It doesn't appear to have affected your data, but our technical staff have been automatically notified and will be looking into this with the utmost urgency.
Mini 2/SK 289 Magnetic Flex Bed v2
Enjoy the convenience of removing prints easily from our OctoGrab™ Magnetic Bed system! The special high-temperature neodymium magnets embedded in the 1/8" thick machined aluminum plate can hold high temperature print jobs for extended durations without losing any magnetic field strength over time, unlike standard print bed magnets which can start losing field strength around 100C°.
Instead of struggling to remove parts directly from your 3D printer, you can now quickly remove the entire OctoGrab™ spring steel PEI sheet from the print bed along with your finished 3D printed part. Take your magnetic OctoGrab™ spring steel print surface and the finished part to a comfortable work area, bend the flexible OctoGrab™ spring steel bed in any direction, and your 3D print should release from the smooth PEI surface with ease.
This simple upgrade to your LulzBot 3D printer can make a big difference in your printing experience. TPU handles on the OctoGrab™ spring steel print surface allow for easy removal of the print bed while still warm and aids in realigning the surface when replacing the print surface on the magnetic bed.
If your LulzBot Mini 1 or Mini 2 already has a LulzBot Mini Modular Print Bed System installed, this upgrade simply replaces your Glass/PEI Print Surface. If you do not already have the Mini Etched Modular Print Bed Heater you must also purchase one with your OctoGrab™ Magnetic Flex Bed.
Not compatible if your Mini 1 is version 1.03 or has a serial number of KT-PR0035NA-7499 or lower.
To upgrade, simply remove the four bed leveling washers and existing glass/PEI bed from your Mini Etched Modular Print Bed Heater equipped Mini 1 or 2. Insert the OctoGrab™ aluminum magnetic base on top of the Mini Etched Modular Print Bed Heater and replace your bed leveling washers.
Important: Adjust your Z offset to the new print surface and start printing!
After prolonged use, you may need to clean your OctoGrab™ surface with a 50/50 mix of isopropyl alcohol and water to renew its adhesion abilities. Allow the surface to dry completely before printing.
Mini 2/SK 289 Magnetic Flex Bed v2
$
65
00
65.0
{"objectID":10076,"model":{"name":"Mini 2/SK 289 Magnetic Flex Bed v2"},"url_key":"store/mini-2-sk-289-magnetic-flex-bed-v2-kt-hb0036","redirect_url_key":[],"main":true,"short_description":"\u003cp\u003eEnjoy the convenience of removing prints easily from our OctoGrab™ Magnetic Bed system! The special high-temperature neodymium magnets embedded in the 1/8\" thick machined aluminum plate can hold high temperature print jobs for extended durations without losing any magnetic field strength over time, unlike standard print bed magnets which can start losing field strength around 100C°.\u003c/p\u003e\u003cp\u003e\u003cbr\u003e\u003c/p\u003e\u003cp\u003e\u003cbr\u003e\u003c/p\u003e\u003cp\u003e*If you do not already have the \u003ca href=\"https://shop.lulzbot.com/lulzbot-mini-etched-modular-print-bed-heater-kt-hb0015?ref=KT-HB0015\"\u003eMini Etched Modular Print Bed Heater\u003c/a\u003e you must also purchase one with your OctoGrab™ Magnetic Flex Bed.\u003cbr\u003e\u003c/p\u003e","description":"\u003cp\u003e\u003cb\u003eQuick \u0026amp; Easy Upgrade\u003c/b\u003e\u003c/p\u003e\u003cp\u003eUpgrading is easy. \u003c/p\u003e\u003cp\u003e\u003cbr\u003e\u003c/p\u003e\u003cp\u003eIf your LulzBot Mini 1 or Mini 2 already has a LulzBot Mini Modular Print Bed System installed, this upgrade simply replaces your Glass/PEI Print Surface. \u003cb\u003e If you do not already have the \u003ca href=\"https://shop.lulzbot.com/lulzbot-mini-etched-modular-print-bed-heater-kt-hb0015?ref=KT-HB0015\"\u003eMini Etched Modular Print Bed Heater\u003c/a\u003e you must also purchase one with your OctoGrab™ Magnetic Flex Bed. \u003c/b\u003e\u003c/p\u003e\u003cp\u003e\u003ci\u003e\u003cfont style=\"color: rgb(255, 0, 0);\"\u003eNot compatible if your Mini 1 is version 1.03 or has a serial number of KT-PR0035NA-7499 or lower.\u003c/font\u003e\u003c/i\u003e\u003c/p\u003e\u003cp\u003e\u003cb\u003e\u003cbr\u003e\u003c/b\u003e\u003c/p\u003e\u003cp\u003eTo upgrade, simply remove the four bed leveling washers and existing glass/PEI bed from your Mini Etched Modular Print Bed Heater equipped Mini 1 or 2. Insert the OctoGrab™ aluminum magnetic base on top of the Mini Etched Modular Print Bed Heater and replace your bed leveling washers.\u003c/p\u003e\u003cp\u003e\u003cbr\u003e\u003c/p\u003e\u003cp\u003e\u003ci\u003eImportant: Adjust your Z offset to the new print surface and start printing!\u003c/i\u003e\u003c/p\u003e\u003cp\u003e\u003cbr\u003e\u003c/p\u003e\u003cp\u003eAfter prolonged use, you may need to clean your OctoGrab™ surface with a 50/50 mix of isopropyl alcohol and water to renew its adhesion abilities. Allow the surface to dry completely before printing.\u003c/p\u003e","name":"Mini 2/SK 289 Magnetic Flex Bed v2","short_name":"","seo_title":"Mini 2/SK 289 Magnetic Flex Bed v2 | LulzBot","meta_keywords":null,"meta_description":"Machined for precision accuracy , the latest flex bed system for your SideKick 289 or Mini 2 from LulzBot is now available.","variant_count":1,"categories":[{"id":4,"name":"Parts","url_key":"store/parts","level":0},{"id":37,"name":"Bed Platforms \u0026 Components","url_key":"store/parts/bed-platforms-components","level":1}],"sku":"KT-HB0036","variant_attributes":{},"price":{"value":65.0,"tax_included":false,"original_value":65.0,"discount":0.0},"hierarchicalCategories":[{"level":1,"value":"Parts","ancestors":["All"],"order":18},{"level":2,"value":"Bed Platforms \u0026 Components","ancestors":["Parts","All"],"order":20}],"filament_material":[],"compatibility":[{"name":"LulzBot 3D Printer, Mini 2, Boxed for Retail, NA"},{"name":"LulzBot 3D Printer, TAZ SideKick 289, Boxed for Retail, NA"}],"description_parts_specification":"\u003cul\u003e\u003cli\u003e\u003cp\u003eMini 2/SK 289 dimensions: 170mm x 170mm.\u003c/p\u003e\u003c/li\u003e\u003cli\u003e\u003cp\u003e16 N50 neodymium rare earth magnets.\u003c/p\u003e\u003c/li\u003e\u003cli\u003e\u003cp\u003eWorks with the Mini Etched Modular Bed Heater.\u003c/p\u003e\u003c/li\u003e\u003cli\u003e\u003cp\u003eThe spring steel has our standard PEI laminate pre-attached on the print side, polycarbonate on the back.*\u003c/p\u003e\u003c/li\u003e\u003c/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c/p\u003e\u003cp\u003e\u003ci\u003e*print on top side only\u003c/i\u003e\u003c/p\u003e\u003cp\u003e\u003cbr\u003e\u003c/p\u003e\u003cp\u003e\u003cbr\u003e\u003c/p\u003e\u003cp\u003e\u003cfont style=\"font-size: 9px;\"\u003eOctograb was derived from work by Tim Pierce in the LulzBot community.\u003c/font\u003e\u003c/p\u003e","description_resources_documentation":"\u003cp\u003eParts required for this upgrade:\u003c/p\u003e\u003cp\u003e\u003cbr\u003e\u003c/p\u003e\u003col\u003e\u003cli\u003e\u003cp\u003eLulzBot Mini 1 or Mini 2 or SideKick 289.\u003c/p\u003e\u003c/li\u003e\u003cli\u003e\u003cp\u003e\u003ca href=\"https://shop.lulzbot.com/lulzbot-mini-etched-modular-print-bed-heater-kt-hb0015?ref=KT-HB0015\"\u003eMini Etched Modular Print Bed Heater.\u003c/a\u003e\u003c/p\u003e\u003c/li\u003e\u003cli\u003e\u003cp\u003eOctoGrab™ Mini Magnetic Flex Bed Assembly.\u003c/p\u003e\u003c/li\u003e\u003c/ol\u003e\u003cp\u003e\u003cbr\u003e\u003c/p\u003e\u003cul\u003e\u003cli\u003e\u003cp\u003e\u003ca href=\"https://ohai.lulzbot.com/project/Mini-OctoGrab/accessories/\"\u003eInstallation Instructions OHAI for Mini ➡\u003c/a\u003e\u003c/p\u003e\u003c/li\u003e\u003cli\u003e\u003cp\u003e\u003ca href=\"https://ohai.lulzbot.com/project/lulzbot-taz-sidekick-flexible-bed-installation/accessories/\"\u003eInstallation Instructions OHAI for TAZ SideKick ➡\u003c/a\u003e\u003c/p\u003e\u003c/li\u003e\u003c/ul\u003e","description_features":"\u003cp\u003e\u003cb\u003eMake Print Removal More Convenient\u003c/b\u003e\u003c/p\u003e\u003cp\u003e\u003cbr\u003e\u003c/p\u003e\u003cp\u003eInstead of struggling to remove parts directly from your 3D printer, you can now quickly remove the entire OctoGrab™ spring steel PEI sheet from the print bed along with your finished 3D printed part. Take your magnetic OctoGrab™ spring steel print surface and the finished part to a comfortable work area, bend the flexible OctoGrab™ spring steel bed in any direction, and your 3D print should release from the smooth PEI surface with ease.\u003c/p\u003e\u003cp\u003e\u003cbr\u003e\u003c/p\u003e\u003cp\u003eThis simple upgrade to your LulzBot 3D printer can make a big difference in your printing experience. TPU handles on the OctoGrab™ spring steel print surface allow for easy removal of the print bed while still warm and aids in realigning the surface when replacing the print surface on the magnetic bed.\u003c/p\u003e","featured":false,"variant_selector":[],"stock":{"global":{"state":"out_of_stock"}},"brand":null,"images":[{"small":{"src":"https://assets.lulzbot.com/mini-2-sk-289-magnetic-flex-bed-v2_60_60-18110.jpg","alt":"Mini 2/SK 289 Magnetic Flex Bed v2","tag":""},"medium":{"src":"https://assets.lulzbot.com/mini-2-sk-289-magnetic-flex-bed-v2_300_300-18111.jpg","alt":"Mini 2/SK 289 Magnetic Flex Bed v2","tag":""},"large":{"src":"https://assets.lulzbot.com/mini-2-sk-289-magnetic-flex-bed-v2_500_500-18112.jpg","alt":"Mini 2/SK 289 Magnetic Flex Bed v2","tag":""}},{"small":{"src":"https://assets.lulzbot.com/mini-2-sk-289-magnetic-flex-bed-v2_60_60-16948.jpg","alt":"Mini 2/SK 289 Magnetic Flex Bed v2","tag":""},"medium":{"src":"https://assets.lulzbot.com/mini-2-sk-289-magnetic-flex-bed-v2_300_300-16949.jpg","alt":"Mini 2/SK 289 Magnetic Flex Bed v2","tag":""},"large":{"src":"https://assets.lulzbot.com/mini-2-sk-289-magnetic-flex-bed-v2_500_500-16950.jpg","alt":"Mini 2/SK 289 Magnetic Flex Bed v2","tag":""}},{"small":{"src":"https://assets.lulzbot.com/mini-2-sk-289-magnetic-flex-bed-v2_60_60-17002.jpg","alt":"Mini 2/SK 289 Magnetic Flex Bed v2","tag":""},"medium":{"src":"https://assets.lulzbot.com/mini-2-sk-289-magnetic-flex-bed-v2_300_300-17003.jpg","alt":"Mini 2/SK 289 Magnetic Flex Bed v2","tag":""},"large":{"src":"https://assets.lulzbot.com/mini-2-sk-289-magnetic-flex-bed-v2_500_500-17004.jpg","alt":"Mini 2/SK 289 Magnetic Flex Bed v2","tag":""}},{"small":{"src":"https://assets.lulzbot.com/mini-2-sk-289-magnetic-flex-bed-v2_60_60-16951.jpg","alt":"Mini 2/SK 289 Magnetic Flex Bed v2","tag":""},"medium":{"src":"https://assets.lulzbot.com/mini-2-sk-289-magnetic-flex-bed-v2_300_300-16952.jpg","alt":"Mini 2/SK 289 Magnetic Flex Bed v2","tag":""},"large":{"src":"https://assets.lulzbot.com/mini-2-sk-289-magnetic-flex-bed-v2_500_500-16953.jpg","alt":"Mini 2/SK 289 Magnetic Flex Bed v2","tag":""}}],"slides_group":[],"variant_attributes_group":{},"id":5380,"pack_ok":false,"used_in_pack":[],"index_name":"products"}