Loading...

LulzBot TAZ Dual Extruder V3.1 Tool Head

The re-engineered LulzBot TAZ Dual Extruder v3.1 Tool Head is back by popular demand to take your designs to the next level.  Improved air flow at the heat sink means this trusty Tool Head is now even more prepared to utilize dedicated support material like PolyDissolve S1, that dissolves and separates in water, freeing you to focus on the function of your design rather than on how to make it 3D printable.  

This dual filament extruder does not require nozzle leveling or offset calibration, is lighter and more compact than its predecessor, and features improved heat sink and part cooling. With hassle-free hardware, integrated software, and water-soluble support material, who knew geometric freedom could be this easy?

[Watch The Video]


*01/31/2022 the stock heater cartridge is now 24V 40W

*Before purchasing contact support for machine specific compatibility

Read more
Compatibility:
LulzBot TAZ 3D Printer, v6.0 Boxed for Retail, NA

The popular LulzBot TAZ Dual Extruder v3.1 was re-engineered with a focus on improving air flow at the heat sink for greater efficiency when printing. The Dual Extruder v3.1 enables 3D printing complex geometry that would normally require time spent removing same-material supports with a risk of breaking your print and almost always leaving evidence of the support in imperfect bottom surfaces. With water-soluble supports like PVA, let the water do the work and enjoy clean and accurate bottom surfaces.

The Dual Extruder v3.1 features a unibody heatsink and redsigned fan mount with two hot ends co-developed with E3D, makers of the ever popular line of all-metal hot ends. The precision-machined design brings the hot ends closer together, resulting in a dual extruder with no need for nozzle leveling or offset calibration. Just install the tool head and accessories, quickly flash firmware with Cura LulzBot Edition, and start printing. 

The Dual Extruder v3.1 comes with everything you need to install on your LulzBot TAZ 5/6, including an extra wide wiper pad mount that enables your Dual Extruder v3.1 to work flawlessly with LulzBot self-cleaning and self-leveling technology. 

 

The Dual Extruder v3.1 was specifically designed for 3D printing models with soluble support material, which is the primary reason LulzBot users want dual extrusionSoluble support allows freedom of design which means better rapid prototypes and better efficiencyWe have had many questions about the v3.1’s ability to do other kinds of dual extrusion printing:

Question 1: Can the LulzBot TAZ Dual Extruder v3.1 Tool Head print in two colors of the same material?

Answer: Yes, absolutely, however the print profiles built into Cura LulzBot Edition have not been optimized for multicolor printing. If multicolor printing is your goal, you may need to make modifications to the included profiles for optimal results. We have included all LulzBot supported material base profiles under the Experimental classification in Materials as a good starting point.

Question 2: Can the LulzBot TAZ Dual Extruder v3.1 Tool Head print flexible materials?

Answer: Yes, the Dual Extruder v3.1 is capable of printing flexible materials. Through our internal testing, we have found that PolyDissolve S1 and PVA stick very well to TPU’s (flexible filaments), but the profiles have not yet been fine-tuned for optimal cosmetic results. Because of this, all of our flexible material profiles have been included in the Experimental section of Cura LulzBot Edition as a starting point for making your own modifications. Printing with flexible materials is recommended for advanced users on the Dual Extruder v3.1.

Question 3: Can the LulzBot TAZ Dual Extruder v3.1 Tool Head print solid and flexible materials together?

Answer: Yes, the hardware of the Dual Extruder v3.1 is capable of printing solid and flexible material together, but the profiles have not been optimized for reliability or cosmetic results. Because of this, all of our flexible and solid material profiles are included in the Experimental section of Cura LulzBot Edition Materials, and can be used as a good starting point for making your own modifications. Printing with flexible and solid materials is recommended for advanced users on the Dual Extruder v3.1.

Parts Included

(1) LulzBot TAZ Dual Extruder Tool Head v3.1 (Fully Assembled)

(1) 3D Printed Z-axis endstop extension mount (for TAZ 6)

(1) Machined Z-axis endstop extension (for TAZ 6)

Note: The Z-axis Toggle Extension and Mount should only be used on a TAZ 6 with the Dual Extruder v3.1 Tool Head. Leaving this extension on the printer and using it with other tool heads will cause failed probes due to the higher registered minimum position.

(1) Dual v3 wiper mount

(1) Additional spool arm

(1) Feed tube spinner

(1) T-nut holder jig

(1) Idler jig

(4) Wire tie 

(1) Extruder wiring harness for second extruder

(1) M5 washer (Black)

(1) M5 x 14 mm socket head cap screw

(1) Filament Feed tube


Specifications

Required filament diameter: 2.85mm diameter

Hot end temperature range: 120°C - 300°C

Nozzle diameters: 0.5mm

Required power system: 24 Volts

Fans: Two 24v 40mm axial fans for extrusion cooling, one 5v 40mm axial fan for heat-sink cooling

Weight: 0.96 kg (2.11 lbs)

Heater Cartridge: 24V 40W

$ 495 00
495.0
{"objectID":3801,"model":{"name":"LulzBot TAZ Dual Extruder V3.1 Tool Head"},"url_key":"store/lulzbot-taz-dual-extruder-v3-1-tool-head-kt-cp0162","redirect_url_key":["lulzbot-taz-dual-extruder-v3-1-tool-head-kt-cp0162"],"main":true,"short_description":"\u003cp style=\"margin-bottom: 0.1in; line-height: 21.6px; font-family: titillium_regular, sans-serif; font-size: 18px;\"\u003eThe re-engineered LulzBot TAZ Dual Extruder v3.1 Tool Head is back by popular demand to take your designs to the next level.  Improved air flow at the heat sink means this trusty Tool Head is now even more prepared to utilize dedicated support material like \u003ca href=\"https://shop.lulzbot.com/polymaker-polydissolve-filament-rm-pv0008?ref=RM-PV0008\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003ePolyDissolve S1\u003c/a\u003e, that dissolves and separates in water, freeing you to focus on the function of your design rather than on how to make it 3D printable.  \u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 21.6px; font-family: titillium_regular, sans-serif; font-size: 18px;\"\u003eThis dual filament extruder does not require nozzle leveling or offset calibration, is lighter and more compact than its predecessor, and features improved heat sink and part cooling. With hassle-free hardware, integrated software, and water-soluble support material, who knew geometric freedom could be this easy?\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 21.6px; font-family: titillium_regular, sans-serif; font-size: 18px;\"\u003e[\u003ca href=\"https://www.lulzbot.com/store/tool-heads/lulzbot-taz-dual-extruder-v3-tool-head#video\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003eWatch The Video\u003c/a\u003e]\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 21.6px; font-family: titillium_regular, sans-serif; font-size: 18px;\"\u003e\u003cbr\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 21.6px; font-family: titillium_regular, sans-serif; font-size: 18px;\"\u003e*01/31/2022 the stock heater cartridge is now 24V 40W\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 21.6px; font-family: titillium_regular, sans-serif; font-size: 18px;\"\u003e*Before purchasing contact support for machine specific compatibility\u003c/p\u003e","description":"\u003cp\u003e\u003ca href=\"https://shop.lulzbot.com/lulzbot-taz-dual-extruder-v3-tool-head-kt-cp0127?ref=KT-CP0127\" class=\"title lato bold lh-22\" style=\"color: rgb(52, 58, 64); text-decoration-line: underline; background-color: rgb(255, 255, 255); font-family: f_t_bold; line-height: 22px; display: block; min-height: 50px; font-size: 18px; font-weight: 700 !important;\"\u003e\u003c/a\u003e\u003ca href=\"https://shop.lulzbot.com/lulzbot-taz-dual-extruder-v3-tool-head-kt-cp0127?ref=KT-CP0127\" class=\"bold lato lh-22 title\" style=\"color: rgb(52, 58, 64); background-color: rgb(255, 255, 255); line-height: 22px; display: block; min-height: 50px;\"\u003e\u003c/a\u003e\u003ca href=\"https://www.lulzbot.com/store/tool-heads/lulzbot-taz-dual-extruder-v3-tool-head#\" class=\"toggle alert-toggle\" style=\"background: rgb(62, 62, 62); color: rgb(193, 214, 64); position: relative; display: block; padding: 0.66667rem 1rem; font-size: 0.8rem; line-height: 1.3125em; font-family: latobold, sans-serif; text-transform: uppercase; transition: color 0.3s ease-in-out 0s; margin-top: 20px; font-weight: 400;\"\u003ePRODUCT ALERT \u003cspan class=\"alert-count\" style=\"font-family: latoregular, sans-serif;\"\u003e(2)\u003c/span\u003e\u003c/a\u003e\u003c/p\u003e\u003cdiv id=\"alert\" style=\"margin-bottom: 1.33333rem; color: rgb(255, 255, 255); background-color: rgb(62, 62, 62); font-family: titillium_regular, sans-serif; font-size: 18px;\"\u003e\u003cdiv style=\"padding: 0px 1.33333rem 1.33333rem;\"\u003e\u003cdiv class=\"field-collection-container clearfix\"\u003e\u003cul class=\"list--ruled\" style=\"margin-right: 0px; margin-bottom: 0px; margin-left: 0px; padding: 0px;\"\u003e\u003cli style=\"list-style: none; margin-top: 0px; padding-top: 1.33333rem; border-top: 0px rgba(255, 255, 255, 0.2);\"\u003e\u003cdiv class=\"alert-title heading--bold\" style=\"font-family: latobold, sans-serif; margin-bottom: 0.33333rem;\"\u003eUpgrading a LulzBot TAZ 5?\u003c/div\u003e\u003cdiv class=\"alert-content\"\u003e\u003cp style=\"margin-bottom: 0.1in; line-height: 21.6px;\"\u003eEarly LulzBot TAZ 5 3D Printer users may need to upgrade their v2a/v2b tool head harness to the \u003ca href=\"https://shop.lulzbot.com/taz-v2c-tool-head-wiring-harness-kt-el0060?ref=KT-EL0060\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(120, 138, 9); outline: 0px; margin-top: 20px;\"\u003eLulzBot TAZ 5 v2c Tool Head Harness\u003c/a\u003e.\u003c/p\u003e\u003c/div\u003e\u003c/li\u003e\u003cli style=\"margin-top: 1.33333rem; list-style: none; padding-top: 1.33333rem; border-top: 1px solid rgba(255, 255, 255, 0.2);\"\u003e\u003cdiv class=\"alert-title heading--bold\" style=\"font-family: latobold, sans-serif; margin-bottom: 0.33333rem;\"\u003eUpgrading an existing Dual Extruder v3 to v3.1\u003c/div\u003e\u003cdiv class=\"alert-content\"\u003e\u003cp style=\"margin-bottom: 0.1in; line-height: 21.6px;\"\u003eDo you own a LulzBot Dual Extruder v3 and want to upgrade your existing tool head to v3.1?\u003cbr\u003e\u003cbr\u003eFind the conversion kit here:\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https://shop.lulzbot.com/dual-v3-to-v3-1-hardware-conversion-kit-kt-hd0023?ref=KT-HD0023\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003eDual Extruder v3.1 Conversion Kit\u003c/a\u003e\u003cbr\u003e\u003cbr\u003eAnd follow these simple \u003ca href=\"https://ohai.lulzbot.com/project/dual-extruder-v3-heat-creep-update/hot-end-tool-head-assembly/\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003eSet-Up Instructions\u003c/a\u003e.\u003c/p\u003e\u003c/div\u003e\u003c/li\u003e\u003c/ul\u003e\u003c/div\u003e\u003c/div\u003e\u003c/div\u003e","name":"LulzBot TAZ Dual Extruder V3.1 Tool Head","short_name":"","seo_title":"LulzBot TAZ Dual Extruder V3.1 Tool Head | LulzBot Industrial High Strength 3D Printing","meta_keywords":null,"meta_description":"By popular demand the TAZ Dual Extruder is back in it's v3.1 revision! With improved heat sink and part cooling to make printing that much more reliable!","variant_count":1,"categories":[{"id":11,"name":"Tool Heads","url_key":"store/tool-heads","level":0}],"sku":"KT-CP0162","variant_attributes":{},"price":{"value":495.0,"tax_included":false,"original_value":495.0,"discount":0.0},"hierarchicalCategories":[{"level":1,"value":"Tool Heads","ancestors":["All"],"order":3}],"filament_material":[],"compatibility":[{"name":"LulzBot TAZ 3D Printer, v6.0 Boxed for Retail, NA"}],"description_parts_specification":"\u003ch2\u003eParts Included\u003c/h2\u003e\u003cp style=\"margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e(1) LulzBot TAZ Dual Extruder Tool Head v3.1 (Fully Assembled)\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e(1) 3D Printed Z-axis endstop extension mount (for TAZ 6)\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e(1) Machined Z-axis endstop extension (for TAZ 6)\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eNote: The Z-axis Toggle Extension and Mount should only be used on a TAZ 6 with the Dual Extruder v3.1 Tool Head. Leaving this extension on the printer and using it with other tool heads will cause failed probes due to the higher registered minimum position.\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e(1) Dual v3 wiper mount\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e(1) Additional spool arm\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e(1) Feed tube spinner\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e(1) T-nut holder jig\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e(1) Idler jig\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e(4) Wire tie \u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e(1) Extruder wiring harness for second extruder\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e(1) M5 washer (Black)\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e(1) M5 x 14 mm socket head cap screw\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e(1) Filament Feed tube\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cbr\u003e\u003c/p\u003e\u003ch2\u003eSpecifications\u003c/h2\u003e\u003cp style=\"margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eRequired filament diameter: 2.85mm diameter\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eHot end temperature range: 120°C - 300°C\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eNozzle diameters: 0.5mm\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eRequired power system: 24 Volts\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eFans: Two 24v 40mm axial fans for extrusion cooling, one 5v 40mm axial fan for heat-sink cooling\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eWeight: 0.96 kg (2.11 lbs)\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eHeater Cartridge: 24V 40W\u003c/font\u003e\u003c/p\u003e","description_resources_documentation":"\u003ch2\u003eMore Information\u003c/h2\u003e\u003cp style=\"margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003ca href=\"https://ohai.lulzbot.com/project/lulzbot-taz-dual-extruder-tool-head-v3-install\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eInstallation Instructions LulzBot TAZ 6\u003c/font\u003e\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003ca href=\"https://ohai.lulzbot.com/workflow/LulzBot-TAZ-5-Dual-Extruder-v3-Install/accessories/\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eInstallation Instructions LulzBot TAZ 5\u003c/font\u003e\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003ca href=\"https://gitlab.com/lulzbot3d/tool-heads/yellowfin\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eSource and Bill of Materials\u003c/font\u003e\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e \u003c/p\u003e\u003ch2\u003e3D Model Attribution\u003c/h2\u003e\u003cp style=\"margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003ca href=\"https://download.lulzbot.com/3D_Models/Razor/\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eRazor\u003c/font\u003e\u003c/a\u003e\u003cfont style=\"font-size: 14px;\"\u003e is used under the \u003c/font\u003e\u003ca href=\"https://creativecommons.org/licenses/by-sa/4.0/\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eCreative Commons - Attribution - Share Alike license\u003c/font\u003e\u003c/a\u003e\u003cfont style=\"font-size: 14px;\"\u003e.\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003ca href=\"https://devel.lulzbot.com/3d_models/Impossible_Gear/\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eImpossible Gear\u003c/font\u003e\u003c/a\u003e\u003cfont style=\"font-size: 14px;\"\u003e is used under the \u003c/font\u003e\u003ca href=\"https://creativecommons.org/licenses/by-sa/4.0/\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eCreative Commons - Attribution - Share Alike license\u003c/font\u003e\u003c/a\u003e\u003cfont style=\"font-size: 14px;\"\u003e.\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003ca href=\"https://www.thingiverse.com/thing:367268\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eHumerus_Right Human Skeleton Upper Arm Bone by profguy\u003c/font\u003e\u003c/a\u003e\u003cfont style=\"font-size: 14px;\"\u003e is used under the \u003c/font\u003e\u003ca href=\"https://creativecommons.org/licenses/by-sa/4.0/\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eCreative Commons - Attribution - Share Alike license\u003c/font\u003e\u003c/a\u003e\u003cfont style=\"font-size: 14px;\"\u003e.\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003ca href=\"https://www.thingiverse.com/thing:115799\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eEngine by Marin\u003c/font\u003e\u003c/a\u003e\u003cfont style=\"font-size: 14px;\"\u003e is used under the \u003c/font\u003e\u003ca href=\"https://creativecommons.org/licenses/by-sa/4.0/\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eCreative Commons - Attribution - Share Alike license\u003c/font\u003e\u003c/a\u003e\u003cfont style=\"font-size: 14px;\"\u003e.\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003ca href=\"https://www.thingiverse.com/thing:34004\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eScapula (Anatomical Bone) by Bror \u003c/font\u003e\u003c/a\u003e\u003cfont style=\"font-size: 14px;\"\u003eis used under the \u003c/font\u003e\u003ca href=\"https://creativecommons.org/licenses/by-sa/4.0/\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eCreative Commons - Attribution - Share Alike license\u003c/font\u003e\u003c/a\u003e\u003cfont style=\"font-size: 14px;\"\u003e.\u003c/font\u003e\u003c/p\u003e","description_features":"\u003cp style=\"margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eThe popular LulzBot TAZ Dual Extruder v3.1 was re-engineered with a focus on improving air flow at the heat sink for greater efficiency when printing.\u003c/font\u003e\u003c/span\u003e\u003cfont style=\"font-size: 14px;\"\u003e The Dual Extruder v3.1 enables 3D printing complex geometry that would normally require time spent removing same-material supports with a risk of breaking your print and almost always leaving evidence of the support in imperfect bottom surfaces. With water-soluble supports like PVA, let the water do the work and enjoy clean and accurate bottom surfaces.\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eThe Dual Extruder v3.1 features a unibody heatsink and redsigned fan mount with two hot ends co-developed with E3D, makers of the ever popular line of all-metal hot ends. The precision-machined design brings the hot ends closer together, resulting in a dual extruder with no need for nozzle leveling or offset calibration. Just install the tool head and accessories, quickly flash firmware with Cura LulzBot Edition, and start printing. \u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eThe Dual Extruder v3.1 comes with everything you need to install on your LulzBot TAZ 5/6, including an extra wide wiper pad mount that enables your Dual Extruder v3.1 to work flawlessly with LulzBot self-cleaning and self-leveling technology. \u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e \u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003c/p\u003e\u003cp style=\"margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eT\u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003ehe Dual Extruder \u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003ev3.1\u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e was specifically designed for \u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e3D\u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e print\u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eing models with soluble\u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e support material, \u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003ewhich is the primary reason LulzBot users want dual extrusion\u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e. \u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eSoluble support \u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eallows freedom of design \u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003ewhich means \u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003ebetter rapid prototyp\u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003ees\u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e \u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eand better efficiency\u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e. \u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eWe have had many questions about the v3.1’s ability to do other kinds of dual extrusion printing:\u003c/font\u003e\u003c/span\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eQuestion 1:\u003c/font\u003e\u003c/span\u003e\u003cfont style=\"font-size: 14px;\"\u003e Can the LulzBot TAZ Dual Extruder v3.1 Tool Head print in two colors of the same material?\u003c/font\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eAnswer:\u003c/font\u003e\u003c/span\u003e\u003cfont style=\"font-size: 14px;\"\u003e Yes, absolutely, however the print profiles built into Cura LulzBot Edition have not been optimized for multicolor printing. If multicolor printing is your goal, you may need to make modifications to the included profiles for optimal results. We have included all LulzBot supported material base profiles under the Experimental classification in Materials as a good starting point.\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eQuestion 2:\u003c/font\u003e\u003c/span\u003e\u003cfont style=\"font-size: 14px;\"\u003e Can the LulzBot TAZ Dual Extruder v3.1 Tool Head print flexible materials?\u003c/font\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eAnswer:\u003c/font\u003e\u003c/span\u003e\u003cfont style=\"font-size: 14px;\"\u003e Yes, the Dual Extruder v3.1 is capable of printing flexible materials. Through our internal testing, we have found that PolyDissolve S1 and PVA stick very well to TPU’s (flexible filaments), but the profiles have not yet been fine-tuned for optimal cosmetic results. Because of this, all of our flexible material profiles have been included in the Experimental section of Cura LulzBot Edition as a starting point for making your own modifications. Printing with flexible materials is recommended for advanced users on the Dual Extruder v3.1.\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eQuestion 3:\u003c/font\u003e\u003c/span\u003e\u003cfont style=\"font-size: 14px;\"\u003e Can the LulzBot TAZ Dual Extruder v3.1 Tool Head print solid and flexible materials together?\u003c/font\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eAnswer:\u003c/font\u003e\u003c/span\u003e\u003cfont style=\"font-size: 14px;\"\u003e Yes, the hardware of the Dual Extruder v3.1 is capable of printing solid and flexible material together, but the profiles have not been optimized for reliability or cosmetic results. Because of this, all of our flexible and solid material profiles are included in the Experimental section of Cura LulzBot Edition Materials, and can be used as a good starting point for making your own modifications. Printing with flexible and solid materials is recommended for advanced users on the Dual Extruder v3.1.\u003c/font\u003e\u003c/p\u003e","featured":false,"variant_selector":[],"stock":{"global":{"state":"in_stock"}},"brand":null,"images":[{"small":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_60_60-7562.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_300_300-7563.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_500_500-7564.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_60_60-7565.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_300_300-7566.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_500_500-7567.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_60_60-7568.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_300_300-7569.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_500_500-7570.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_60_60-7571.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_300_300-7572.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_500_500-7573.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_60_60-7574.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_300_300-7575.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_500_500-7576.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""}}],"slides_group":[],"variant_attributes_group":{},"id":715,"pack_ok":false,"used_in_pack":[],"index_name":"products"}
Overview

PRODUCT ALERT (2)

LulzBot TAZ Dual Extruder V3.1 Tool Head

LulzBot TAZ Dual Extruder V3.1 Tool Head


$ 495 00
495.0

{"objectID":3801,"model":{"name":"LulzBot TAZ Dual Extruder V3.1 Tool Head"},"url_key":"store/lulzbot-taz-dual-extruder-v3-1-tool-head-kt-cp0162","redirect_url_key":["lulzbot-taz-dual-extruder-v3-1-tool-head-kt-cp0162"],"main":true,"short_description":"\u003cp style=\"margin-bottom: 0.1in; line-height: 21.6px; font-family: titillium_regular, sans-serif; font-size: 18px;\"\u003eThe re-engineered LulzBot TAZ Dual Extruder v3.1 Tool Head is back by popular demand to take your designs to the next level.  Improved air flow at the heat sink means this trusty Tool Head is now even more prepared to utilize dedicated support material like \u003ca href=\"https://shop.lulzbot.com/polymaker-polydissolve-filament-rm-pv0008?ref=RM-PV0008\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003ePolyDissolve S1\u003c/a\u003e, that dissolves and separates in water, freeing you to focus on the function of your design rather than on how to make it 3D printable.  \u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 21.6px; font-family: titillium_regular, sans-serif; font-size: 18px;\"\u003eThis dual filament extruder does not require nozzle leveling or offset calibration, is lighter and more compact than its predecessor, and features improved heat sink and part cooling. With hassle-free hardware, integrated software, and water-soluble support material, who knew geometric freedom could be this easy?\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 21.6px; font-family: titillium_regular, sans-serif; font-size: 18px;\"\u003e[\u003ca href=\"https://www.lulzbot.com/store/tool-heads/lulzbot-taz-dual-extruder-v3-tool-head#video\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003eWatch The Video\u003c/a\u003e]\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 21.6px; font-family: titillium_regular, sans-serif; font-size: 18px;\"\u003e\u003cbr\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 21.6px; font-family: titillium_regular, sans-serif; font-size: 18px;\"\u003e*01/31/2022 the stock heater cartridge is now 24V 40W\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 21.6px; font-family: titillium_regular, sans-serif; font-size: 18px;\"\u003e*Before purchasing contact support for machine specific compatibility\u003c/p\u003e","description":"\u003cp\u003e\u003ca href=\"https://shop.lulzbot.com/lulzbot-taz-dual-extruder-v3-tool-head-kt-cp0127?ref=KT-CP0127\" class=\"title lato bold lh-22\" style=\"color: rgb(52, 58, 64); text-decoration-line: underline; background-color: rgb(255, 255, 255); font-family: f_t_bold; line-height: 22px; display: block; min-height: 50px; font-size: 18px; font-weight: 700 !important;\"\u003e\u003c/a\u003e\u003ca href=\"https://shop.lulzbot.com/lulzbot-taz-dual-extruder-v3-tool-head-kt-cp0127?ref=KT-CP0127\" class=\"bold lato lh-22 title\" style=\"color: rgb(52, 58, 64); background-color: rgb(255, 255, 255); line-height: 22px; display: block; min-height: 50px;\"\u003e\u003c/a\u003e\u003ca href=\"https://www.lulzbot.com/store/tool-heads/lulzbot-taz-dual-extruder-v3-tool-head#\" class=\"toggle alert-toggle\" style=\"background: rgb(62, 62, 62); color: rgb(193, 214, 64); position: relative; display: block; padding: 0.66667rem 1rem; font-size: 0.8rem; line-height: 1.3125em; font-family: latobold, sans-serif; text-transform: uppercase; transition: color 0.3s ease-in-out 0s; margin-top: 20px; font-weight: 400;\"\u003ePRODUCT ALERT \u003cspan class=\"alert-count\" style=\"font-family: latoregular, sans-serif;\"\u003e(2)\u003c/span\u003e\u003c/a\u003e\u003c/p\u003e\u003cdiv id=\"alert\" style=\"margin-bottom: 1.33333rem; color: rgb(255, 255, 255); background-color: rgb(62, 62, 62); font-family: titillium_regular, sans-serif; font-size: 18px;\"\u003e\u003cdiv style=\"padding: 0px 1.33333rem 1.33333rem;\"\u003e\u003cdiv class=\"field-collection-container clearfix\"\u003e\u003cul class=\"list--ruled\" style=\"margin-right: 0px; margin-bottom: 0px; margin-left: 0px; padding: 0px;\"\u003e\u003cli style=\"list-style: none; margin-top: 0px; padding-top: 1.33333rem; border-top: 0px rgba(255, 255, 255, 0.2);\"\u003e\u003cdiv class=\"alert-title heading--bold\" style=\"font-family: latobold, sans-serif; margin-bottom: 0.33333rem;\"\u003eUpgrading a LulzBot TAZ 5?\u003c/div\u003e\u003cdiv class=\"alert-content\"\u003e\u003cp style=\"margin-bottom: 0.1in; line-height: 21.6px;\"\u003eEarly LulzBot TAZ 5 3D Printer users may need to upgrade their v2a/v2b tool head harness to the \u003ca href=\"https://shop.lulzbot.com/taz-v2c-tool-head-wiring-harness-kt-el0060?ref=KT-EL0060\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(120, 138, 9); outline: 0px; margin-top: 20px;\"\u003eLulzBot TAZ 5 v2c Tool Head Harness\u003c/a\u003e.\u003c/p\u003e\u003c/div\u003e\u003c/li\u003e\u003cli style=\"margin-top: 1.33333rem; list-style: none; padding-top: 1.33333rem; border-top: 1px solid rgba(255, 255, 255, 0.2);\"\u003e\u003cdiv class=\"alert-title heading--bold\" style=\"font-family: latobold, sans-serif; margin-bottom: 0.33333rem;\"\u003eUpgrading an existing Dual Extruder v3 to v3.1\u003c/div\u003e\u003cdiv class=\"alert-content\"\u003e\u003cp style=\"margin-bottom: 0.1in; line-height: 21.6px;\"\u003eDo you own a LulzBot Dual Extruder v3 and want to upgrade your existing tool head to v3.1?\u003cbr\u003e\u003cbr\u003eFind the conversion kit here:\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https://shop.lulzbot.com/dual-v3-to-v3-1-hardware-conversion-kit-kt-hd0023?ref=KT-HD0023\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003eDual Extruder v3.1 Conversion Kit\u003c/a\u003e\u003cbr\u003e\u003cbr\u003eAnd follow these simple \u003ca href=\"https://ohai.lulzbot.com/project/dual-extruder-v3-heat-creep-update/hot-end-tool-head-assembly/\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003eSet-Up Instructions\u003c/a\u003e.\u003c/p\u003e\u003c/div\u003e\u003c/li\u003e\u003c/ul\u003e\u003c/div\u003e\u003c/div\u003e\u003c/div\u003e","name":"LulzBot TAZ Dual Extruder V3.1 Tool Head","short_name":"","seo_title":"LulzBot TAZ Dual Extruder V3.1 Tool Head | LulzBot Industrial High Strength 3D Printing","meta_keywords":null,"meta_description":"By popular demand the TAZ Dual Extruder is back in it's v3.1 revision! With improved heat sink and part cooling to make printing that much more reliable!","variant_count":1,"categories":[{"id":11,"name":"Tool Heads","url_key":"store/tool-heads","level":0}],"sku":"KT-CP0162","variant_attributes":{},"price":{"value":495.0,"tax_included":false,"original_value":495.0,"discount":0.0},"hierarchicalCategories":[{"level":1,"value":"Tool Heads","ancestors":["All"],"order":3}],"filament_material":[],"compatibility":[{"name":"LulzBot TAZ 3D Printer, v6.0 Boxed for Retail, NA"}],"description_parts_specification":"\u003ch2\u003eParts Included\u003c/h2\u003e\u003cp style=\"margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e(1) LulzBot TAZ Dual Extruder Tool Head v3.1 (Fully Assembled)\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e(1) 3D Printed Z-axis endstop extension mount (for TAZ 6)\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e(1) Machined Z-axis endstop extension (for TAZ 6)\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eNote: The Z-axis Toggle Extension and Mount should only be used on a TAZ 6 with the Dual Extruder v3.1 Tool Head. Leaving this extension on the printer and using it with other tool heads will cause failed probes due to the higher registered minimum position.\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e(1) Dual v3 wiper mount\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e(1) Additional spool arm\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e(1) Feed tube spinner\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e(1) T-nut holder jig\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e(1) Idler jig\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e(4) Wire tie \u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e(1) Extruder wiring harness for second extruder\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e(1) M5 washer (Black)\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e(1) M5 x 14 mm socket head cap screw\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e(1) Filament Feed tube\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cbr\u003e\u003c/p\u003e\u003ch2\u003eSpecifications\u003c/h2\u003e\u003cp style=\"margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eRequired filament diameter: 2.85mm diameter\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eHot end temperature range: 120°C - 300°C\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eNozzle diameters: 0.5mm\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eRequired power system: 24 Volts\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eFans: Two 24v 40mm axial fans for extrusion cooling, one 5v 40mm axial fan for heat-sink cooling\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eWeight: 0.96 kg (2.11 lbs)\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eHeater Cartridge: 24V 40W\u003c/font\u003e\u003c/p\u003e","description_resources_documentation":"\u003ch2\u003eMore Information\u003c/h2\u003e\u003cp style=\"margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003ca href=\"https://ohai.lulzbot.com/project/lulzbot-taz-dual-extruder-tool-head-v3-install\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eInstallation Instructions LulzBot TAZ 6\u003c/font\u003e\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003ca href=\"https://ohai.lulzbot.com/workflow/LulzBot-TAZ-5-Dual-Extruder-v3-Install/accessories/\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eInstallation Instructions LulzBot TAZ 5\u003c/font\u003e\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003ca href=\"https://gitlab.com/lulzbot3d/tool-heads/yellowfin\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eSource and Bill of Materials\u003c/font\u003e\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e \u003c/p\u003e\u003ch2\u003e3D Model Attribution\u003c/h2\u003e\u003cp style=\"margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003ca href=\"https://download.lulzbot.com/3D_Models/Razor/\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eRazor\u003c/font\u003e\u003c/a\u003e\u003cfont style=\"font-size: 14px;\"\u003e is used under the \u003c/font\u003e\u003ca href=\"https://creativecommons.org/licenses/by-sa/4.0/\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eCreative Commons - Attribution - Share Alike license\u003c/font\u003e\u003c/a\u003e\u003cfont style=\"font-size: 14px;\"\u003e.\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003ca href=\"https://devel.lulzbot.com/3d_models/Impossible_Gear/\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eImpossible Gear\u003c/font\u003e\u003c/a\u003e\u003cfont style=\"font-size: 14px;\"\u003e is used under the \u003c/font\u003e\u003ca href=\"https://creativecommons.org/licenses/by-sa/4.0/\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eCreative Commons - Attribution - Share Alike license\u003c/font\u003e\u003c/a\u003e\u003cfont style=\"font-size: 14px;\"\u003e.\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003ca href=\"https://www.thingiverse.com/thing:367268\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eHumerus_Right Human Skeleton Upper Arm Bone by profguy\u003c/font\u003e\u003c/a\u003e\u003cfont style=\"font-size: 14px;\"\u003e is used under the \u003c/font\u003e\u003ca href=\"https://creativecommons.org/licenses/by-sa/4.0/\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eCreative Commons - Attribution - Share Alike license\u003c/font\u003e\u003c/a\u003e\u003cfont style=\"font-size: 14px;\"\u003e.\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003ca href=\"https://www.thingiverse.com/thing:115799\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eEngine by Marin\u003c/font\u003e\u003c/a\u003e\u003cfont style=\"font-size: 14px;\"\u003e is used under the \u003c/font\u003e\u003ca href=\"https://creativecommons.org/licenses/by-sa/4.0/\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eCreative Commons - Attribution - Share Alike license\u003c/font\u003e\u003c/a\u003e\u003cfont style=\"font-size: 14px;\"\u003e.\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003ca href=\"https://www.thingiverse.com/thing:34004\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eScapula (Anatomical Bone) by Bror \u003c/font\u003e\u003c/a\u003e\u003cfont style=\"font-size: 14px;\"\u003eis used under the \u003c/font\u003e\u003ca href=\"https://creativecommons.org/licenses/by-sa/4.0/\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eCreative Commons - Attribution - Share Alike license\u003c/font\u003e\u003c/a\u003e\u003cfont style=\"font-size: 14px;\"\u003e.\u003c/font\u003e\u003c/p\u003e","description_features":"\u003cp style=\"margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eThe popular LulzBot TAZ Dual Extruder v3.1 was re-engineered with a focus on improving air flow at the heat sink for greater efficiency when printing.\u003c/font\u003e\u003c/span\u003e\u003cfont style=\"font-size: 14px;\"\u003e The Dual Extruder v3.1 enables 3D printing complex geometry that would normally require time spent removing same-material supports with a risk of breaking your print and almost always leaving evidence of the support in imperfect bottom surfaces. With water-soluble supports like PVA, let the water do the work and enjoy clean and accurate bottom surfaces.\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eThe Dual Extruder v3.1 features a unibody heatsink and redsigned fan mount with two hot ends co-developed with E3D, makers of the ever popular line of all-metal hot ends. The precision-machined design brings the hot ends closer together, resulting in a dual extruder with no need for nozzle leveling or offset calibration. Just install the tool head and accessories, quickly flash firmware with Cura LulzBot Edition, and start printing. \u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eThe Dual Extruder v3.1 comes with everything you need to install on your LulzBot TAZ 5/6, including an extra wide wiper pad mount that enables your Dual Extruder v3.1 to work flawlessly with LulzBot self-cleaning and self-leveling technology. \u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e \u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003c/p\u003e\u003cp style=\"margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eT\u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003ehe Dual Extruder \u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003ev3.1\u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e was specifically designed for \u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e3D\u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e print\u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eing models with soluble\u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e support material, \u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003ewhich is the primary reason LulzBot users want dual extrusion\u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e. \u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eSoluble support \u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eallows freedom of design \u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003ewhich means \u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003ebetter rapid prototyp\u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003ees\u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e \u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eand better efficiency\u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e. \u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eWe have had many questions about the v3.1’s ability to do other kinds of dual extrusion printing:\u003c/font\u003e\u003c/span\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eQuestion 1:\u003c/font\u003e\u003c/span\u003e\u003cfont style=\"font-size: 14px;\"\u003e Can the LulzBot TAZ Dual Extruder v3.1 Tool Head print in two colors of the same material?\u003c/font\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eAnswer:\u003c/font\u003e\u003c/span\u003e\u003cfont style=\"font-size: 14px;\"\u003e Yes, absolutely, however the print profiles built into Cura LulzBot Edition have not been optimized for multicolor printing. If multicolor printing is your goal, you may need to make modifications to the included profiles for optimal results. We have included all LulzBot supported material base profiles under the Experimental classification in Materials as a good starting point.\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eQuestion 2:\u003c/font\u003e\u003c/span\u003e\u003cfont style=\"font-size: 14px;\"\u003e Can the LulzBot TAZ Dual Extruder v3.1 Tool Head print flexible materials?\u003c/font\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eAnswer:\u003c/font\u003e\u003c/span\u003e\u003cfont style=\"font-size: 14px;\"\u003e Yes, the Dual Extruder v3.1 is capable of printing flexible materials. Through our internal testing, we have found that PolyDissolve S1 and PVA stick very well to TPU’s (flexible filaments), but the profiles have not yet been fine-tuned for optimal cosmetic results. Because of this, all of our flexible material profiles have been included in the Experimental section of Cura LulzBot Edition as a starting point for making your own modifications. Printing with flexible materials is recommended for advanced users on the Dual Extruder v3.1.\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eQuestion 3:\u003c/font\u003e\u003c/span\u003e\u003cfont style=\"font-size: 14px;\"\u003e Can the LulzBot TAZ Dual Extruder v3.1 Tool Head print solid and flexible materials together?\u003c/font\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eAnswer:\u003c/font\u003e\u003c/span\u003e\u003cfont style=\"font-size: 14px;\"\u003e Yes, the hardware of the Dual Extruder v3.1 is capable of printing solid and flexible material together, but the profiles have not been optimized for reliability or cosmetic results. Because of this, all of our flexible and solid material profiles are included in the Experimental section of Cura LulzBot Edition Materials, and can be used as a good starting point for making your own modifications. Printing with flexible and solid materials is recommended for advanced users on the Dual Extruder v3.1.\u003c/font\u003e\u003c/p\u003e","featured":false,"variant_selector":[],"stock":{"global":{"state":"in_stock"}},"brand":null,"images":[{"small":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_60_60-7562.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_300_300-7563.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_500_500-7564.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_60_60-7565.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_300_300-7566.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_500_500-7567.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_60_60-7568.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_300_300-7569.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_500_500-7570.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_60_60-7571.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_300_300-7572.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_500_500-7573.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_60_60-7574.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_300_300-7575.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_500_500-7576.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""}}],"slides_group":[],"variant_attributes_group":{},"id":715,"pack_ok":false,"used_in_pack":[],"index_name":"products"}
{"objectID":3801,"model":{"name":"LulzBot TAZ Dual Extruder V3.1 Tool Head"},"url_key":"store/lulzbot-taz-dual-extruder-v3-1-tool-head-kt-cp0162","redirect_url_key":["lulzbot-taz-dual-extruder-v3-1-tool-head-kt-cp0162"],"main":true,"short_description":"\u003cp style=\"margin-bottom: 0.1in; line-height: 21.6px; font-family: titillium_regular, sans-serif; font-size: 18px;\"\u003eThe re-engineered LulzBot TAZ Dual Extruder v3.1 Tool Head is back by popular demand to take your designs to the next level.  Improved air flow at the heat sink means this trusty Tool Head is now even more prepared to utilize dedicated support material like \u003ca href=\"https://shop.lulzbot.com/polymaker-polydissolve-filament-rm-pv0008?ref=RM-PV0008\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003ePolyDissolve S1\u003c/a\u003e, that dissolves and separates in water, freeing you to focus on the function of your design rather than on how to make it 3D printable.  \u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 21.6px; font-family: titillium_regular, sans-serif; font-size: 18px;\"\u003eThis dual filament extruder does not require nozzle leveling or offset calibration, is lighter and more compact than its predecessor, and features improved heat sink and part cooling. With hassle-free hardware, integrated software, and water-soluble support material, who knew geometric freedom could be this easy?\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 21.6px; font-family: titillium_regular, sans-serif; font-size: 18px;\"\u003e[\u003ca href=\"https://www.lulzbot.com/store/tool-heads/lulzbot-taz-dual-extruder-v3-tool-head#video\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003eWatch The Video\u003c/a\u003e]\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 21.6px; font-family: titillium_regular, sans-serif; font-size: 18px;\"\u003e\u003cbr\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 21.6px; font-family: titillium_regular, sans-serif; font-size: 18px;\"\u003e*01/31/2022 the stock heater cartridge is now 24V 40W\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 21.6px; font-family: titillium_regular, sans-serif; font-size: 18px;\"\u003e*Before purchasing contact support for machine specific compatibility\u003c/p\u003e","description":"\u003cp\u003e\u003ca href=\"https://shop.lulzbot.com/lulzbot-taz-dual-extruder-v3-tool-head-kt-cp0127?ref=KT-CP0127\" class=\"title lato bold lh-22\" style=\"color: rgb(52, 58, 64); text-decoration-line: underline; background-color: rgb(255, 255, 255); font-family: f_t_bold; line-height: 22px; display: block; min-height: 50px; font-size: 18px; font-weight: 700 !important;\"\u003e\u003c/a\u003e\u003ca href=\"https://shop.lulzbot.com/lulzbot-taz-dual-extruder-v3-tool-head-kt-cp0127?ref=KT-CP0127\" class=\"bold lato lh-22 title\" style=\"color: rgb(52, 58, 64); background-color: rgb(255, 255, 255); line-height: 22px; display: block; min-height: 50px;\"\u003e\u003c/a\u003e\u003ca href=\"https://www.lulzbot.com/store/tool-heads/lulzbot-taz-dual-extruder-v3-tool-head#\" class=\"toggle alert-toggle\" style=\"background: rgb(62, 62, 62); color: rgb(193, 214, 64); position: relative; display: block; padding: 0.66667rem 1rem; font-size: 0.8rem; line-height: 1.3125em; font-family: latobold, sans-serif; text-transform: uppercase; transition: color 0.3s ease-in-out 0s; margin-top: 20px; font-weight: 400;\"\u003ePRODUCT ALERT \u003cspan class=\"alert-count\" style=\"font-family: latoregular, sans-serif;\"\u003e(2)\u003c/span\u003e\u003c/a\u003e\u003c/p\u003e\u003cdiv id=\"alert\" style=\"margin-bottom: 1.33333rem; color: rgb(255, 255, 255); background-color: rgb(62, 62, 62); font-family: titillium_regular, sans-serif; font-size: 18px;\"\u003e\u003cdiv style=\"padding: 0px 1.33333rem 1.33333rem;\"\u003e\u003cdiv class=\"field-collection-container clearfix\"\u003e\u003cul class=\"list--ruled\" style=\"margin-right: 0px; margin-bottom: 0px; margin-left: 0px; padding: 0px;\"\u003e\u003cli style=\"list-style: none; margin-top: 0px; padding-top: 1.33333rem; border-top: 0px rgba(255, 255, 255, 0.2);\"\u003e\u003cdiv class=\"alert-title heading--bold\" style=\"font-family: latobold, sans-serif; margin-bottom: 0.33333rem;\"\u003eUpgrading a LulzBot TAZ 5?\u003c/div\u003e\u003cdiv class=\"alert-content\"\u003e\u003cp style=\"margin-bottom: 0.1in; line-height: 21.6px;\"\u003eEarly LulzBot TAZ 5 3D Printer users may need to upgrade their v2a/v2b tool head harness to the \u003ca href=\"https://shop.lulzbot.com/taz-v2c-tool-head-wiring-harness-kt-el0060?ref=KT-EL0060\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(120, 138, 9); outline: 0px; margin-top: 20px;\"\u003eLulzBot TAZ 5 v2c Tool Head Harness\u003c/a\u003e.\u003c/p\u003e\u003c/div\u003e\u003c/li\u003e\u003cli style=\"margin-top: 1.33333rem; list-style: none; padding-top: 1.33333rem; border-top: 1px solid rgba(255, 255, 255, 0.2);\"\u003e\u003cdiv class=\"alert-title heading--bold\" style=\"font-family: latobold, sans-serif; margin-bottom: 0.33333rem;\"\u003eUpgrading an existing Dual Extruder v3 to v3.1\u003c/div\u003e\u003cdiv class=\"alert-content\"\u003e\u003cp style=\"margin-bottom: 0.1in; line-height: 21.6px;\"\u003eDo you own a LulzBot Dual Extruder v3 and want to upgrade your existing tool head to v3.1?\u003cbr\u003e\u003cbr\u003eFind the conversion kit here:\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https://shop.lulzbot.com/dual-v3-to-v3-1-hardware-conversion-kit-kt-hd0023?ref=KT-HD0023\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003eDual Extruder v3.1 Conversion Kit\u003c/a\u003e\u003cbr\u003e\u003cbr\u003eAnd follow these simple \u003ca href=\"https://ohai.lulzbot.com/project/dual-extruder-v3-heat-creep-update/hot-end-tool-head-assembly/\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003eSet-Up Instructions\u003c/a\u003e.\u003c/p\u003e\u003c/div\u003e\u003c/li\u003e\u003c/ul\u003e\u003c/div\u003e\u003c/div\u003e\u003c/div\u003e","name":"LulzBot TAZ Dual Extruder V3.1 Tool Head","short_name":"","seo_title":"LulzBot TAZ Dual Extruder V3.1 Tool Head | LulzBot Industrial High Strength 3D Printing","meta_keywords":null,"meta_description":"By popular demand the TAZ Dual Extruder is back in it's v3.1 revision! With improved heat sink and part cooling to make printing that much more reliable!","variant_count":1,"categories":[{"id":11,"name":"Tool Heads","url_key":"store/tool-heads","level":0}],"sku":"KT-CP0162","variant_attributes":{},"price":{"value":495.0,"tax_included":false,"original_value":495.0,"discount":0.0},"hierarchicalCategories":[{"level":1,"value":"Tool Heads","ancestors":["All"],"order":3}],"filament_material":[],"compatibility":[{"name":"LulzBot TAZ 3D Printer, v6.0 Boxed for Retail, NA"}],"description_parts_specification":"\u003ch2\u003eParts Included\u003c/h2\u003e\u003cp style=\"margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e(1) LulzBot TAZ Dual Extruder Tool Head v3.1 (Fully Assembled)\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e(1) 3D Printed Z-axis endstop extension mount (for TAZ 6)\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e(1) Machined Z-axis endstop extension (for TAZ 6)\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eNote: The Z-axis Toggle Extension and Mount should only be used on a TAZ 6 with the Dual Extruder v3.1 Tool Head. Leaving this extension on the printer and using it with other tool heads will cause failed probes due to the higher registered minimum position.\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e(1) Dual v3 wiper mount\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e(1) Additional spool arm\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e(1) Feed tube spinner\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e(1) T-nut holder jig\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e(1) Idler jig\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e(4) Wire tie \u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e(1) Extruder wiring harness for second extruder\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e(1) M5 washer (Black)\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e(1) M5 x 14 mm socket head cap screw\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e(1) Filament Feed tube\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cbr\u003e\u003c/p\u003e\u003ch2\u003eSpecifications\u003c/h2\u003e\u003cp style=\"margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eRequired filament diameter: 2.85mm diameter\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eHot end temperature range: 120°C - 300°C\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eNozzle diameters: 0.5mm\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eRequired power system: 24 Volts\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eFans: Two 24v 40mm axial fans for extrusion cooling, one 5v 40mm axial fan for heat-sink cooling\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eWeight: 0.96 kg (2.11 lbs)\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eHeater Cartridge: 24V 40W\u003c/font\u003e\u003c/p\u003e","description_resources_documentation":"\u003ch2\u003eMore Information\u003c/h2\u003e\u003cp style=\"margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003ca href=\"https://ohai.lulzbot.com/project/lulzbot-taz-dual-extruder-tool-head-v3-install\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eInstallation Instructions LulzBot TAZ 6\u003c/font\u003e\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003ca href=\"https://ohai.lulzbot.com/workflow/LulzBot-TAZ-5-Dual-Extruder-v3-Install/accessories/\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eInstallation Instructions LulzBot TAZ 5\u003c/font\u003e\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003ca href=\"https://gitlab.com/lulzbot3d/tool-heads/yellowfin\" target=\"_blank\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eSource and Bill of Materials\u003c/font\u003e\u003c/a\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e \u003c/p\u003e\u003ch2\u003e3D Model Attribution\u003c/h2\u003e\u003cp style=\"margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003ca href=\"https://download.lulzbot.com/3D_Models/Razor/\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eRazor\u003c/font\u003e\u003c/a\u003e\u003cfont style=\"font-size: 14px;\"\u003e is used under the \u003c/font\u003e\u003ca href=\"https://creativecommons.org/licenses/by-sa/4.0/\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eCreative Commons - Attribution - Share Alike license\u003c/font\u003e\u003c/a\u003e\u003cfont style=\"font-size: 14px;\"\u003e.\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003ca href=\"https://devel.lulzbot.com/3d_models/Impossible_Gear/\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eImpossible Gear\u003c/font\u003e\u003c/a\u003e\u003cfont style=\"font-size: 14px;\"\u003e is used under the \u003c/font\u003e\u003ca href=\"https://creativecommons.org/licenses/by-sa/4.0/\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eCreative Commons - Attribution - Share Alike license\u003c/font\u003e\u003c/a\u003e\u003cfont style=\"font-size: 14px;\"\u003e.\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003ca href=\"https://www.thingiverse.com/thing:367268\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eHumerus_Right Human Skeleton Upper Arm Bone by profguy\u003c/font\u003e\u003c/a\u003e\u003cfont style=\"font-size: 14px;\"\u003e is used under the \u003c/font\u003e\u003ca href=\"https://creativecommons.org/licenses/by-sa/4.0/\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eCreative Commons - Attribution - Share Alike license\u003c/font\u003e\u003c/a\u003e\u003cfont style=\"font-size: 14px;\"\u003e.\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003ca href=\"https://www.thingiverse.com/thing:115799\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eEngine by Marin\u003c/font\u003e\u003c/a\u003e\u003cfont style=\"font-size: 14px;\"\u003e is used under the \u003c/font\u003e\u003ca href=\"https://creativecommons.org/licenses/by-sa/4.0/\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eCreative Commons - Attribution - Share Alike license\u003c/font\u003e\u003c/a\u003e\u003cfont style=\"font-size: 14px;\"\u003e.\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003ca href=\"https://www.thingiverse.com/thing:34004\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eScapula (Anatomical Bone) by Bror \u003c/font\u003e\u003c/a\u003e\u003cfont style=\"font-size: 14px;\"\u003eis used under the \u003c/font\u003e\u003ca href=\"https://creativecommons.org/licenses/by-sa/4.0/\" style=\"background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial; color: rgb(162, 186, 12); margin-top: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eCreative Commons - Attribution - Share Alike license\u003c/font\u003e\u003c/a\u003e\u003cfont style=\"font-size: 14px;\"\u003e.\u003c/font\u003e\u003c/p\u003e","description_features":"\u003cp style=\"margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eThe popular LulzBot TAZ Dual Extruder v3.1 was re-engineered with a focus on improving air flow at the heat sink for greater efficiency when printing.\u003c/font\u003e\u003c/span\u003e\u003cfont style=\"font-size: 14px;\"\u003e The Dual Extruder v3.1 enables 3D printing complex geometry that would normally require time spent removing same-material supports with a risk of breaking your print and almost always leaving evidence of the support in imperfect bottom surfaces. With water-soluble supports like PVA, let the water do the work and enjoy clean and accurate bottom surfaces.\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eThe Dual Extruder v3.1 features a unibody heatsink and redsigned fan mount with two hot ends co-developed with E3D, makers of the ever popular line of all-metal hot ends. The precision-machined design brings the hot ends closer together, resulting in a dual extruder with no need for nozzle leveling or offset calibration. Just install the tool head and accessories, quickly flash firmware with Cura LulzBot Edition, and start printing. \u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eThe Dual Extruder v3.1 comes with everything you need to install on your LulzBot TAZ 5/6, including an extra wide wiper pad mount that enables your Dual Extruder v3.1 to work flawlessly with LulzBot self-cleaning and self-leveling technology. \u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e \u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003c/p\u003e\u003cp style=\"margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eT\u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003ehe Dual Extruder \u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003ev3.1\u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e was specifically designed for \u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e3D\u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e print\u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eing models with soluble\u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e support material, \u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003ewhich is the primary reason LulzBot users want dual extrusion\u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e. \u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eSoluble support \u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eallows freedom of design \u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003ewhich means \u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003ebetter rapid prototyp\u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003ees\u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e \u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eand better efficiency\u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003e. \u003c/font\u003e\u003c/span\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eWe have had many questions about the v3.1’s ability to do other kinds of dual extrusion printing:\u003c/font\u003e\u003c/span\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eQuestion 1:\u003c/font\u003e\u003c/span\u003e\u003cfont style=\"font-size: 14px;\"\u003e Can the LulzBot TAZ Dual Extruder v3.1 Tool Head print in two colors of the same material?\u003c/font\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eAnswer:\u003c/font\u003e\u003c/span\u003e\u003cfont style=\"font-size: 14px;\"\u003e Yes, absolutely, however the print profiles built into Cura LulzBot Edition have not been optimized for multicolor printing. If multicolor printing is your goal, you may need to make modifications to the included profiles for optimal results. We have included all LulzBot supported material base profiles under the Experimental classification in Materials as a good starting point.\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eQuestion 2:\u003c/font\u003e\u003c/span\u003e\u003cfont style=\"font-size: 14px;\"\u003e Can the LulzBot TAZ Dual Extruder v3.1 Tool Head print flexible materials?\u003c/font\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eAnswer:\u003c/font\u003e\u003c/span\u003e\u003cfont style=\"font-size: 14px;\"\u003e Yes, the Dual Extruder v3.1 is capable of printing flexible materials. Through our internal testing, we have found that PolyDissolve S1 and PVA stick very well to TPU’s (flexible filaments), but the profiles have not yet been fine-tuned for optimal cosmetic results. Because of this, all of our flexible material profiles have been included in the Experimental section of Cura LulzBot Edition as a starting point for making your own modifications. Printing with flexible materials is recommended for advanced users on the Dual Extruder v3.1.\u003c/font\u003e\u003c/p\u003e\u003cp style=\"margin-top: 1.16667rem; margin-bottom: 0.1in; line-height: 24px; font-family: titillium_regular, sans-serif; font-size: 20px;\"\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eQuestion 3:\u003c/font\u003e\u003c/span\u003e\u003cfont style=\"font-size: 14px;\"\u003e Can the LulzBot TAZ Dual Extruder v3.1 Tool Head print solid and flexible materials together?\u003c/font\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-family: titillium_semibold, sans-serif;\"\u003e\u003cfont style=\"font-size: 14px;\"\u003eAnswer:\u003c/font\u003e\u003c/span\u003e\u003cfont style=\"font-size: 14px;\"\u003e Yes, the hardware of the Dual Extruder v3.1 is capable of printing solid and flexible material together, but the profiles have not been optimized for reliability or cosmetic results. Because of this, all of our flexible and solid material profiles are included in the Experimental section of Cura LulzBot Edition Materials, and can be used as a good starting point for making your own modifications. Printing with flexible and solid materials is recommended for advanced users on the Dual Extruder v3.1.\u003c/font\u003e\u003c/p\u003e","featured":false,"variant_selector":[],"stock":{"global":{"state":"in_stock"}},"brand":null,"images":[{"small":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_60_60-7562.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_300_300-7563.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_500_500-7564.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_60_60-7565.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_300_300-7566.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_500_500-7567.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_60_60-7568.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_300_300-7569.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_500_500-7570.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_60_60-7571.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_300_300-7572.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_500_500-7573.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""}},{"small":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_60_60-7574.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""},"medium":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_300_300-7575.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""},"large":{"src":"https://assets.lulzbot.com/lulzbot-taz-dual-extruder-v3-1-tool-head_500_500-7576.jpg","alt":"LulzBot TAZ Dual Extruder V3.1 Tool Head","tag":""}}],"slides_group":[],"variant_attributes_group":{},"id":715,"pack_ok":false,"used_in_pack":[],"index_name":"products"}
.
A notice about cookies

This website uses cookies. By continuing to browse this site, you agree to their use.

See all options