Loading...

Mini 2 ABS+ Enclosure

Use this 3D printer enclosure with your LulzBot Mini to minimize warping and cracking caused by printing in cold and drafty environments while keeping curious hands and paws away from heated and moving parts of your 3D printer. This enclosure features a strengthened design with ABS panels, LulzBot branded laser-etched acrylic, and comes ready to assemble with all components provided (no 3D printing required).

Perfect for:

  • Cold and/or drafty environments
  • Printing materials with high shrink rates, like ABS, Nylons (Polyamides), and Polycarbonates
  • Classrooms, Libraries, and high-traffic areas with curious hands
Read more
Compatibility:
LulzBot Mini v2.0, Boxed for Retail, AU
LulzBot Mini v2.0, Boxed for Retail, EU
LulzBot Mini v2.0, Boxed for Retail, NA

This enclosure is made with optically clear, lightweight 3 mm thick extruded acrylic and rugged ABS panels. Assembly and installation is easy as this kit contains all the necessary hardware, including the four 3D printed corner brackets.

Advanced users can mount a 40 mm fan to vent air from the enclosure, add filtration, and more. When assembled, this enclosure only adds 105 mm (4.1 in) along the length of the Y-axis ( front to back).

Parts Included

Laser cut, extruded 3 mm thick acrylic sheets and ABS panels 

  • Two (2) Part A: Front and rear panel with logo PDF SVG

  • Two (2) Part B: Rear cover sides PDF SVG

  • One (1) Part C: Rear cover top PDF SVG

  • One (1) Part D: Rear cover bottom PDF SVG

  • One (1) Part E: Front cover sides PDF SVG

  • One (1) Part F: Front cover top PDF SVG

  • One (1) Part G: Front cover bottom PDF SVG

  • Two (2) Part H: Front and rear cover stiffener PDF SVG

  • One (1) Part I: Short side cover PDF SVG

  • One (1) Part J: Long side cover PDF SVG

  • One (1) Part K: Top cover PDF SVG

  • One (1) Part L: Optional top insert PDF SVG

36 M3-10 mm bolts

8 M3-40 mm bolts

36 M3 square nuts

2 M3 washers

Printed copy of Assembly Instructions 

Two (2) 3D printed left brackets (STL)

Two (2) 3D printed right bracket (STL)

One (1) 3D printed Mini LCD bracket (STL)

Mini left and right brackets by David Randolph & Printed Solid used under the CC BY-SA 4.0 license.

Tools Needed

2 mm hex driver

2.5 mm hex driver

Optional: Painters tape

Optional: Flat razor

Time Required

1-2 hours, based on skill level

Physical Dimensions

LulzBot Mini Dimensions (Standard): 435 mm x 340 mm x 385 mm (17.1 in x 13.4 in x 15.2 in)

LulzBot Mini Dimensions (with Enclosure): 435 mm x 445 mm x 385 mm (17.1 in x 17.5 in x 15.2 in)

Enclosure adds an additional 105 mm (4.1 in) in the Y-axis (from front to back).

Warnings

Acrylic can easily crack - do not over tighten the screws. Tighten to hold without movement.

When cleaning, use dish soap or hand wash and a soft, clean cloth. Do not use Windex® or other glass cleaning solutions. Do not use a hard sponge, scrub, or abrasive surface.

Windex is a registered trademark of S.C. Johnson, Inc.

Support Information

Have questions? Contact the sales support team by emailing Sales@LulzBot.com or by calling +1-970-377-1111.

More Information

Assembly Instructions


Source Files

Source

Printed Part Files

3D printed left brackets (STL)

3D printed right bracket (STL)

3D printed Mini LCD bracket (STL)

Mini left and right brackets by David Randolph & Printed Solid used under the CC BY-SA 4.0 license. See recommended print settings in Step 1 of the Assembly Instructions.

LulzBot Mini Enclosure Bracket for LCD (STL) for installation with LulzBot Graphical LCD Controller and LulzBot Mini 2 

Bracket by David Randolph & Printed Solid used under the CC BY-SA 3.0 license.

Emissions and Ultra-fine Particles

This is an enclosure designed to minimize the effects of the ambient environment around your printer and keep curious hands and paws away from the heated and moving components of your 3D printer. It does include a built-in location for mounting a 40 mm fan to vent air from the chamber and further modifications can be made.

Users concerned about emissions and ultra-fine articles should instead use materials made from Eastman Amphora co-polyesters such as colorFabb nGen and Chroma Strand Labs INOVA-1800. For more information, read the Guide to printing Eastman Amphora (PDF) and the ultrafine particles emission study (PDF).


Warnings

Acrylic can easily crack - do not over tighten the screws. Tighten to hold without movement. 

When cleaning, use dish soap or hand wash and a soft, clean cloth. Do not use Windex® or other glass cleaning solutions. Do not use a hard sponge, scrub, or abrasive surface. 

Windex is a registered trademark of S.C. Johnson, Inc.

Support Information

Have questions? Contact the sales support team by emailing Sales@LulzBot.com or by calling +1-970-377-1111.

Prop. 65 warning
$ 200 00
200.0
{"objectID":4264,"model":{"name":"Mini 2 ABS+ Enclosure"},"url_key":"store/mini-2-abs-enclosure-kt-fp0034","redirect_url_key":["lulzbot-mini-2-enclosure-abs-kt-fp0034","lulzbot-mini-2-abs-enclosure-kt-fp0034","lulzbot-mini-abs-enclosure-kt-fp0034","mini-2-abs-enclosure-kt-fp0034"],"main":true,"short_description":"\u003cp\u003eUse this 3D printer enclosure with your LulzBot Mini to minimize warping and cracking caused by printing in cold and drafty environments while keeping curious hands and paws away from heated and moving parts of your 3D printer. This enclosure features a strengthened design with ABS panels, LulzBot branded laser-etched acrylic, and comes ready to assemble with all components provided (no 3D printing required).\u003c/p\u003e\u003cp\u003ePerfect for:\u003c/p\u003e\u003cul style=\"margin-top: 0.67rem;\"\u003e\u003cli\u003eCold and/or drafty environments\u003c/li\u003e\u003cli\u003ePrinting materials with high shrink rates, like ABS, Nylons (Polyamides), and Polycarbonates\u003c/li\u003e\u003cli\u003eClassrooms, Libraries, and high-traffic areas with curious hands\u003c/li\u003e\u003c/ul\u003e","description":"\u003cp\u003e\u003cbr\u003e\u003c/p\u003e","name":"Mini 2 ABS+ Enclosure","short_name":"","seo_title":"LulzBot Mini ABS+ Enclosure | 3D Printer Acrylic Enclosure | LulzBot","meta_keywords":null,"meta_description":"Keep curious hands away from your 3D printer with this acrylic enclosure from LulzBot. Use this enclosure with your LulzBot Mini to minimize warping cause by cold environments.","variant_count":1,"categories":[{"id":12,"name":"Accessories","url_key":"store/accessories","level":0}],"sku":"KT-FP0034","variant_attributes":{},"price":{"value":200.0,"tax_included":false,"original_value":200.0,"discount":0.0},"hierarchicalCategories":[{"level":1,"value":"Accessories","ancestors":["All"],"order":8}],"filament_material":[],"compatibility":[{"name":"LulzBot Mini v2.0, Boxed for Retail, AU"},{"name":"LulzBot Mini v2.0, Boxed for Retail, EU"},{"name":"LulzBot Mini v2.0, Boxed for Retail, NA"}],"description_parts_specification":"\u003ch4\u003eParts Included\u003c/h4\u003e\u003cp\u003eLaser cut, extruded 3 mm thick acrylic sheets and ABS panels \u003c/p\u003e\u003cblockquote data-o-mail-quote=\"1\"\u003e\u003cul\u003e\u003cli\u003e\u003cp\u003e\u003ci\u003eTwo (2) Part A: Front and rear panel with logo \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/pdf/A.pdf\" target=\"_blank\"\u003ePDF \u003c/a\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/svg/A.svg\" target=\"_blank\"\u003eSVG\u003c/a\u003e\u003c/i\u003e\u003c/p\u003e\u003c/li\u003e\u003cli\u003e\u003cp\u003e\u003ci\u003eTwo (2) Part B: Rear cover sides \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/pdf/B.pdf\" target=\"_blank\"\u003ePDF \u003c/a\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/svg/B.svg\" target=\"_blank\"\u003eSVG\u003c/a\u003e\u003c/i\u003e\u003c/p\u003e\u003c/li\u003e\u003cli\u003e\u003cp\u003e\u003ci\u003eOne (1) Part C: Rear cover top \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/pdf/C.pdf\" target=\"_blank\"\u003ePDF \u003c/a\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/svg/C.svg\" target=\"_blank\"\u003eSVG\u003c/a\u003e\u003c/i\u003e\u003c/p\u003e\u003c/li\u003e\u003cli\u003e\u003cp\u003e\u003ci\u003eOne (1) Part D: Rear cover bottom \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/pdf/D.pdf\" target=\"_blank\"\u003ePDF \u003c/a\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/svg/D.svg\" target=\"_blank\"\u003eSVG\u003c/a\u003e\u003c/i\u003e\u003c/p\u003e\u003c/li\u003e\u003cli\u003e\u003cp\u003e\u003ci\u003eOne (1) Part E: Front cover sides \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/pdf/E.pdf\" target=\"_blank\"\u003ePDF \u003c/a\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/svg/E.svg\" target=\"_blank\"\u003eSVG\u003c/a\u003e\u003c/i\u003e\u003c/p\u003e\u003c/li\u003e\u003cli\u003e\u003cp\u003e\u003ci\u003eOne (1) Part F: Front cover top \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/pdf/F.pdf\" target=\"_blank\"\u003ePDF \u003c/a\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/svg/F.svg\" target=\"_blank\"\u003eSVG\u003c/a\u003e\u003c/i\u003e\u003c/p\u003e\u003c/li\u003e\u003cli\u003e\u003cp\u003e\u003ci\u003eOne (1) Part G: Front cover bottom \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/pdf/G.pdf\" target=\"_blank\"\u003ePDF \u003c/a\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/svg/G.svg\" target=\"_blank\"\u003eSVG\u003c/a\u003e\u003c/i\u003e\u003c/p\u003e\u003c/li\u003e\u003cli\u003e\u003cp\u003e\u003ci\u003eTwo (2) Part H: Front and rear cover stiffener \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/pdf/H.pdf\" target=\"_blank\"\u003ePDF \u003c/a\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/svg/H.svg\" target=\"_blank\"\u003eSVG\u003c/a\u003e\u003c/i\u003e\u003c/p\u003e\u003c/li\u003e\u003cli\u003e\u003cp\u003e\u003ci\u003eOne (1) Part I: Short side cover \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/pdf/I.pdf\" target=\"_blank\"\u003ePDF \u003c/a\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/svg/I.svg\" target=\"_blank\"\u003eSVG\u003c/a\u003e\u003c/i\u003e\u003c/p\u003e\u003c/li\u003e\u003cli\u003e\u003cp\u003e\u003ci\u003eOne (1) Part J: Long side cover \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/pdf/J.pdf\" target=\"_blank\"\u003ePDF \u003c/a\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/svg/J.svg\" target=\"_blank\"\u003eSVG\u003c/a\u003e\u003c/i\u003e\u003c/p\u003e\u003c/li\u003e\u003cli\u003e\u003cp\u003e\u003ci\u003eOne (1) Part K: Top cover \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/pdf/K.pdf\" target=\"_blank\"\u003ePDF \u003c/a\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/svg/K.svg\" target=\"_blank\"\u003eSVG\u003c/a\u003e\u003c/i\u003e\u003c/p\u003e\u003c/li\u003e\u003cli\u003e\u003cp\u003e\u003ci\u003eOne (1) Part L: Optional top insert \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/pdf/L.pdf\" target=\"_blank\"\u003ePDF \u003c/a\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/svg/L.svg\" target=\"_blank\"\u003eSVG\u003c/a\u003e\u003c/i\u003e\u003c/p\u003e\u003c/li\u003e\u003c/ul\u003e\u003c/blockquote\u003e\u003cp\u003e36 M3-10 mm bolts\u003c/p\u003e\u003cp\u003e8 M3-40 mm bolts\u003c/p\u003e\u003cp\u003e36 M3 square nuts\u003c/p\u003e\u003cp\u003e2 M3 washers\u003c/p\u003e\u003cp\u003ePrinted copy of Assembly Instructions \u003c/p\u003e\u003cp\u003eTwo (2) \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/printed_parts/\" target=\"_blank\" style=\"background-color: rgb(255, 255, 255); font-size: inherit; font-style: inherit; font-variant-ligatures: inherit; font-variant-caps: inherit; font-weight: inherit; text-align: inherit;\"\u003e3D printed left brackets (STL)\u003c/a\u003e\u003c/p\u003e\u003cp\u003eTwo (2) \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/printed_parts/\" target=\"_blank\" style=\"background-color: rgb(255, 255, 255); font-size: inherit; font-style: inherit; font-variant-ligatures: inherit; font-variant-caps: inherit; font-weight: inherit; text-align: inherit;\"\u003e3D printed right bracket (STL)\u003c/a\u003e\u003c/p\u003e\u003cp\u003eOne (1) \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/printed_parts/\" target=\"_blank\" style=\"background-color: rgb(255, 255, 255); font-size: inherit; font-style: inherit; font-variant-ligatures: inherit; font-variant-caps: inherit; font-weight: inherit; text-align: inherit;\"\u003e3D printed Mini LCD bracket (STL)\u003c/a\u003e\u003c/p\u003e\u003cp\u003e\u003cem\u003eMini left and right brackets by \u003c/em\u003e\u003cem\u003eDavid Randolph \u0026amp; Printed Solid \u003c/em\u003e\u003cem\u003eused under the \u003ca href=\"https://creativecommons.org/licenses/by-sa/4.0/\" target=\"_blank\"\u003eCC BY-SA 4.0\u003c/a\u003e license.\u003c/em\u003e\u003c/p\u003e\u003ch4\u003eTools Needed\u003c/h4\u003e\u003cp\u003e2 mm hex driver\u003c/p\u003e\u003cp\u003e2.5 mm hex driver\u003c/p\u003e\u003cp\u003eOptional: Painters tape\u003c/p\u003e\u003cp\u003eOptional: Flat razor\u003c/p\u003e\u003ch4\u003eTime Required\u003c/h4\u003e\u003cp\u003e1-2 hours, based on skill level\u003c/p\u003e\u003ch4\u003ePhysical Dimensions\u003c/h4\u003e\u003cp\u003eLulzBot Mini Dimensions (Standard): 435 mm x 340 mm x 385 mm (17.1 in x 13.4 in x 15.2 in)\u003c/p\u003e\u003cp\u003eLulzBot Mini Dimensions (with Enclosure): 435 mm x 445 mm x 385 mm (17.1 in x 17.5 in x 15.2 in)\u003c/p\u003e\u003cp\u003eEnclosure adds an additional 105 mm (4.1 in) in the Y-axis (from front to back).\u003c/p\u003e\u003ch4\u003eWarnings\u003c/h4\u003e\u003cp\u003eAcrylic can easily crack - do not over tighten the screws. Tighten to hold without movement.\u003c/p\u003e\u003cp\u003eWhen cleaning, use dish soap or hand wash and a soft, clean cloth. Do not use Windex® or other glass cleaning solutions. Do not use a hard sponge, scrub, or abrasive surface.\u003c/p\u003e\u003cp\u003e\u003cem\u003eWindex is a registered trademark of S.C. Johnson, Inc.\u003c/em\u003e\u003c/p\u003e\u003ch4\u003eSupport Information\u003c/h4\u003e\u003cp\u003eHave questions? Contact the sales support team by emailing \u003ca href=\"mailto:Sales@LulzBot.com?subject=LulzBot TAZ 6 Enclosure\"\u003eSales@LulzBot.com\u003c/a\u003e or by calling +1-970-377-1111.\u003c/p\u003e","description_resources_documentation":"\u003ch4\u003eMore Information\u003c/h4\u003e\u003cp\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/production_docs/LulzBot_Mini2-ABSplus_Enclosure_Instructions.pdf\" target=\"_blank\"\u003eAssembly Instructions\u003c/a\u003e\u003c/p\u003e\u003cp\u003e\u003cbr\u003e\u003c/p\u003e\u003ch4\u003eSource Files\u003c/h4\u003e\u003cp\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/\" target=\"_blank\"\u003eSource\u003c/a\u003e\u003c/p\u003e\u003ch4\u003ePrinted Part Files\u003c/h4\u003e\u003cp\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/printed_parts/\" target=\"_blank\"\u003e3D printed left brackets (STL)\u003c/a\u003e\u003c/p\u003e\u003cp\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/printed_parts/\" target=\"_blank\"\u003e3D printed right bracket (STL)\u003c/a\u003e\u003c/p\u003e\u003cp\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/printed_parts/\" target=\"_blank\"\u003e3D printed Mini LCD bracket (STL)\u003c/a\u003e\u003c/p\u003e\u003cp\u003e\u003cem\u003eMini left and right brackets by David Randolph \u0026amp; Printed Solid used under the \u003ca href=\"https://creativecommons.org/licenses/by-sa/4.0/\" target=\"_blank\"\u003eCC BY-SA 4.0\u003c/a\u003e license. See recommended print settings in Step 1 of the Assembly Instructions. \u003c/em\u003e\u003c/p\u003e\u003cp\u003eLulzBot Mini Enclosure Bracket for LCD (STL) for installation with LulzBot Graphical LCD Controller and LulzBot Mini 2 \u003c/p\u003e\u003cp\u003e\u003cem\u003eBracket by David Randolph \u0026amp; Printed Solid used under the \u003ca href=\"https://creativecommons.org/licenses/by/3.0/\" target=\"_blank\"\u003eCC BY-SA 3.0\u003c/a\u003e license. \u003c/em\u003e\u003c/p\u003e\u003ch4\u003eEmissions and Ultra-fine Particles\u003c/h4\u003e\u003cp\u003eThis is an enclosure designed to minimize the effects of the ambient environment around your printer and keep curious hands and paws away from the heated and moving components of your 3D printer. It does include a built-in location for mounting a 40 mm fan to vent air from the chamber and further modifications can be made.\u003c/p\u003e\u003cp\u003eUsers concerned about emissions and ultra-fine articles should instead use materials made from Eastman Amphora co-polyesters such as\u003ca href=\"https://shop.lulzbot.com/colorfabb-ngen-filament?ref=RM-MS0033\" target=\"_blank\"\u003e colorFabb nGen\u003c/a\u003e and \u003ca href=\"https://shop.lulzbot.com/chroma-strand-inova-1800-filament?ref=RM-NY0018\" target=\"_blank\"\u003eChroma Strand Labs INOVA-1800\u003c/a\u003e. For more information, read the \u003ca href=\"https://www.lulzbot.com/sites/default/files/guide_to_printing_with_Amphora-SPMBS1497.pdf\" target=\"_blank\"\u003eGuide to printing Eastman Amphora (PDF)\u003c/a\u003e and the \u003ca href=\"https://pubs.acs.org/doi/pdf/10.1021/acs.est.5b04983\" target=\"_blank\"\u003eultrafine particles emission study (PDF)\u003c/a\u003e.\u003c/p\u003e\u003cp\u003e\u003cbr\u003e\u003c/p\u003e\u003ch4\u003eWarnings\u003c/h4\u003e\u003cp\u003eAcrylic can easily crack - do not over tighten the screws. Tighten to hold without movement. \u003c/p\u003e\u003cp\u003eWhen cleaning, use dish soap or hand wash and a soft, clean cloth. Do not use Windex® or other glass cleaning solutions. Do not use a hard sponge, scrub, or abrasive surface. \u003c/p\u003e\u003cp\u003e\u003cem\u003eWindex is a registered trademark of S.C. Johnson, Inc.\u003c/em\u003e\u003c/p\u003e\u003ch4\u003eSupport Information\u003c/h4\u003e\u003cp\u003eHave questions? Contact the sales support team by emailing \u003ca href=\"mailto:Sales@LulzBot.com?subject=LulzBot TAZ 6 Enclosure\"\u003eSales@LulzBot.com\u003c/a\u003e or by calling +1-970-377-1111.\u003c/p\u003e","description_features":"\u003cp\u003eThis enclosure is made with optically clear, lightweight 3 mm thick extruded acrylic and rugged ABS panels. Assembly and installation is easy as this kit contains all the necessary hardware, including the four 3D printed corner brackets.\u003c/p\u003e\u003cp\u003eAdvanced users can mount a 40 mm fan to vent air from the enclosure, add filtration, and more. When assembled, this enclosure only adds 105 mm (4.1 in) along the length of the Y-axis ( front to back).\u003c/p\u003e","featured":false,"variant_selector":[],"stock":{"global":{"state":"in_stock"}},"brand":null,"images":[{"small":{"src":"https://assets.lulzbot.com/mini-2-abs-enclosure_60_60-12665.jpg","alt":"Mini 2 ABS+ Enclosure","tag":""},"medium":{"src":"https://assets.lulzbot.com/mini-2-abs-enclosure_300_300-12666.jpg","alt":"Mini 2 ABS+ Enclosure","tag":""},"large":{"src":"https://assets.lulzbot.com/mini-2-abs-enclosure_500_500-12667.jpg","alt":"Mini 2 ABS+ Enclosure","tag":""}},{"small":{"src":"https://assets.lulzbot.com/mini-2-abs-enclosure_60_60-12668.jpg","alt":"Mini 2 ABS+ Enclosure","tag":""},"medium":{"src":"https://assets.lulzbot.com/mini-2-abs-enclosure_300_300-12669.jpg","alt":"Mini 2 ABS+ Enclosure","tag":""},"large":{"src":"https://assets.lulzbot.com/mini-2-abs-enclosure_500_500-12670.jpg","alt":"Mini 2 ABS+ Enclosure","tag":""}}],"slides_group":[],"variant_attributes_group":{},"id":1224,"pack_ok":false,"used_in_pack":[{"objectID":9763},{"objectID":9764},{"objectID":9786},{"objectID":9789}],"index_name":"products"}
Overview


Mini 2 ABS+ Enclosure

Mini 2 ABS+ Enclosure


$ 200 00
200.0

{"objectID":4264,"model":{"name":"Mini 2 ABS+ Enclosure"},"url_key":"store/mini-2-abs-enclosure-kt-fp0034","redirect_url_key":["lulzbot-mini-2-enclosure-abs-kt-fp0034","lulzbot-mini-2-abs-enclosure-kt-fp0034","lulzbot-mini-abs-enclosure-kt-fp0034","mini-2-abs-enclosure-kt-fp0034"],"main":true,"short_description":"\u003cp\u003eUse this 3D printer enclosure with your LulzBot Mini to minimize warping and cracking caused by printing in cold and drafty environments while keeping curious hands and paws away from heated and moving parts of your 3D printer. This enclosure features a strengthened design with ABS panels, LulzBot branded laser-etched acrylic, and comes ready to assemble with all components provided (no 3D printing required).\u003c/p\u003e\u003cp\u003ePerfect for:\u003c/p\u003e\u003cul style=\"margin-top: 0.67rem;\"\u003e\u003cli\u003eCold and/or drafty environments\u003c/li\u003e\u003cli\u003ePrinting materials with high shrink rates, like ABS, Nylons (Polyamides), and Polycarbonates\u003c/li\u003e\u003cli\u003eClassrooms, Libraries, and high-traffic areas with curious hands\u003c/li\u003e\u003c/ul\u003e","description":"\u003cp\u003e\u003cbr\u003e\u003c/p\u003e","name":"Mini 2 ABS+ Enclosure","short_name":"","seo_title":"LulzBot Mini ABS+ Enclosure | 3D Printer Acrylic Enclosure | LulzBot","meta_keywords":null,"meta_description":"Keep curious hands away from your 3D printer with this acrylic enclosure from LulzBot. Use this enclosure with your LulzBot Mini to minimize warping cause by cold environments.","variant_count":1,"categories":[{"id":12,"name":"Accessories","url_key":"store/accessories","level":0}],"sku":"KT-FP0034","variant_attributes":{},"price":{"value":200.0,"tax_included":false,"original_value":200.0,"discount":0.0},"hierarchicalCategories":[{"level":1,"value":"Accessories","ancestors":["All"],"order":8}],"filament_material":[],"compatibility":[{"name":"LulzBot Mini v2.0, Boxed for Retail, AU"},{"name":"LulzBot Mini v2.0, Boxed for Retail, EU"},{"name":"LulzBot Mini v2.0, Boxed for Retail, NA"}],"description_parts_specification":"\u003ch4\u003eParts Included\u003c/h4\u003e\u003cp\u003eLaser cut, extruded 3 mm thick acrylic sheets and ABS panels \u003c/p\u003e\u003cblockquote data-o-mail-quote=\"1\"\u003e\u003cul\u003e\u003cli\u003e\u003cp\u003e\u003ci\u003eTwo (2) Part A: Front and rear panel with logo \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/pdf/A.pdf\" target=\"_blank\"\u003ePDF \u003c/a\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/svg/A.svg\" target=\"_blank\"\u003eSVG\u003c/a\u003e\u003c/i\u003e\u003c/p\u003e\u003c/li\u003e\u003cli\u003e\u003cp\u003e\u003ci\u003eTwo (2) Part B: Rear cover sides \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/pdf/B.pdf\" target=\"_blank\"\u003ePDF \u003c/a\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/svg/B.svg\" target=\"_blank\"\u003eSVG\u003c/a\u003e\u003c/i\u003e\u003c/p\u003e\u003c/li\u003e\u003cli\u003e\u003cp\u003e\u003ci\u003eOne (1) Part C: Rear cover top \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/pdf/C.pdf\" target=\"_blank\"\u003ePDF \u003c/a\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/svg/C.svg\" target=\"_blank\"\u003eSVG\u003c/a\u003e\u003c/i\u003e\u003c/p\u003e\u003c/li\u003e\u003cli\u003e\u003cp\u003e\u003ci\u003eOne (1) Part D: Rear cover bottom \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/pdf/D.pdf\" target=\"_blank\"\u003ePDF \u003c/a\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/svg/D.svg\" target=\"_blank\"\u003eSVG\u003c/a\u003e\u003c/i\u003e\u003c/p\u003e\u003c/li\u003e\u003cli\u003e\u003cp\u003e\u003ci\u003eOne (1) Part E: Front cover sides \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/pdf/E.pdf\" target=\"_blank\"\u003ePDF \u003c/a\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/svg/E.svg\" target=\"_blank\"\u003eSVG\u003c/a\u003e\u003c/i\u003e\u003c/p\u003e\u003c/li\u003e\u003cli\u003e\u003cp\u003e\u003ci\u003eOne (1) Part F: Front cover top \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/pdf/F.pdf\" target=\"_blank\"\u003ePDF \u003c/a\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/svg/F.svg\" target=\"_blank\"\u003eSVG\u003c/a\u003e\u003c/i\u003e\u003c/p\u003e\u003c/li\u003e\u003cli\u003e\u003cp\u003e\u003ci\u003eOne (1) Part G: Front cover bottom \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/pdf/G.pdf\" target=\"_blank\"\u003ePDF \u003c/a\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/svg/G.svg\" target=\"_blank\"\u003eSVG\u003c/a\u003e\u003c/i\u003e\u003c/p\u003e\u003c/li\u003e\u003cli\u003e\u003cp\u003e\u003ci\u003eTwo (2) Part H: Front and rear cover stiffener \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/pdf/H.pdf\" target=\"_blank\"\u003ePDF \u003c/a\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/svg/H.svg\" target=\"_blank\"\u003eSVG\u003c/a\u003e\u003c/i\u003e\u003c/p\u003e\u003c/li\u003e\u003cli\u003e\u003cp\u003e\u003ci\u003eOne (1) Part I: Short side cover \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/pdf/I.pdf\" target=\"_blank\"\u003ePDF \u003c/a\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/svg/I.svg\" target=\"_blank\"\u003eSVG\u003c/a\u003e\u003c/i\u003e\u003c/p\u003e\u003c/li\u003e\u003cli\u003e\u003cp\u003e\u003ci\u003eOne (1) Part J: Long side cover \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/pdf/J.pdf\" target=\"_blank\"\u003ePDF \u003c/a\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/svg/J.svg\" target=\"_blank\"\u003eSVG\u003c/a\u003e\u003c/i\u003e\u003c/p\u003e\u003c/li\u003e\u003cli\u003e\u003cp\u003e\u003ci\u003eOne (1) Part K: Top cover \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/pdf/K.pdf\" target=\"_blank\"\u003ePDF \u003c/a\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/svg/K.svg\" target=\"_blank\"\u003eSVG\u003c/a\u003e\u003c/i\u003e\u003c/p\u003e\u003c/li\u003e\u003cli\u003e\u003cp\u003e\u003ci\u003eOne (1) Part L: Optional top insert \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/pdf/L.pdf\" target=\"_blank\"\u003ePDF \u003c/a\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/svg/L.svg\" target=\"_blank\"\u003eSVG\u003c/a\u003e\u003c/i\u003e\u003c/p\u003e\u003c/li\u003e\u003c/ul\u003e\u003c/blockquote\u003e\u003cp\u003e36 M3-10 mm bolts\u003c/p\u003e\u003cp\u003e8 M3-40 mm bolts\u003c/p\u003e\u003cp\u003e36 M3 square nuts\u003c/p\u003e\u003cp\u003e2 M3 washers\u003c/p\u003e\u003cp\u003ePrinted copy of Assembly Instructions \u003c/p\u003e\u003cp\u003eTwo (2) \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/printed_parts/\" target=\"_blank\" style=\"background-color: rgb(255, 255, 255); font-size: inherit; font-style: inherit; font-variant-ligatures: inherit; font-variant-caps: inherit; font-weight: inherit; text-align: inherit;\"\u003e3D printed left brackets (STL)\u003c/a\u003e\u003c/p\u003e\u003cp\u003eTwo (2) \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/printed_parts/\" target=\"_blank\" style=\"background-color: rgb(255, 255, 255); font-size: inherit; font-style: inherit; font-variant-ligatures: inherit; font-variant-caps: inherit; font-weight: inherit; text-align: inherit;\"\u003e3D printed right bracket (STL)\u003c/a\u003e\u003c/p\u003e\u003cp\u003eOne (1) \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/printed_parts/\" target=\"_blank\" style=\"background-color: rgb(255, 255, 255); font-size: inherit; font-style: inherit; font-variant-ligatures: inherit; font-variant-caps: inherit; font-weight: inherit; text-align: inherit;\"\u003e3D printed Mini LCD bracket (STL)\u003c/a\u003e\u003c/p\u003e\u003cp\u003e\u003cem\u003eMini left and right brackets by \u003c/em\u003e\u003cem\u003eDavid Randolph \u0026amp; Printed Solid \u003c/em\u003e\u003cem\u003eused under the \u003ca href=\"https://creativecommons.org/licenses/by-sa/4.0/\" target=\"_blank\"\u003eCC BY-SA 4.0\u003c/a\u003e license.\u003c/em\u003e\u003c/p\u003e\u003ch4\u003eTools Needed\u003c/h4\u003e\u003cp\u003e2 mm hex driver\u003c/p\u003e\u003cp\u003e2.5 mm hex driver\u003c/p\u003e\u003cp\u003eOptional: Painters tape\u003c/p\u003e\u003cp\u003eOptional: Flat razor\u003c/p\u003e\u003ch4\u003eTime Required\u003c/h4\u003e\u003cp\u003e1-2 hours, based on skill level\u003c/p\u003e\u003ch4\u003ePhysical Dimensions\u003c/h4\u003e\u003cp\u003eLulzBot Mini Dimensions (Standard): 435 mm x 340 mm x 385 mm (17.1 in x 13.4 in x 15.2 in)\u003c/p\u003e\u003cp\u003eLulzBot Mini Dimensions (with Enclosure): 435 mm x 445 mm x 385 mm (17.1 in x 17.5 in x 15.2 in)\u003c/p\u003e\u003cp\u003eEnclosure adds an additional 105 mm (4.1 in) in the Y-axis (from front to back).\u003c/p\u003e\u003ch4\u003eWarnings\u003c/h4\u003e\u003cp\u003eAcrylic can easily crack - do not over tighten the screws. Tighten to hold without movement.\u003c/p\u003e\u003cp\u003eWhen cleaning, use dish soap or hand wash and a soft, clean cloth. Do not use Windex® or other glass cleaning solutions. Do not use a hard sponge, scrub, or abrasive surface.\u003c/p\u003e\u003cp\u003e\u003cem\u003eWindex is a registered trademark of S.C. Johnson, Inc.\u003c/em\u003e\u003c/p\u003e\u003ch4\u003eSupport Information\u003c/h4\u003e\u003cp\u003eHave questions? Contact the sales support team by emailing \u003ca href=\"mailto:Sales@LulzBot.com?subject=LulzBot TAZ 6 Enclosure\"\u003eSales@LulzBot.com\u003c/a\u003e or by calling +1-970-377-1111.\u003c/p\u003e","description_resources_documentation":"\u003ch4\u003eMore Information\u003c/h4\u003e\u003cp\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/production_docs/LulzBot_Mini2-ABSplus_Enclosure_Instructions.pdf\" target=\"_blank\"\u003eAssembly Instructions\u003c/a\u003e\u003c/p\u003e\u003cp\u003e\u003cbr\u003e\u003c/p\u003e\u003ch4\u003eSource Files\u003c/h4\u003e\u003cp\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/\" target=\"_blank\"\u003eSource\u003c/a\u003e\u003c/p\u003e\u003ch4\u003ePrinted Part Files\u003c/h4\u003e\u003cp\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/printed_parts/\" target=\"_blank\"\u003e3D printed left brackets (STL)\u003c/a\u003e\u003c/p\u003e\u003cp\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/printed_parts/\" target=\"_blank\"\u003e3D printed right bracket (STL)\u003c/a\u003e\u003c/p\u003e\u003cp\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/printed_parts/\" target=\"_blank\"\u003e3D printed Mini LCD bracket (STL)\u003c/a\u003e\u003c/p\u003e\u003cp\u003e\u003cem\u003eMini left and right brackets by David Randolph \u0026amp; Printed Solid used under the \u003ca href=\"https://creativecommons.org/licenses/by-sa/4.0/\" target=\"_blank\"\u003eCC BY-SA 4.0\u003c/a\u003e license. See recommended print settings in Step 1 of the Assembly Instructions. \u003c/em\u003e\u003c/p\u003e\u003cp\u003eLulzBot Mini Enclosure Bracket for LCD (STL) for installation with LulzBot Graphical LCD Controller and LulzBot Mini 2 \u003c/p\u003e\u003cp\u003e\u003cem\u003eBracket by David Randolph \u0026amp; Printed Solid used under the \u003ca href=\"https://creativecommons.org/licenses/by/3.0/\" target=\"_blank\"\u003eCC BY-SA 3.0\u003c/a\u003e license. \u003c/em\u003e\u003c/p\u003e\u003ch4\u003eEmissions and Ultra-fine Particles\u003c/h4\u003e\u003cp\u003eThis is an enclosure designed to minimize the effects of the ambient environment around your printer and keep curious hands and paws away from the heated and moving components of your 3D printer. It does include a built-in location for mounting a 40 mm fan to vent air from the chamber and further modifications can be made.\u003c/p\u003e\u003cp\u003eUsers concerned about emissions and ultra-fine articles should instead use materials made from Eastman Amphora co-polyesters such as\u003ca href=\"https://shop.lulzbot.com/colorfabb-ngen-filament?ref=RM-MS0033\" target=\"_blank\"\u003e colorFabb nGen\u003c/a\u003e and \u003ca href=\"https://shop.lulzbot.com/chroma-strand-inova-1800-filament?ref=RM-NY0018\" target=\"_blank\"\u003eChroma Strand Labs INOVA-1800\u003c/a\u003e. For more information, read the \u003ca href=\"https://www.lulzbot.com/sites/default/files/guide_to_printing_with_Amphora-SPMBS1497.pdf\" target=\"_blank\"\u003eGuide to printing Eastman Amphora (PDF)\u003c/a\u003e and the \u003ca href=\"https://pubs.acs.org/doi/pdf/10.1021/acs.est.5b04983\" target=\"_blank\"\u003eultrafine particles emission study (PDF)\u003c/a\u003e.\u003c/p\u003e\u003cp\u003e\u003cbr\u003e\u003c/p\u003e\u003ch4\u003eWarnings\u003c/h4\u003e\u003cp\u003eAcrylic can easily crack - do not over tighten the screws. Tighten to hold without movement. \u003c/p\u003e\u003cp\u003eWhen cleaning, use dish soap or hand wash and a soft, clean cloth. Do not use Windex® or other glass cleaning solutions. Do not use a hard sponge, scrub, or abrasive surface. \u003c/p\u003e\u003cp\u003e\u003cem\u003eWindex is a registered trademark of S.C. Johnson, Inc.\u003c/em\u003e\u003c/p\u003e\u003ch4\u003eSupport Information\u003c/h4\u003e\u003cp\u003eHave questions? Contact the sales support team by emailing \u003ca href=\"mailto:Sales@LulzBot.com?subject=LulzBot TAZ 6 Enclosure\"\u003eSales@LulzBot.com\u003c/a\u003e or by calling +1-970-377-1111.\u003c/p\u003e","description_features":"\u003cp\u003eThis enclosure is made with optically clear, lightweight 3 mm thick extruded acrylic and rugged ABS panels. Assembly and installation is easy as this kit contains all the necessary hardware, including the four 3D printed corner brackets.\u003c/p\u003e\u003cp\u003eAdvanced users can mount a 40 mm fan to vent air from the enclosure, add filtration, and more. When assembled, this enclosure only adds 105 mm (4.1 in) along the length of the Y-axis ( front to back).\u003c/p\u003e","featured":false,"variant_selector":[],"stock":{"global":{"state":"in_stock"}},"brand":null,"images":[{"small":{"src":"https://assets.lulzbot.com/mini-2-abs-enclosure_60_60-12665.jpg","alt":"Mini 2 ABS+ Enclosure","tag":""},"medium":{"src":"https://assets.lulzbot.com/mini-2-abs-enclosure_300_300-12666.jpg","alt":"Mini 2 ABS+ Enclosure","tag":""},"large":{"src":"https://assets.lulzbot.com/mini-2-abs-enclosure_500_500-12667.jpg","alt":"Mini 2 ABS+ Enclosure","tag":""}},{"small":{"src":"https://assets.lulzbot.com/mini-2-abs-enclosure_60_60-12668.jpg","alt":"Mini 2 ABS+ Enclosure","tag":""},"medium":{"src":"https://assets.lulzbot.com/mini-2-abs-enclosure_300_300-12669.jpg","alt":"Mini 2 ABS+ Enclosure","tag":""},"large":{"src":"https://assets.lulzbot.com/mini-2-abs-enclosure_500_500-12670.jpg","alt":"Mini 2 ABS+ Enclosure","tag":""}}],"slides_group":[],"variant_attributes_group":{},"id":1224,"pack_ok":false,"used_in_pack":[{"objectID":9763},{"objectID":9764},{"objectID":9786},{"objectID":9789}],"index_name":"products"}
{"objectID":4264,"model":{"name":"Mini 2 ABS+ Enclosure"},"url_key":"store/mini-2-abs-enclosure-kt-fp0034","redirect_url_key":["lulzbot-mini-2-enclosure-abs-kt-fp0034","lulzbot-mini-2-abs-enclosure-kt-fp0034","lulzbot-mini-abs-enclosure-kt-fp0034","mini-2-abs-enclosure-kt-fp0034"],"main":true,"short_description":"\u003cp\u003eUse this 3D printer enclosure with your LulzBot Mini to minimize warping and cracking caused by printing in cold and drafty environments while keeping curious hands and paws away from heated and moving parts of your 3D printer. This enclosure features a strengthened design with ABS panels, LulzBot branded laser-etched acrylic, and comes ready to assemble with all components provided (no 3D printing required).\u003c/p\u003e\u003cp\u003ePerfect for:\u003c/p\u003e\u003cul style=\"margin-top: 0.67rem;\"\u003e\u003cli\u003eCold and/or drafty environments\u003c/li\u003e\u003cli\u003ePrinting materials with high shrink rates, like ABS, Nylons (Polyamides), and Polycarbonates\u003c/li\u003e\u003cli\u003eClassrooms, Libraries, and high-traffic areas with curious hands\u003c/li\u003e\u003c/ul\u003e","description":"\u003cp\u003e\u003cbr\u003e\u003c/p\u003e","name":"Mini 2 ABS+ Enclosure","short_name":"","seo_title":"LulzBot Mini ABS+ Enclosure | 3D Printer Acrylic Enclosure | LulzBot","meta_keywords":null,"meta_description":"Keep curious hands away from your 3D printer with this acrylic enclosure from LulzBot. Use this enclosure with your LulzBot Mini to minimize warping cause by cold environments.","variant_count":1,"categories":[{"id":12,"name":"Accessories","url_key":"store/accessories","level":0}],"sku":"KT-FP0034","variant_attributes":{},"price":{"value":200.0,"tax_included":false,"original_value":200.0,"discount":0.0},"hierarchicalCategories":[{"level":1,"value":"Accessories","ancestors":["All"],"order":8}],"filament_material":[],"compatibility":[{"name":"LulzBot Mini v2.0, Boxed for Retail, AU"},{"name":"LulzBot Mini v2.0, Boxed for Retail, EU"},{"name":"LulzBot Mini v2.0, Boxed for Retail, NA"}],"description_parts_specification":"\u003ch4\u003eParts Included\u003c/h4\u003e\u003cp\u003eLaser cut, extruded 3 mm thick acrylic sheets and ABS panels \u003c/p\u003e\u003cblockquote data-o-mail-quote=\"1\"\u003e\u003cul\u003e\u003cli\u003e\u003cp\u003e\u003ci\u003eTwo (2) Part A: Front and rear panel with logo \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/pdf/A.pdf\" target=\"_blank\"\u003ePDF \u003c/a\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/svg/A.svg\" target=\"_blank\"\u003eSVG\u003c/a\u003e\u003c/i\u003e\u003c/p\u003e\u003c/li\u003e\u003cli\u003e\u003cp\u003e\u003ci\u003eTwo (2) Part B: Rear cover sides \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/pdf/B.pdf\" target=\"_blank\"\u003ePDF \u003c/a\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/svg/B.svg\" target=\"_blank\"\u003eSVG\u003c/a\u003e\u003c/i\u003e\u003c/p\u003e\u003c/li\u003e\u003cli\u003e\u003cp\u003e\u003ci\u003eOne (1) Part C: Rear cover top \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/pdf/C.pdf\" target=\"_blank\"\u003ePDF \u003c/a\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/svg/C.svg\" target=\"_blank\"\u003eSVG\u003c/a\u003e\u003c/i\u003e\u003c/p\u003e\u003c/li\u003e\u003cli\u003e\u003cp\u003e\u003ci\u003eOne (1) Part D: Rear cover bottom \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/pdf/D.pdf\" target=\"_blank\"\u003ePDF \u003c/a\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/svg/D.svg\" target=\"_blank\"\u003eSVG\u003c/a\u003e\u003c/i\u003e\u003c/p\u003e\u003c/li\u003e\u003cli\u003e\u003cp\u003e\u003ci\u003eOne (1) Part E: Front cover sides \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/pdf/E.pdf\" target=\"_blank\"\u003ePDF \u003c/a\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/svg/E.svg\" target=\"_blank\"\u003eSVG\u003c/a\u003e\u003c/i\u003e\u003c/p\u003e\u003c/li\u003e\u003cli\u003e\u003cp\u003e\u003ci\u003eOne (1) Part F: Front cover top \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/pdf/F.pdf\" target=\"_blank\"\u003ePDF \u003c/a\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/svg/F.svg\" target=\"_blank\"\u003eSVG\u003c/a\u003e\u003c/i\u003e\u003c/p\u003e\u003c/li\u003e\u003cli\u003e\u003cp\u003e\u003ci\u003eOne (1) Part G: Front cover bottom \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/pdf/G.pdf\" target=\"_blank\"\u003ePDF \u003c/a\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/svg/G.svg\" target=\"_blank\"\u003eSVG\u003c/a\u003e\u003c/i\u003e\u003c/p\u003e\u003c/li\u003e\u003cli\u003e\u003cp\u003e\u003ci\u003eTwo (2) Part H: Front and rear cover stiffener \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/pdf/H.pdf\" target=\"_blank\"\u003ePDF \u003c/a\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/svg/H.svg\" target=\"_blank\"\u003eSVG\u003c/a\u003e\u003c/i\u003e\u003c/p\u003e\u003c/li\u003e\u003cli\u003e\u003cp\u003e\u003ci\u003eOne (1) Part I: Short side cover \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/pdf/I.pdf\" target=\"_blank\"\u003ePDF \u003c/a\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/svg/I.svg\" target=\"_blank\"\u003eSVG\u003c/a\u003e\u003c/i\u003e\u003c/p\u003e\u003c/li\u003e\u003cli\u003e\u003cp\u003e\u003ci\u003eOne (1) Part J: Long side cover \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/pdf/J.pdf\" target=\"_blank\"\u003ePDF \u003c/a\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/svg/J.svg\" target=\"_blank\"\u003eSVG\u003c/a\u003e\u003c/i\u003e\u003c/p\u003e\u003c/li\u003e\u003cli\u003e\u003cp\u003e\u003ci\u003eOne (1) Part K: Top cover \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/pdf/K.pdf\" target=\"_blank\"\u003ePDF \u003c/a\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/svg/K.svg\" target=\"_blank\"\u003eSVG\u003c/a\u003e\u003c/i\u003e\u003c/p\u003e\u003c/li\u003e\u003cli\u003e\u003cp\u003e\u003ci\u003eOne (1) Part L: Optional top insert \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/pdf/L.pdf\" target=\"_blank\"\u003ePDF \u003c/a\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/svg/L.svg\" target=\"_blank\"\u003eSVG\u003c/a\u003e\u003c/i\u003e\u003c/p\u003e\u003c/li\u003e\u003c/ul\u003e\u003c/blockquote\u003e\u003cp\u003e36 M3-10 mm bolts\u003c/p\u003e\u003cp\u003e8 M3-40 mm bolts\u003c/p\u003e\u003cp\u003e36 M3 square nuts\u003c/p\u003e\u003cp\u003e2 M3 washers\u003c/p\u003e\u003cp\u003ePrinted copy of Assembly Instructions \u003c/p\u003e\u003cp\u003eTwo (2) \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/printed_parts/\" target=\"_blank\" style=\"background-color: rgb(255, 255, 255); font-size: inherit; font-style: inherit; font-variant-ligatures: inherit; font-variant-caps: inherit; font-weight: inherit; text-align: inherit;\"\u003e3D printed left brackets (STL)\u003c/a\u003e\u003c/p\u003e\u003cp\u003eTwo (2) \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/printed_parts/\" target=\"_blank\" style=\"background-color: rgb(255, 255, 255); font-size: inherit; font-style: inherit; font-variant-ligatures: inherit; font-variant-caps: inherit; font-weight: inherit; text-align: inherit;\"\u003e3D printed right bracket (STL)\u003c/a\u003e\u003c/p\u003e\u003cp\u003eOne (1) \u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/printed_parts/\" target=\"_blank\" style=\"background-color: rgb(255, 255, 255); font-size: inherit; font-style: inherit; font-variant-ligatures: inherit; font-variant-caps: inherit; font-weight: inherit; text-align: inherit;\"\u003e3D printed Mini LCD bracket (STL)\u003c/a\u003e\u003c/p\u003e\u003cp\u003e\u003cem\u003eMini left and right brackets by \u003c/em\u003e\u003cem\u003eDavid Randolph \u0026amp; Printed Solid \u003c/em\u003e\u003cem\u003eused under the \u003ca href=\"https://creativecommons.org/licenses/by-sa/4.0/\" target=\"_blank\"\u003eCC BY-SA 4.0\u003c/a\u003e license.\u003c/em\u003e\u003c/p\u003e\u003ch4\u003eTools Needed\u003c/h4\u003e\u003cp\u003e2 mm hex driver\u003c/p\u003e\u003cp\u003e2.5 mm hex driver\u003c/p\u003e\u003cp\u003eOptional: Painters tape\u003c/p\u003e\u003cp\u003eOptional: Flat razor\u003c/p\u003e\u003ch4\u003eTime Required\u003c/h4\u003e\u003cp\u003e1-2 hours, based on skill level\u003c/p\u003e\u003ch4\u003ePhysical Dimensions\u003c/h4\u003e\u003cp\u003eLulzBot Mini Dimensions (Standard): 435 mm x 340 mm x 385 mm (17.1 in x 13.4 in x 15.2 in)\u003c/p\u003e\u003cp\u003eLulzBot Mini Dimensions (with Enclosure): 435 mm x 445 mm x 385 mm (17.1 in x 17.5 in x 15.2 in)\u003c/p\u003e\u003cp\u003eEnclosure adds an additional 105 mm (4.1 in) in the Y-axis (from front to back).\u003c/p\u003e\u003ch4\u003eWarnings\u003c/h4\u003e\u003cp\u003eAcrylic can easily crack - do not over tighten the screws. Tighten to hold without movement.\u003c/p\u003e\u003cp\u003eWhen cleaning, use dish soap or hand wash and a soft, clean cloth. Do not use Windex® or other glass cleaning solutions. Do not use a hard sponge, scrub, or abrasive surface.\u003c/p\u003e\u003cp\u003e\u003cem\u003eWindex is a registered trademark of S.C. Johnson, Inc.\u003c/em\u003e\u003c/p\u003e\u003ch4\u003eSupport Information\u003c/h4\u003e\u003cp\u003eHave questions? Contact the sales support team by emailing \u003ca href=\"mailto:Sales@LulzBot.com?subject=LulzBot TAZ 6 Enclosure\"\u003eSales@LulzBot.com\u003c/a\u003e or by calling +1-970-377-1111.\u003c/p\u003e","description_resources_documentation":"\u003ch4\u003eMore Information\u003c/h4\u003e\u003cp\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/production_docs/LulzBot_Mini2-ABSplus_Enclosure_Instructions.pdf\" target=\"_blank\"\u003eAssembly Instructions\u003c/a\u003e\u003c/p\u003e\u003cp\u003e\u003cbr\u003e\u003c/p\u003e\u003ch4\u003eSource Files\u003c/h4\u003e\u003cp\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/\" target=\"_blank\"\u003eSource\u003c/a\u003e\u003c/p\u003e\u003ch4\u003ePrinted Part Files\u003c/h4\u003e\u003cp\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/printed_parts/\" target=\"_blank\"\u003e3D printed left brackets (STL)\u003c/a\u003e\u003c/p\u003e\u003cp\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/printed_parts/\" target=\"_blank\"\u003e3D printed right bracket (STL)\u003c/a\u003e\u003c/p\u003e\u003cp\u003e\u003ca href=\"https://download.lulzbot.com/retail_parts/Completed_Parts/LulzBot_Mini2_ABS_Enclosure/printed_parts/\" target=\"_blank\"\u003e3D printed Mini LCD bracket (STL)\u003c/a\u003e\u003c/p\u003e\u003cp\u003e\u003cem\u003eMini left and right brackets by David Randolph \u0026amp; Printed Solid used under the \u003ca href=\"https://creativecommons.org/licenses/by-sa/4.0/\" target=\"_blank\"\u003eCC BY-SA 4.0\u003c/a\u003e license. See recommended print settings in Step 1 of the Assembly Instructions. \u003c/em\u003e\u003c/p\u003e\u003cp\u003eLulzBot Mini Enclosure Bracket for LCD (STL) for installation with LulzBot Graphical LCD Controller and LulzBot Mini 2 \u003c/p\u003e\u003cp\u003e\u003cem\u003eBracket by David Randolph \u0026amp; Printed Solid used under the \u003ca href=\"https://creativecommons.org/licenses/by/3.0/\" target=\"_blank\"\u003eCC BY-SA 3.0\u003c/a\u003e license. \u003c/em\u003e\u003c/p\u003e\u003ch4\u003eEmissions and Ultra-fine Particles\u003c/h4\u003e\u003cp\u003eThis is an enclosure designed to minimize the effects of the ambient environment around your printer and keep curious hands and paws away from the heated and moving components of your 3D printer. It does include a built-in location for mounting a 40 mm fan to vent air from the chamber and further modifications can be made.\u003c/p\u003e\u003cp\u003eUsers concerned about emissions and ultra-fine articles should instead use materials made from Eastman Amphora co-polyesters such as\u003ca href=\"https://shop.lulzbot.com/colorfabb-ngen-filament?ref=RM-MS0033\" target=\"_blank\"\u003e colorFabb nGen\u003c/a\u003e and \u003ca href=\"https://shop.lulzbot.com/chroma-strand-inova-1800-filament?ref=RM-NY0018\" target=\"_blank\"\u003eChroma Strand Labs INOVA-1800\u003c/a\u003e. For more information, read the \u003ca href=\"https://www.lulzbot.com/sites/default/files/guide_to_printing_with_Amphora-SPMBS1497.pdf\" target=\"_blank\"\u003eGuide to printing Eastman Amphora (PDF)\u003c/a\u003e and the \u003ca href=\"https://pubs.acs.org/doi/pdf/10.1021/acs.est.5b04983\" target=\"_blank\"\u003eultrafine particles emission study (PDF)\u003c/a\u003e.\u003c/p\u003e\u003cp\u003e\u003cbr\u003e\u003c/p\u003e\u003ch4\u003eWarnings\u003c/h4\u003e\u003cp\u003eAcrylic can easily crack - do not over tighten the screws. Tighten to hold without movement. \u003c/p\u003e\u003cp\u003eWhen cleaning, use dish soap or hand wash and a soft, clean cloth. Do not use Windex® or other glass cleaning solutions. Do not use a hard sponge, scrub, or abrasive surface. \u003c/p\u003e\u003cp\u003e\u003cem\u003eWindex is a registered trademark of S.C. Johnson, Inc.\u003c/em\u003e\u003c/p\u003e\u003ch4\u003eSupport Information\u003c/h4\u003e\u003cp\u003eHave questions? Contact the sales support team by emailing \u003ca href=\"mailto:Sales@LulzBot.com?subject=LulzBot TAZ 6 Enclosure\"\u003eSales@LulzBot.com\u003c/a\u003e or by calling +1-970-377-1111.\u003c/p\u003e","description_features":"\u003cp\u003eThis enclosure is made with optically clear, lightweight 3 mm thick extruded acrylic and rugged ABS panels. Assembly and installation is easy as this kit contains all the necessary hardware, including the four 3D printed corner brackets.\u003c/p\u003e\u003cp\u003eAdvanced users can mount a 40 mm fan to vent air from the enclosure, add filtration, and more. When assembled, this enclosure only adds 105 mm (4.1 in) along the length of the Y-axis ( front to back).\u003c/p\u003e","featured":false,"variant_selector":[],"stock":{"global":{"state":"in_stock"}},"brand":null,"images":[{"small":{"src":"https://assets.lulzbot.com/mini-2-abs-enclosure_60_60-12665.jpg","alt":"Mini 2 ABS+ Enclosure","tag":""},"medium":{"src":"https://assets.lulzbot.com/mini-2-abs-enclosure_300_300-12666.jpg","alt":"Mini 2 ABS+ Enclosure","tag":""},"large":{"src":"https://assets.lulzbot.com/mini-2-abs-enclosure_500_500-12667.jpg","alt":"Mini 2 ABS+ Enclosure","tag":""}},{"small":{"src":"https://assets.lulzbot.com/mini-2-abs-enclosure_60_60-12668.jpg","alt":"Mini 2 ABS+ Enclosure","tag":""},"medium":{"src":"https://assets.lulzbot.com/mini-2-abs-enclosure_300_300-12669.jpg","alt":"Mini 2 ABS+ Enclosure","tag":""},"large":{"src":"https://assets.lulzbot.com/mini-2-abs-enclosure_500_500-12670.jpg","alt":"Mini 2 ABS+ Enclosure","tag":""}}],"slides_group":[],"variant_attributes_group":{},"id":1224,"pack_ok":false,"used_in_pack":[{"objectID":9763},{"objectID":9764},{"objectID":9786},{"objectID":9789}],"index_name":"products"}
.
A notice about cookies

This website uses cookies. By continuing to browse this site, you agree to their use.

See all options