\u003c/a\u003e\u003c/p\u003e","description_features":"\u003cp style=\"font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eThe 1.75 mm dual-drive extruder on the new LulzBot M175 v2 Tool Head feeds material reliably. Built to handle the toughest industrial-strength materials to the most basic materials, the M175 v2 prints a wide range of filament - from nylon and soft flexible materials to PLA and rigid and brittle carbon-filled high-strength materials. \u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eMaterial changes are easy using the quick release lever.  A thumbscrew tensioner allows the you to fine-tune the pressure exerted by the drive gears onto the filament. It provides uninterrupted material flow without fear of grinding or slipping. \u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eThe lightweight hot end provides superior heat break performance - it conducts 85% less heat than a standard threaded heat break. The small hot end mass allows for more rapid motion. \u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003ca href=\"https://www.lulzbot.com/sites/default/files/2020-07-23-m175-6.gif\" target=\"_blank\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px; --darkreader-inline-color:#eefe8a; --darkreader-inline-bgimage: initial;\"\u003e\u003cimg alt=\"M175 Airflow\" class=\"mobile_img\" src=\"https://www.lulzbot.com/sites/default/files/2020-07-23-m175-6.gif\" title=\"M175 Airflow\" style=\"border: 0px; max-width: 300px; height: auto; width: 300px; margin: 10px 15px 10px 0px; float: left; --darkreader-inline-border-top: initial; --darkreader-inline-border-right: initial; --darkreader-inline-border-bottom: initial; --darkreader-inline-border-left: initial;\"\u003e\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eThe M175 v2 Tool Head comes with a 0.5 mm Bridgemaster™ nozzle for beautiful, high-resolution prints.\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eThe sturdy fan duct mounts with one screw and has been designed for maximum efficiency using airflow analysis to ensure even 360° part cooling. The fan duct also provides a clear view of the printing surface so you can inspect layer quality during printing.\u003c/p\u003e","featured":true,"variant_selector":[],"stock":{"global":{"state":"in_stock"}},"brand":null,"images":[{"small":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_60_60-14213.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_300_300-14214.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_500_500-14215.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_60_60-14216.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_300_300-14217.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_500_500-14218.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_60_60-14219.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_300_300-14220.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_500_500-14221.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_60_60-14222.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_300_300-14223.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_500_500-14224.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_60_60-14225.png","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_300_300-14226.png","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_500_500-14227.png","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_60_60-14228.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_300_300-14229.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_500_500-14230.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_60_60-14231.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_300_300-14232.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_500_500-14233.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_60_60-14234.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_300_300-14235.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_500_500-14236.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_60_60-14237.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_300_300-14238.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_500_500-14239.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""}}],"slides_group":[],"variant_attributes_group":{},"id":353,"pack_ok":false,"used_in_pack":[],"index_name":"products"}
Overview

PRODUCT ALERT (2)


M175 v2 Tool Head | 1.75 mm | Single Extruder | 0.5 mm

M175 v2 Tool Head | 1.75 mm | Single Extruder | 0.5 mm


$ 375 00
375.0

{"objectID":2772,"model":{"name":"M175 v2 Tool Head | 1.75 mm | Single Extruder | 0.5 mm"},"url_key":"store/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm-kt-cp0175","redirect_url_key":["lulzbot-m175-tool-head-single-extruder-kt-cp0175","lulzbot-m175-tool-head-single-extruder-0-5-mm-kt-cp0175","lulzbot-m175-v2-tool-head-single-extruder-0-5-mm-kt-cp0175","lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm-kt-cp0175"],"main":true,"short_description":"\u003cp\u003e\u003cspan style=\"font-family: titillium_regular, sans-serif; font-size: 18px;\"\u003eLulzBot honors your freedom to print.\u003c/span\u003e\u003cbr style=\"font-family: titillium_regular, sans-serif; font-size: 18px;\"\u003e\u003cspan style=\"font-family: titillium_regular, sans-serif; font-size: 18px;\"\u003eAdd 1.75 mm filament capability to your LulzBot 3D printer and open up an even wider variety of 3D printing materials.  The M175\u003c/span\u003e\u003cspan style=\"text-align: inherit; font-size: 18px;\"\u003e\u003cfont\u003e v2\u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_regular, sans-serif; font-size: 18px; color: rgb(0, 0, 0); font-style: inherit; font-variant-ligatures: inherit; font-variant-caps: inherit; font-weight: inherit; text-align: inherit;\"\u003e Tool Head is here to bring the world of 1.75 mm material to your LulzBot Mini 2, TAZ Workhorse, and TAZ Pro. \u003c/span\u003e\u003c/p\u003e","description":"\u003cp\u003e\u003ca href=\"https://www.lulzbot.com/store/tool-heads/m175-tool-head-175-mm-single-extruder-05-mm#\" class=\"toggle alert-toggle\" style=\"color: rgb(193, 214, 64); background: rgb(62, 62, 62); position: relative; display: block; padding: 0.66667rem 1rem; font-size: 0.8rem; line-height: 1.3125em; font-family: latobold, sans-serif; text-transform: uppercase; transition: color 0.3s ease-in-out 0s; margin-top: 20px; --darkreader-inline-color:#d3e081; --darkreader-inline-bgimage: initial; --darkreader-inline-bgcolor:#242729;\"\u003ePRODUCT ALERT \u003cspan class=\"alert-count\" style=\"font-family: latoregular, sans-serif;\"\u003e(2)\u003c/span\u003e\u003c/a\u003e\u003c/p\u003e\u003cdiv id=\"alert\" style=\"font-family: titillium_regular, sans-serif; font-size: 18px; margin-bottom: 1.33333rem; color: rgb(255, 255, 255); background-color: rgb(62, 62, 62); --darkreader-inline-color:#f7f5f3; --darkreader-inline-bgcolor:#242729;\"\u003e\u003cdiv style=\"padding: 0px 1.33333rem 1.33333rem;\"\u003e\u003cdiv class=\"field-collection-container clearfix\"\u003e\u003cul class=\"list--ruled\" style=\"margin-right: 0px; margin-bottom: 0px; margin-left: 0px; padding: 0px;\"\u003e\u003cli style=\"list-style: none; margin-top: 0px; padding-top: 1.33333rem; border-top: 0px rgba(255, 255, 255, 0.2); --darkreader-inline-border-top:rgba(38, 40, 42, 0.2);\"\u003e\u003cdiv class=\"alert-title heading--bold\" style=\"font-family: latobold, sans-serif; margin-bottom: 0.33333rem;\"\u003eCompatibility Alert:\u003c/div\u003e\u003cdiv class=\"alert-content\"\u003e\u003cp\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003eThis extruder only supports 1.75 mm size filament.\u003c/span\u003e​\u003cbr\u003e\u003cbr\u003eThis tool head is currently compatible with LulzBot Mini 2, TAZ Workhorse and TAZ Pro 3D printers.\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003eTAZ 6 users can add this tool head with the \u003ca href=\"https://shop.lulzbot.com/lulzbot-taz-5-6-universal-tool-head-adapter-kt-cp0140?ref=KT-CP0140\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px; --darkreader-inline-color:#eefe8a; --darkreader-inline-bgimage: initial;\" target=\"_blank\"\u003eTAZ 6 Universal Tool Head Adapter\u003c/a\u003e.\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003eNote: M175 v1 has been discontinued. You can perform the upgrade to the M175 v2 with instructions here.\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003eNote: M175v1 has been discontinued. With that Mini 1 and TAZ 5 users that still own an M175v1 will be able to continue to use it.\u003cbr\u003e\u003cbr\u003eNote: Mini 1 users will need to \u003ca href=\"https://download.lulzbot.com/Mini/accessories/wiper_pad_models/\" target=\"_blank\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px; --darkreader-inline-color:#eefe8a; --darkreader-inline-bgimage: initial;\"\u003edownload and print a new wiper pad mount\u003c/a\u003e before installing the new M175 Tool Head.\u003c/p\u003e\u003c/div\u003e\u003c/li\u003e\u003cli style=\"margin-top: 1.33333rem; list-style: none; padding-top: 1.33333rem; border-top: 1px solid rgba(255, 255, 255, 0.2); --darkreader-inline-border-top:rgba(38, 40, 42, 0.2);\"\u003e\u003cdiv class=\"alert-title heading--bold\" style=\"font-family: latobold, sans-serif; margin-bottom: 0.33333rem;\"\u003e1.75 mm Filament Now Available!\u003c/div\u003e\u003cdiv class=\"alert-content\"\u003e\u003cp\u003eCheck out the variety of materials on the LulzBot website with pre-made profiles in LE Cura for the M175 v2 Tool Head:\u003c/p\u003e\u003cul style=\"margin-top: 1.55556rem; padding-left: 30px;\"\u003e\u003cli\u003e\u003ca href=\"https://shop.lulzbot.com/polymaker-polylite-pla-filament?ref=RM-PL0226\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px; --darkreader-inline-color:#eefe8a; --darkreader-inline-bgimage: initial;\" target=\"_blank\"\u003e1.75 mm PolyLite PLA by Polymaker  \u003c/a\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003ca href=\"https://shop.lulzbot.com/3d-fuel-standard-pla-filament?ref=RM-PL0175\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px; --darkreader-inline-color:#eefe8a; --darkreader-inline-bgimage: initial;\" target=\"_blank\"\u003e1.75 mm Standard PLA by 3D-Fuel\u003c/a\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003ca href=\"https://shop.lulzbot.com/3d-fuel-pro-pla-filament?ref=RM-PL0222\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px; --darkreader-inline-color:#eefe8a; --darkreader-inline-bgimage: initial;\" target=\"_blank\"\u003e1.75 mm Pro PLA by 3D-Fuel\u003c/a\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003ca href=\"https://shop.lulzbot.com/ic3d-abs-filament?ref=RM-AB0143\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px; --darkreader-inline-color:#eefe8a; --darkreader-inline-bgimage: initial;\" target=\"_blank\"\u003e1.75 mm ABS by IC3D\u003c/a\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003ca href=\"https://shop.lulzbot.com/ic3d-petg-filament?ref=RM-PE0017\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px; --darkreader-inline-color:#eefe8a; --darkreader-inline-bgimage: initial;\" target=\"_blank\"\u003e1.75 mm PETg by IC3D\u003c/a\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003ca href=\"https://shop.lulzbot.com/fenner-drives-ninjaflex-filament?ref=RM-TE0040\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px; --darkreader-inline-color:#eefe8a; --darkreader-inline-bgimage: initial;\" target=\"_blank\"\u003e1.75 mm NinjaFlex by NinjaTek\u003c/a\u003e\u003c/li\u003e\u003c/ul\u003e\u003c/div\u003e\u003c/li\u003e\u003c/ul\u003e\u003c/div\u003e\u003c/div\u003e\u003c/div\u003e\u003cp style=\"font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cbr\u003e\u003c/p\u003e","name":"M175 v2 Tool Head | 1.75 mm | Single Extruder | 0.5 mm","short_name":"","seo_title":"M175 v2 Tool Head | 1.75 mm | Single Extruder | 0.5 mm","meta_keywords":null,"meta_description":"Bring the world of 1.75mm material to your LulzBot Mini 2, TAZ Workhorse, and TAZ Pro!","variant_count":1,"categories":[{"id":11,"name":"Tool Heads","url_key":"store/tool-heads","level":0}],"sku":"KT-CP0175","variant_attributes":{},"price":{"value":375.0,"tax_included":false,"original_value":375.0,"discount":0.0},"hierarchicalCategories":[{"level":1,"value":"Tool Heads","ancestors":["All"],"order":3}],"filament_material":[],"compatibility":[{"name":"LulzBot Mini v2.0, Boxed for Retail, NA"},{"name":"LulzBot TAZ 3D Printer, Pro Boxed for Retail, NA"},{"name":"LulzBot TAZ 3D Printer, Workhorse, Boxed for Retail, NA"},{"name":"LulzBot TAZ SideKick 289 3D Printer, Boxed for Retail, NA"},{"name":"LulzBot TAZ SideKick 747 3D Printer, Boxed for Retail, NA"}],"description_parts_specification":"\u003ch4 style=\"font-size: 1.2rem; line-height: 1.25em; padding-bottom: 0.5rem; margin-bottom: 0px; border-bottom: 1px solid rgb(224, 224, 224); font-family: latobold, sans-serif; color: rgb(102, 102, 102); --darkreader-inline-border-bottom:#303335; --darkreader-inline-color:#aba59e;\"\u003eParts Included\u003c/h4\u003e\u003cp style=\"font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e(1) LulzBot M175 v2 Tool Head | 0.5 mm (Fully Assembled)\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eSpecifications\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eLayer Resolution: 0.05 mm - 0.5 mm (0.002 in - 0.020 in)\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eFilament Diameter: 1.75 mm\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eNozzle Diameter: 0.5 mm\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eNozzle: Slice Engineering® Bridgemaster™ nozzle\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eHot End Temperature Range: 120°C - 290°C (248°F - 554°F)\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eHot End Heatup Time: From 23°C to 210°C (73°F to 410°F) in 95 seconds\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eExtruder \u0026amp; Hot End: Bond Tech BMG, Slice Engineering® Mosquito Hotend®\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eRequired power system: 24 Volts\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eFans: (1) 5v 25 mm heat sink cooling fan, and (1)  24v centrifugal print cooling fan\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eWeight: 436.5 g (0.96 lbs)\u003c/p\u003e","description_resources_documentation":"\u003cp style=\"font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003ca href=\"https://gitlab.com/lulzbot3d/tool-heads/lutefisk\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px; --darkreader-inline-bgimage: initial; --darkreader-inline-color:#eefe8a;\"\u003eSource \u0026amp; Documentation\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003ca href=\"https://ohai.lulzbot.com/project/mount-adapter-installation-instructions-mini1\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px; --darkreader-inline-bgimage: initial; --darkreader-inline-color:#eefe8a;\"\u003eInstallation Instructions: LulzBot Mini 1\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003ca href=\"https://ohai.lulzbot.com/project/mount-adapter-installation-instructions-taz56\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px; --darkreader-inline-bgimage: initial; --darkreader-inline-color:#eefe8a;\"\u003eInstallation Instructions: LulzBot TAZ 6, 5\u003c/a\u003e\u003c/p\u003e","description_features":"\u003cp style=\"font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eThe 1.75 mm dual-drive extruder on the new LulzBot M175 v2 Tool Head feeds material reliably. Built to handle the toughest industrial-strength materials to the most basic materials, the M175 v2 prints a wide range of filament - from nylon and soft flexible materials to PLA and rigid and brittle carbon-filled high-strength materials. \u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eMaterial changes are easy using the quick release lever.  A thumbscrew tensioner allows the you to fine-tune the pressure exerted by the drive gears onto the filament. It provides uninterrupted material flow without fear of grinding or slipping. \u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eThe lightweight hot end provides superior heat break performance - it conducts 85% less heat than a standard threaded heat break. The small hot end mass allows for more rapid motion. \u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003ca href=\"https://www.lulzbot.com/sites/default/files/2020-07-23-m175-6.gif\" target=\"_blank\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px; --darkreader-inline-color:#eefe8a; --darkreader-inline-bgimage: initial;\"\u003e\u003cimg alt=\"M175 Airflow\" class=\"mobile_img\" src=\"https://www.lulzbot.com/sites/default/files/2020-07-23-m175-6.gif\" title=\"M175 Airflow\" style=\"border: 0px; max-width: 300px; height: auto; width: 300px; margin: 10px 15px 10px 0px; float: left; --darkreader-inline-border-top: initial; --darkreader-inline-border-right: initial; --darkreader-inline-border-bottom: initial; --darkreader-inline-border-left: initial;\"\u003e\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eThe M175 v2 Tool Head comes with a 0.5 mm Bridgemaster™ nozzle for beautiful, high-resolution prints.\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eThe sturdy fan duct mounts with one screw and has been designed for maximum efficiency using airflow analysis to ensure even 360° part cooling. The fan duct also provides a clear view of the printing surface so you can inspect layer quality during printing.\u003c/p\u003e","featured":true,"variant_selector":[],"stock":{"global":{"state":"in_stock"}},"brand":null,"images":[{"small":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_60_60-14213.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_300_300-14214.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_500_500-14215.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_60_60-14216.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_300_300-14217.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_500_500-14218.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_60_60-14219.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_300_300-14220.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_500_500-14221.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_60_60-14222.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_300_300-14223.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_500_500-14224.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_60_60-14225.png","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_300_300-14226.png","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_500_500-14227.png","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_60_60-14228.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_300_300-14229.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_500_500-14230.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_60_60-14231.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_300_300-14232.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_500_500-14233.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_60_60-14234.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_300_300-14235.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_500_500-14236.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_60_60-14237.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_300_300-14238.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_500_500-14239.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""}}],"slides_group":[],"variant_attributes_group":{},"id":353,"pack_ok":false,"used_in_pack":[],"index_name":"products"}
{"objectID":2772,"model":{"name":"M175 v2 Tool Head | 1.75 mm | Single Extruder | 0.5 mm"},"url_key":"store/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm-kt-cp0175","redirect_url_key":["lulzbot-m175-tool-head-single-extruder-kt-cp0175","lulzbot-m175-tool-head-single-extruder-0-5-mm-kt-cp0175","lulzbot-m175-v2-tool-head-single-extruder-0-5-mm-kt-cp0175","lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm-kt-cp0175"],"main":true,"short_description":"\u003cp\u003e\u003cspan style=\"font-family: titillium_regular, sans-serif; font-size: 18px;\"\u003eLulzBot honors your freedom to print.\u003c/span\u003e\u003cbr style=\"font-family: titillium_regular, sans-serif; font-size: 18px;\"\u003e\u003cspan style=\"font-family: titillium_regular, sans-serif; font-size: 18px;\"\u003eAdd 1.75 mm filament capability to your LulzBot 3D printer and open up an even wider variety of 3D printing materials.  The M175\u003c/span\u003e\u003cspan style=\"text-align: inherit; font-size: 18px;\"\u003e\u003cfont\u003e v2\u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_regular, sans-serif; font-size: 18px; color: rgb(0, 0, 0); font-style: inherit; font-variant-ligatures: inherit; font-variant-caps: inherit; font-weight: inherit; text-align: inherit;\"\u003e Tool Head is here to bring the world of 1.75 mm material to your LulzBot Mini 2, TAZ Workhorse, and TAZ Pro. \u003c/span\u003e\u003c/p\u003e","description":"\u003cp\u003e\u003ca href=\"https://www.lulzbot.com/store/tool-heads/m175-tool-head-175-mm-single-extruder-05-mm#\" class=\"toggle alert-toggle\" style=\"color: rgb(193, 214, 64); background: rgb(62, 62, 62); position: relative; display: block; padding: 0.66667rem 1rem; font-size: 0.8rem; line-height: 1.3125em; font-family: latobold, sans-serif; text-transform: uppercase; transition: color 0.3s ease-in-out 0s; margin-top: 20px; --darkreader-inline-color:#d3e081; --darkreader-inline-bgimage: initial; --darkreader-inline-bgcolor:#242729;\"\u003ePRODUCT ALERT \u003cspan class=\"alert-count\" style=\"font-family: latoregular, sans-serif;\"\u003e(2)\u003c/span\u003e\u003c/a\u003e\u003c/p\u003e\u003cdiv id=\"alert\" style=\"font-family: titillium_regular, sans-serif; font-size: 18px; margin-bottom: 1.33333rem; color: rgb(255, 255, 255); background-color: rgb(62, 62, 62); --darkreader-inline-color:#f7f5f3; --darkreader-inline-bgcolor:#242729;\"\u003e\u003cdiv style=\"padding: 0px 1.33333rem 1.33333rem;\"\u003e\u003cdiv class=\"field-collection-container clearfix\"\u003e\u003cul class=\"list--ruled\" style=\"margin-right: 0px; margin-bottom: 0px; margin-left: 0px; padding: 0px;\"\u003e\u003cli style=\"list-style: none; margin-top: 0px; padding-top: 1.33333rem; border-top: 0px rgba(255, 255, 255, 0.2); --darkreader-inline-border-top:rgba(38, 40, 42, 0.2);\"\u003e\u003cdiv class=\"alert-title heading--bold\" style=\"font-family: latobold, sans-serif; margin-bottom: 0.33333rem;\"\u003eCompatibility Alert:\u003c/div\u003e\u003cdiv class=\"alert-content\"\u003e\u003cp\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003eThis extruder only supports 1.75 mm size filament.\u003c/span\u003e​\u003cbr\u003e\u003cbr\u003eThis tool head is currently compatible with LulzBot Mini 2, TAZ Workhorse and TAZ Pro 3D printers.\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003eTAZ 6 users can add this tool head with the \u003ca href=\"https://shop.lulzbot.com/lulzbot-taz-5-6-universal-tool-head-adapter-kt-cp0140?ref=KT-CP0140\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px; --darkreader-inline-color:#eefe8a; --darkreader-inline-bgimage: initial;\" target=\"_blank\"\u003eTAZ 6 Universal Tool Head Adapter\u003c/a\u003e.\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003eNote: M175 v1 has been discontinued. You can perform the upgrade to the M175 v2 with instructions here.\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem;\"\u003eNote: M175v1 has been discontinued. With that Mini 1 and TAZ 5 users that still own an M175v1 will be able to continue to use it.\u003cbr\u003e\u003cbr\u003eNote: Mini 1 users will need to \u003ca href=\"https://download.lulzbot.com/Mini/accessories/wiper_pad_models/\" target=\"_blank\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px; --darkreader-inline-color:#eefe8a; --darkreader-inline-bgimage: initial;\"\u003edownload and print a new wiper pad mount\u003c/a\u003e before installing the new M175 Tool Head.\u003c/p\u003e\u003c/div\u003e\u003c/li\u003e\u003cli style=\"margin-top: 1.33333rem; list-style: none; padding-top: 1.33333rem; border-top: 1px solid rgba(255, 255, 255, 0.2); --darkreader-inline-border-top:rgba(38, 40, 42, 0.2);\"\u003e\u003cdiv class=\"alert-title heading--bold\" style=\"font-family: latobold, sans-serif; margin-bottom: 0.33333rem;\"\u003e1.75 mm Filament Now Available!\u003c/div\u003e\u003cdiv class=\"alert-content\"\u003e\u003cp\u003eCheck out the variety of materials on the LulzBot website with pre-made profiles in LE Cura for the M175 v2 Tool Head:\u003c/p\u003e\u003cul style=\"margin-top: 1.55556rem; padding-left: 30px;\"\u003e\u003cli\u003e\u003ca href=\"https://shop.lulzbot.com/polymaker-polylite-pla-filament?ref=RM-PL0226\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px; --darkreader-inline-color:#eefe8a; --darkreader-inline-bgimage: initial;\" target=\"_blank\"\u003e1.75 mm PolyLite PLA by Polymaker  \u003c/a\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003ca href=\"https://shop.lulzbot.com/3d-fuel-standard-pla-filament?ref=RM-PL0175\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px; --darkreader-inline-color:#eefe8a; --darkreader-inline-bgimage: initial;\" target=\"_blank\"\u003e1.75 mm Standard PLA by 3D-Fuel\u003c/a\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003ca href=\"https://shop.lulzbot.com/3d-fuel-pro-pla-filament?ref=RM-PL0222\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px; --darkreader-inline-color:#eefe8a; --darkreader-inline-bgimage: initial;\" target=\"_blank\"\u003e1.75 mm Pro PLA by 3D-Fuel\u003c/a\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003ca href=\"https://shop.lulzbot.com/ic3d-abs-filament?ref=RM-AB0143\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px; --darkreader-inline-color:#eefe8a; --darkreader-inline-bgimage: initial;\" target=\"_blank\"\u003e1.75 mm ABS by IC3D\u003c/a\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003ca href=\"https://shop.lulzbot.com/ic3d-petg-filament?ref=RM-PE0017\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px; --darkreader-inline-color:#eefe8a; --darkreader-inline-bgimage: initial;\" target=\"_blank\"\u003e1.75 mm PETg by IC3D\u003c/a\u003e\u003c/li\u003e\u003cli style=\"margin-top: 0.66667rem;\"\u003e\u003ca href=\"https://shop.lulzbot.com/fenner-drives-ninjaflex-filament?ref=RM-TE0040\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px; --darkreader-inline-color:#eefe8a; --darkreader-inline-bgimage: initial;\" target=\"_blank\"\u003e1.75 mm NinjaFlex by NinjaTek\u003c/a\u003e\u003c/li\u003e\u003c/ul\u003e\u003c/div\u003e\u003c/li\u003e\u003c/ul\u003e\u003c/div\u003e\u003c/div\u003e\u003c/div\u003e\u003cp style=\"font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cbr\u003e\u003c/p\u003e","name":"M175 v2 Tool Head | 1.75 mm | Single Extruder | 0.5 mm","short_name":"","seo_title":"M175 v2 Tool Head | 1.75 mm | Single Extruder | 0.5 mm","meta_keywords":null,"meta_description":"Bring the world of 1.75mm material to your LulzBot Mini 2, TAZ Workhorse, and TAZ Pro!","variant_count":1,"categories":[{"id":11,"name":"Tool Heads","url_key":"store/tool-heads","level":0}],"sku":"KT-CP0175","variant_attributes":{},"price":{"value":375.0,"tax_included":false,"original_value":375.0,"discount":0.0},"hierarchicalCategories":[{"level":1,"value":"Tool Heads","ancestors":["All"],"order":3}],"filament_material":[],"compatibility":[{"name":"LulzBot Mini v2.0, Boxed for Retail, NA"},{"name":"LulzBot TAZ 3D Printer, Pro Boxed for Retail, NA"},{"name":"LulzBot TAZ 3D Printer, Workhorse, Boxed for Retail, NA"},{"name":"LulzBot TAZ SideKick 289 3D Printer, Boxed for Retail, NA"},{"name":"LulzBot TAZ SideKick 747 3D Printer, Boxed for Retail, NA"}],"description_parts_specification":"\u003ch4 style=\"font-size: 1.2rem; line-height: 1.25em; padding-bottom: 0.5rem; margin-bottom: 0px; border-bottom: 1px solid rgb(224, 224, 224); font-family: latobold, sans-serif; color: rgb(102, 102, 102); --darkreader-inline-border-bottom:#303335; --darkreader-inline-color:#aba59e;\"\u003eParts Included\u003c/h4\u003e\u003cp style=\"font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e(1) LulzBot M175 v2 Tool Head | 0.5 mm (Fully Assembled)\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eSpecifications\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eLayer Resolution: 0.05 mm - 0.5 mm (0.002 in - 0.020 in)\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eFilament Diameter: 1.75 mm\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eNozzle Diameter: 0.5 mm\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eNozzle: Slice Engineering® Bridgemaster™ nozzle\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eHot End Temperature Range: 120°C - 290°C (248°F - 554°F)\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eHot End Heatup Time: From 23°C to 210°C (73°F to 410°F) in 95 seconds\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eExtruder \u0026amp; Hot End: Bond Tech BMG, Slice Engineering® Mosquito Hotend®\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eRequired power system: 24 Volts\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eFans: (1) 5v 25 mm heat sink cooling fan, and (1)  24v centrifugal print cooling fan\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eWeight: 436.5 g (0.96 lbs)\u003c/p\u003e","description_resources_documentation":"\u003cp style=\"font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003ca href=\"https://gitlab.com/lulzbot3d/tool-heads/lutefisk\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px; --darkreader-inline-bgimage: initial; --darkreader-inline-color:#eefe8a;\"\u003eSource \u0026amp; Documentation\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003ca href=\"https://ohai.lulzbot.com/project/mount-adapter-installation-instructions-mini1\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px; --darkreader-inline-bgimage: initial; --darkreader-inline-color:#eefe8a;\"\u003eInstallation Instructions: LulzBot Mini 1\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003ca href=\"https://ohai.lulzbot.com/project/mount-adapter-installation-instructions-taz56\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px; --darkreader-inline-bgimage: initial; --darkreader-inline-color:#eefe8a;\"\u003eInstallation Instructions: LulzBot TAZ 6, 5\u003c/a\u003e\u003c/p\u003e","description_features":"\u003cp style=\"font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eThe 1.75 mm dual-drive extruder on the new LulzBot M175 v2 Tool Head feeds material reliably. Built to handle the toughest industrial-strength materials to the most basic materials, the M175 v2 prints a wide range of filament - from nylon and soft flexible materials to PLA and rigid and brittle carbon-filled high-strength materials. \u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eMaterial changes are easy using the quick release lever.  A thumbscrew tensioner allows the you to fine-tune the pressure exerted by the drive gears onto the filament. It provides uninterrupted material flow without fear of grinding or slipping. \u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eThe lightweight hot end provides superior heat break performance - it conducts 85% less heat than a standard threaded heat break. The small hot end mass allows for more rapid motion. \u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003ca href=\"https://www.lulzbot.com/sites/default/files/2020-07-23-m175-6.gif\" target=\"_blank\" style=\"color: rgb(162, 186, 12); background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; margin-top: 20px; --darkreader-inline-color:#eefe8a; --darkreader-inline-bgimage: initial;\"\u003e\u003cimg alt=\"M175 Airflow\" class=\"mobile_img\" src=\"https://www.lulzbot.com/sites/default/files/2020-07-23-m175-6.gif\" title=\"M175 Airflow\" style=\"border: 0px; max-width: 300px; height: auto; width: 300px; margin: 10px 15px 10px 0px; float: left; --darkreader-inline-border-top: initial; --darkreader-inline-border-right: initial; --darkreader-inline-border-bottom: initial; --darkreader-inline-border-left: initial;\"\u003e\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eThe M175 v2 Tool Head comes with a 0.5 mm Bridgemaster™ nozzle for beautiful, high-resolution prints.\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003eThe sturdy fan duct mounts with one screw and has been designed for maximum efficiency using airflow analysis to ensure even 360° part cooling. The fan duct also provides a clear view of the printing surface so you can inspect layer quality during printing.\u003c/p\u003e","featured":true,"variant_selector":[],"stock":{"global":{"state":"in_stock"}},"brand":null,"images":[{"small":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_60_60-14213.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_300_300-14214.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_500_500-14215.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_60_60-14216.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_300_300-14217.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_500_500-14218.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_60_60-14219.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_300_300-14220.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_500_500-14221.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_60_60-14222.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_300_300-14223.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_500_500-14224.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_60_60-14225.png","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_300_300-14226.png","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_500_500-14227.png","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_60_60-14228.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_300_300-14229.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_500_500-14230.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_60_60-14231.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_300_300-14232.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_500_500-14233.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_60_60-14234.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_300_300-14235.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_500_500-14236.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_60_60-14237.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_300_300-14238.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-m175-v2-tool-head-carbide-coated-copper-0-5-mm_500_500-14239.jpg","alt":"LulzBot M175 v2 Tool Head | Carbide Coated Copper | 0.5 mm","tag":""}}],"slides_group":[],"variant_attributes_group":{},"id":353,"pack_ok":false,"used_in_pack":[],"index_name":"products"}
.
A notice about cookies

This website uses cookies. By continuing to browse this site, you agree to their use.

See all options